http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




MORNSUN Science & Technology
MORNSUN Science & Technology


T1100N

PASSIVE SIGNAL AMPLIFIER


No Preview Available !

T1100N pdf
PASSIVE SIGNAL AMPLIFIER Iin&Iout
T1100RN/RS/N/S
www.datasheet4u.com
DESCRIPTION
T1100 series, a standard analog amplifier,
with anterior circuit 4-20mA current signal input
and posterior 4-20mA current signal output ,is a
passive signal isolation module .the series
adopt magneto design and high efficiency loop
electric-larceny technology ,efficiently reducing
the reliance of current signal isolation on the
power ,realize 4-20mA standard signal isolation
with high accuracy and line regulation. Besides,
the modules have extremely low temperature
drift (no more than 35ppm/under -25°C to
+71 °C) .The isolation voltage between the input
and output can up to 3KVDC.
FEATURES
Two-port isolationBetween input and output
High accuracy (0.1% F.S.)
High linearity (0.1% F.S.)
Isolation voltage(3000VDC/60S)
Low voltage-drop(At 20mA<3V)
High frequency response(15KHz)
Extremely low temperature(35PPM/°C)
Industry standard(Operating Temperature
Range:-25°C to 71°C)
High reliability(MTBF500,000 hours)
PRODUCT PROGRAM
Part
Number
Power
Supply
Input
T1100RN
T1100RS
T1100N
T1100S
None
None
None
None
4-20mA
4-20mA
4-20mA
4-20mA
Output
4-20mA
4-20mA
4-20mA
4-20mA
Isolation
Power Output
Channels
None
None
None
None
1
1
1
1
Package
DIP16
SOIC16
DIP16
SOIC16
ELECTRICAL CHARACTERISTICS
Power Supply
None
Power Supply Data Power Dissipation None
Power Protection None
Input Signal
4 -20mA
Input Data
Input Impedance
Overload
Voltage Drop250mV(At input signal=20mA)
300mA
Voltage Drop
<3V(20mA)
Output Signal
4 -20mA
Output Data
Load
300ΩAt output Signal=20mA
Load Regulation 0.05% meas.val./100Ω
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
0.1%F.S.
Temperature Drift
0.0035%F.S./°C(-25°C to +71°C)
MODEL SELECTION
ISOLATION CHARACTERISTICS
Galvanic Isolation
Two-port isolationBetween input and output
Isolation Voltage
3KVDC (Tested for 1minute and 1mA max, humidity < 70%)
Insulation Resistance 1000MΩ,500VDCBetween input and output
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
OTHER CHARACTERISTICS
Ambient
tem perature
Operation temperature:-25 to +71°C
Transport and Storage temperature:-50 to +105°C
Package
DIP16/SOIC16
Weight
About 8g
Application
Environm ent
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T1100RN/RS/N/S
A/3-2008
Page 1 of 2



No Preview Available !

T1100N pdf
SCHEMATIC DIAGRAM
8- Iin-
Signal input
7+ Iin+
www.datasheet4u.com
Iout+
2+
Signal output
Iout-
1-
APPLICATION CIRCUIT DIAGRAM
OUTPUT
APPLICATION NOTE
1. Please read instruction book carefully before
using the product. If you have any question,
please contact with our technical support.
2. Please dont install in the dangerous zone.
3. Dont divide the product privately in case the
equipments ineffective or go wrong.
AFTER SERVICE
1. Products are carefully inspected and controlled
before going out from our factory. If they
operated abnormally or there were anything
wrong in the inner parts, please contact with our
agents near you or technical support in our
company as soon as possible.
2. 3 years warranty since the delivery date. During
the period of quality guaranteeour company
will repair or change free of charge if product
has any quality problem in the process of
normally using.
APPLICATION CIRCUITS
See A GUIDE TO INSTRUMENTATION
ISOLATION AMPLIFIERS for more detail.
PACKAGING SIZE AND TERMINAL DESCRIPTION
T1100RS /S SOIC16 Package
23 .80(0. 9 37)
First Angle Projection
T1100RN/N DIP16 Package
23 .80(0. 9 37)
0. 70(0. 028)
2.54
(0.100)
0. 50
0. 020
23.80(0.937)
7.50(0.295)
4.0
0.50
0.020
0. 30 1. 15±0.15
(0.012) 0.045±0. 006
0.70(0.028)
161 514
10 9
2.00
0.079
RECOMMENDED FOOTPRINT
Top view,grid:2.54*2.54mm(0.1*0.1inch)
d ia m ete r: 1. 0 0mm( 0. 03 9 in ch)
16 1514
10 9
123
78
1.00
0.039
Pin Connection
PIN FUNCTION
Output-
Output+
In put +
In put -
O the rs
NC
NC:No Connection
123
78
Note:
Un i t:m m(in ch )
Pin section:0.50*0.30mm(0.020*0.012inch)
Pin section tolerances:±0.10mm(±0.004inch)
General tolerances:±0.25mm(±0.010inch)
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T1100RN/RS/N/S
A/3-2008
Page 2 of 2



Part Number T1100N
Description PASSIVE SIGNAL AMPLIFIER
Maker MORNSUN Science & Technology - MORNSUN Science & Technology
Total Page 2 Pages
PDF Download
T1100N pdf
Download PDF File
T1100N pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
T1100L PASSIVE SIGNAL AMPLIFIER T1100L
MORNSUN Science & Technology
PDF
T1100N PASSIVE SIGNAL AMPLIFIER T1100N
MORNSUN Science & Technology
PDF
T1100RN PASSIVE SIGNAL AMPLIFIER T1100RN
MORNSUN Science & Technology
PDF
T1100RS PASSIVE SIGNAL AMPLIFIER T1100RS
MORNSUN Science & Technology
PDF
T1100S PASSIVE SIGNAL AMPLIFIER T1100S
MORNSUN Science & Technology
PDF
T110AB-LC Low Capacitance Bi-Directional Surface Mount Thyristor Surge Protective Device T110AB-LC
Weitron Technology
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components