MC95FB204 Datasheet | ABOV

description . VERSION 1.5 (May 18, 2012) The description for “ Reference Voltage Out(1.80V VDC)” is added at 11. CC/CV block. The errata for each function are fixed at the 11. CC/CV block, 12. Clock Generator and 18.RESET paragraphs. pany logo is added at the rear end of header. VERSION 1.4 (May 15, 2012) The maximum values for IDD2/IDD4/IDD5 specification are changed to 2m A/1.5m A/1.5m A. POR level is corrected to 1.8V0.1V at 7.5 Power-On Reset Characteristics. TBD values are corrected to 10ms/20u A/1u A at 7.7 Internal WDTRC Oscillator Characteristics. VERSION 1.3 (December 02, 2011) “Instructions on how to use the input port” is added at the Appendix D. VERSION 1.2 (December 24, 2010) MC95FB104(16pin PKG) is eliminated. Fixed some errata in 12.5 12-Bit A/D Converter on page 83 and 87. VERSION 1.1 (July 7, 2010) Fixed some errata in 16.Memory Programming on page 106 and 17.Configure Option on page 120. VERSION 1.0 (July 2, 2010) 7.10 CC/CV Characteristics at page 29 are chagned. The paragraph “11.The CC/CV Block” at page 61 are changed. VERSION 0.3 Preliminary (March 19, 2010) Device name is changed to MC95FB204 from MC94FB204. The name of PSR0,1 are changed ALCPR0,1 and they(ALCPR0,1) are corrected to read/writeable register from write only. P22 pull-up register(P22PU=1) value is corrected to 1 at initial status because it is bined with RESET pin. 200m V CC regulation voltage is eliminated at CC/CV block and the voltage of Ictrl pin is assigned to CC reference voltage. Also Ictrl pin is assigned to AN12. 2 July 17, 2012 Ver.1.7 VERSION 0.2 Preliminary (September 22, 2009) Voltage input hign/low characteristics are changed. VERSION 0.1 Preliminary (September 8, 2009) Version 1.7 Published by FAE Team 2009 ABOV Semiconductor Co.,Ltd. All rights reserved. Additional information of this manual may be served by ABOV Semiconductor offices in Korea or Distributors. ABOV Semiconductor reserves the right to make changes to any information here in at any time...