Datasheet4U Logo Datasheet4U.com

S-77101 - POWER SEQUENCER

Download the S-77101 datasheet PDF. This datasheet also covers the S-77100 variant, as both devices belong to the same power sequencer family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • Easy support for sequencing of multiple power supplies.
  • Delay time can be set by the external capacitor.
  • Sequence operations of 4 channels can be controlled by 1 in.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (S-77100-ABLIC.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number S-77101
Manufacturer ABLIC
File Size 1.14 MB
Description POWER SEQUENCER
Datasheet download datasheet S-77101 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S-7038AF PAGING DECODER IC (POCSAG) Seiko Instruments Inc
S-7040D PAGING DECODER IC (POCSAG) Seiko Instruments Inc
S-7041B PAGING DECODER Seiko Instruments Inc
S-70L41B PAGING DECODER Seiko Instruments Inc
S-7235 Pulse / DTMF Switchable Dialer Seiko Instruments

Other Datasheets by ABLIC

Part Number Description
S-77100 POWER SEQUENCER
S-7760A PROGRAMMABLE PORT CONTROLLER
S-75V00ANC MINI LOGIC SERIES 2 INPUT NAND GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S-77100/77101 Series www.ablicinc.com © ABLIC Inc., 2015 POWER SEQUENCER Rev.1.0_02 The S-77100/77101 Series is a power sequencer. The S-77100 Series can output enable signals of 4 channels, and controls the external power supply circuit. The S-77100 Series turns on and off the enable signals successively by changing "H" and "L" of the ON pin. The S-77101 Series can output enable signals of 3 channels, and controls the external power supply circuit. The S-77101 Series turns on the enable__s__i_g_n_ als successively by changing the ON pin from "L" to "H", and turns off the enable signals successively by changing OFF pin from "H" to "L". The delay time for each enable signal can be set by the external capacitor.