Datasheet4U Logo Datasheet4U.com

ACE4722 - Multi-Chemistry Battery Charger

Description

The ACE4722(Note 1) is a PWM switch-mode battery charger controller that can be powered by photovoltaic cell with maximum power point tracking function.

Features

  • include undervoltage lockout, battery temperature monitoring and status indication, etc. Features.
  • Photovoltaic Cell Maximum Power Point Tracking Wide Input Voltage: 7.5V to 28V Complete Charger Controller for 1 or multi-cell Lithium-ion Battery or LiFePO4 Battery Charge Current Up to 5A High PWM Switching Frequency: 300KHz Constant Charging Voltage Set By the External Resistor Divider Chargin.

📥 Download Datasheet

Datasheet Details

Part number ACE4722
Manufacturer ACE Technology
File Size 397.15 KB
Description Multi-Chemistry Battery Charger
Datasheet download datasheet ACE4722 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACE4000 3 Bay / 12 Kilowatt Power Shelf Lineage Power
ACE-3600 RNC-Site Gateway Manual RAD Data Communications
ACE-716 RUGGED AC/DC INPUT 150W POWER SUPPLY ETC
ACE1001 Arithmetic Controller Engine Fairchild Semiconductor
ACE1101 Arithmetic Controller Engine (ACEx) for Low Power Applications Fairchild Semiconductor

Other Datasheets by ACE Technology

Part Number Description
ACE4010M N-Channel MOSFET
ACE4054 Fully integrated constant current/constant voltage Li-ion battery charger
ACE4101 Li-ion Switching Charger IC
ACE431S Adjustable Precision Shunt Regulator
ACE432 Precision adjustable shunt voltage reference

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACE4722 5A, Multi-Chemistry Battery Charger IC With Photovoltaic Cell MPPT Function Description The ACE4722(Note 1) is a PWM switch-mode battery charger controller that can be powered by photovoltaic cell with maximum power point tracking function. The ACE4722 is specially designed for charging 1 or multi-cell lithium ion batteries or LiFePO4 batteries with constant current and constant voltage mode. In constant voltage mode, the regulation voltage is set by the external resistor divider. The constant charging current is programmable with a single current sense resistor. Deeply discharged batteries are automatically trickle charged at 15% of the programmed constant charging current until the cell voltage exceeds 66.7% of the regulation voltage.
Published: |