S-19509 - BUILT-IN WATCHDOG TIMER VOLTAGE REGULATOR

ABLIC

Features

Regulator block.
Output voltage:.
Input voltage:.
Output voltage accuracy:.
Dropout voltage:.
Output current:.
Input and output capacitors:.
Built-in overcurrent protection circuit:.
Built-in thermal shutdown circuit:.
Built-in ON / OFF circuit: 3.3 V, 5.0 V 3.0 V to 36.0 V ±2.0% (Tj =.
40°C to +150°C) 100 mV typ. (5.0 V output product, IOUT = 100 mA) Possible to output 500 mA (VIN = VOUT(S) + 1.0 V).
1.

S-19509 built-in watchdog timer voltage regulator by ABLIC - Datasheet Preview

Datasheet Details

Part number	S-19509
Manufacturer	ABLIC
File Size	860.19 KB
Description	BUILT-IN WATCHDOG TIMER VOLTAGE REGULATOR
Datasheet	S-19509 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
S-19104	OPERATION BUILT-IN DELAY CIRCUIT VOLTAGE DETECTOR	Seiko
S-19106	OPERATION BUILT-IN DELAY CIRCUIT VOLTAGE DETECTOR	Seiko
S-19190	VOLTAGE MONITORING IC	Seiko
S-19212	CMOS VOLTAGE REGULATOR	Seiko
S-19212B	CMOS VOLTAGE REGULATOR	Seiko

Other Datasheets by ABLIC

Part Number	Description
S-19500	WATCHDOG TIMER
S-19501	WATCHDOG TIMER
S-19502	WATCHDOG TIMER
S-19503	WATCHDOG TIMER
S-19506	VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

S-19509 Series www.ablic.com © ABLIC Inc., 2020-2021 AUTOMOTIVE, 125°C OPERATION, 36 V INPUT, 500 mA, BUILT-IN WATCHDOG TIMER VOLTAGE REGULATOR WITH RESET FUNCTION Rev.2.0_00 The S-19509 Series, developed by using high-withstand voltage CMOS technology, is a low dropout positive voltage regulator with the watchdog timer and the reset function, which has high-withstand voltage. The monitoring time of watchdog timer can be adjusted by an external capacitor. Moreover, a voltage detection circuit which monitors the output voltage is also prepared. ABLIC Inc. offers a "thermal simulation service" which supports the thermal design in conditions when our power management ICs are in use by customers.