S-24CM01C - 2-WIRE SERIAL E2PROM

ABLIC

Key Features

Operating voltage range Read: 1.6 V to 5.5 V Write: 1.7 V to 5.5 V.
Page write: 256 bytes / page.
Sequential read.
Operation frequency:.
Write time: 1.0 MHz (VCC = 2.5 V to 5.5 V) 400 kHz (VCC = 1.6 V to 2.5 V) 5.0 ms max.
Noise suppression: Schmitt trigger and noise filter on input pins (SCL, SDA).
Write protect function during the low power supply voltage.
Endurance: 106cycles / unit.
1 (Ta = 25°C).
Data retention: 100 years (T.

S-24CM01C 2-wire serial e2prom by ABLIC - Datasheet Preview

Datasheet Details

Part number	S-24CM01C
Manufacturer	ABLIC
File Size	436.75 KB
Description	2-WIRE SERIAL E2PROM
Datasheet	S-24CM01C Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
S-24CM01C	2-WIRE SERIAL E2PROM	Seiko
S-24C01A	CMOS 2-WIRE SERIAL EEPROM	Seiko
S-24C01B	2-WIRE CMOS SERIAL E2PROM	Seiko
S-24C01C	2-WIRE SERIAL E2PROM	Seiko
S-24C02A	CMOS 2-WIRE SERIAL EEPROM	Seiko

Other Datasheets by ABLIC

Part Number	Description
S-24C02D	2-WIRE SERIAL E2PROM
S-24C04D	2-WIRE SERIAL E2PROM
S-24C08C	2-WIRE SERIAL E2PROM
S-24C08CxxH	2-WIRE SERIAL E2PROM
S-24C08D	2-WIRE SERIAL E2PROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

S-24CM01C www.ablicinc.com © ABLIC Inc., 2010-2013 2-WIRE SERIAL E2PROM Rev.2.0_03_S The S-24CM01C is a 2-wire, low current consumption and wide range operation serial E2PROM. The S-24CM01C has the capacity of 1 M-bit, and the organization is 131072 words  8-bit. Page write and sequential read are available.  Features  Operating voltage range Read: 1.6 V to 5.5 V Write: 1.7 V to 5.5 V  Page write: 256 bytes / page  Sequential read  Operation frequency:  Write time: 1.0 MHz (VCC = 2.5 V to 5.5 V) 400 kHz (VCC = 1.6 V to 2.5 V) 5.0 ms max.