TP2011 Datasheet | 3PEAK

3PEAK TP2011/TP2012/TP2014 Ultra-Low Power 200nA, 1.6V, RRIO, Push-Pull Output parators Features - Ultra-Low Supply Current: 200 nA per channel - Fast Response Time: 13 μs Propagation Delay, with 100 mV Overdrive - Internal Hysteresis for Clean Switching - Offset Voltage: ± 12.0 mV Maximum - Input Bias Current: 6 pA Typical - No Phase Reversal for Overdriven Inputs - Low Supply Voltage: 1.6V to 6V Applications - Battery Monitoring / Management - Alarm and Monitoring Circuits - Peak and Zero-crossing Detectors - Threshold Detectors/Discriminators - Sensing at Ground or Supply Line - Logic Level Shifting or Translation - Window parators - Oscillators and RC Timers - Mobile munications and Notebooks - Ultra-Low-Power Systems Descriptions The TP201x family of push-pull output parators Features the world-class lowest nano-power (250nA maximum) and fast 13μs response time capability, allowing operation from 1.6V to 6V. Input monmode range to supply rails makes the TP201x an ideal choice for power-sensitive, low-voltage (2-cell) applications. The TP201x push-pull output supports rail-to-rail output swing and interfaces with TTL /CMOS logic, and are capable of driving heavy DC or capacitive loads. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The output limits supply current surges and dynamic power consumption while switching. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK Incorporated. All other trademarks are the property of their respective owners. VDD R1 Vi R2 R3 TP201x Vo...