| Part Number | Description | Manufacture |
|---|---|---|
|
|
Transient Voltage Suppression Diodes & Benefits ■ 5000W peak pulse power ■ Typical IR less than 5μA when capability at 10/1000μs VBR min22V waveform, repetition rate (duty ■ High temperature to reflow cycles):0.01% soldering guaranteed: ■ SMD low profile surface 260°C/40sec m |
 Littelfuse |
|
|
SURFACE MOUNT TVS DIODE • Glass Passivated Chip Junction • Excellent clamping capability • Low inductance • Low profile package • Fast response time, typically less than 1ps from 0 volts to BV for unidirectional types • Typical IR less than 1 uA above 10V • Built-in strain |
 RFE |
|
|
Transient Voltage Suppressor Diode n RoHS compliant* and halogen free** n Surface mount SMC package n Standoff voltage: 5 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: DVBR = 0.1 % x VBR @ 25 °C x DT 5.0SMDJ Transient Voltage Suppressor Diod |
 BOURNS |
|
|
TVS Diodes • For surface mounted applications to optimize board space • Low profile package • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ES |
Littelfuse |
|
|
Surface Mount Transient Voltage Suppressors u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetiti |
 SOCAY |
|
|
Surface Mount Transient Voltage Suppressors u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetiti |
SOCAY |
|
|
Transient Voltage Suppressors |
 Brightking |
|
|
SURFACE MOUNT TVS DIODE • Glass Passivated Chip Junction • Excellent clamping capability • Low inductance • Low profile package • Fast response time, typically less than 1ps from 0 volts to BV for unidirectional types • Typical IR less than 1 uA above 10V • Built-in strain |
RFE |
|
|
TVS Diodes • 5000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Recognized to UL 497B as an Isolated Loop Circuit Protector • DO214AB SMT package for minimized board space • Low profile package • Typical failure mod |
Littelfuse |
|
|
Surface Mount Transient Voltage Suppressors Glass passivated chip 5000 W peak pulse power capability with a 10/1000 μs waveform, repeƟƟve rate (duty cycle):0.01 % High reliability applicaƟon and automoƟve grade AEC Q101 qualified Low leakage Uni and BidirecƟonal unit Excellent c |
 Semiware |
| Total 16 results |
