http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Vishay Intertechnology Electronic Components Datasheet


S106D

High Precision Foil Resistor



No Preview Available !

S106D pdf
www.DataSheet.co.kr
S Series
Vishay Foil Resistors
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %
Any value at any tolerance available within resistance range
INTRODUCTION
Bulk Metal® Foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications. BMF
technology allows us to produce customer orientated
products, designed to satisfy challenging and specific
technical requirements.
Model S Series made from Vishay BMF offers low TCR,
excellent load life stability, tight tolerance, fast response
time, low current noise, low thermal EMF and low voltage
coefficient, all in one resistor.
FEATURES
Temperature coefficient of resistance (TCR):
- 55 °C to + 125 °C, 25 °C ref.
S102C series: ± 2 ppm/°C typical (see table 1)
Pb-free
Available
S102K series: ± 1 ppm/°C typical (see table 1) RoHS*
Rated power: to 1 W at + 125 °C
COMPLIANT
Tolerance: ± 0.005 %
Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated
power
Resistance range: 0.5 Ω to 1 MΩ (higher or lower values of
resistance are available)
Electrostatic discharge above 25 000 V
Non inductive, non capacitive design
Rise time: 1 ns without ringing
Current noise: < - 40 dB
Thermal EMF: 0.05 µV/°C typical
Voltage coefficient: < 0.1 ppm/V
Low inductance: < 0.08 µH typical
Non hot spot design
Terminal finishes available: lead (Pb)-free
tin/lead alloy
Matched sets are available per request
(TCR Tracking: to 0.5 ppm/°C)
For better TCR and PCR performances please review the
Z201 datasheet
The S Series is virtually insensitive to destabillizing factors.
The resistor element is a solid alloy that displays the
desirable bulk properties of its parent material, thus it is
inherently stable and noise free.
Vishay’s Bulk Metal® S Series resistors are the modern
generation of precision resistors. The standard design of
these resistors provides a unique combination of
characteristics found in no other single resistor.
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
TABLE 1 - RESISTANCE VERSUS TCR
(- 55 °C to + 125 °C, + 25 °C Ref.)
RESISTOR
RESISTANCE
VALUE (Ω)
TYPICAL TCR AND
MAX SPREAD
(ppm/°C)
S102(C)
S102(K)
80 to < 150K
80 to < 100K
± 2 ± 2.5
± 1 ± 2.5
S102(C)
S102(K)
S102(C)
S102(K)
50 to < 80
1 to < 50
± 2 ± 3.5
± 1 ± 3.5
± 2 ± 4.5
± 1 ± 4.5
APPLICATIONS
High precision amplifiers
Down-hole (high temperature)
High precision instrumentation
Medical and test equipment
Industrial
Audio (high end stereo equipment)
EB applications (electron beam scanning and recording
equipment, electron microscopes)
Military, airborne
Measurement instrumentation
FIGURE 1 - FOIL RESISTOR TCR COMPARISON OF
FOIL ALLOYS IN MILITARY RANGE
+ 150
+ 100
+ 50
ΔR
R0
(ppm)
- 50
1 ppm/°C
- 100
- 150
2 ppm/°C
- 200
- 50
- 55
- 25
C Alloy
2 ppm/°C
0 + 25 + 50 + 75 + 100 + 125
K Alloy
1 ppm/°C
Temperature (°C)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63001
Revision: 20-Nov-07
For any questions, contact: foil@vishay.com
www.vishay.com
1
Datasheet pdf - http://www.DataSheet4U.net/



No Preview Available !

S106D pdf
www.DataSheet.co.kr
S Series
Vishay Foil Resistors High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
L
Optional Customer Part Number
W Print specification, etc. if required
Date Code
VISHAY 01 10
H XXXX Year Week
S102C
XXXXXX
100R01
0.01 %
Resistance
Value Code
Tolerance
ST1)
Model Number
LS
SW
Lead Material #22 AWG
Round Solder Coated Copper
LL
Note
1. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the unit
after all soldering processes.
TABLE 2 - MODEL SELECTION
MODEL
NUMBER
RESISTANCE MAXIMUM
RANGE WORKING
(Ω) VOLTAGE
AMBIENT
POWER RATING AVERAGE
WEIGHT
at at IN GRAMS
+ 70 °C + 125 °C
DIMENSIONS
INCHES
mm
F1)
(INCHES)
TIGHTEST
TOLERANCE
VS. LOWEST
RESISTANCE
VALUE
S102C
(S102J)2)
1 to 150K
S102K
(S102L)2)
1 to 100K
0.6 W 0.3 W
W: 0.105 ± 0.010 2.67 ± 0.25
up to 100K
L: 0.300 ± 0.010 7.62 ± 0.25
300
0.4 W 0.2 W
0.6
H: 0.326 ± 0.010 8.28 ± 0.25
ST: 0.010 min. 0.254 min.
SW: 0.035 ± 0.010 1.02 ± 0.13
over 100K
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.150 ± 0.0054 3.81 ± 0.13
S104D
(S104F)1)
1 to 500K
S104K
1 to 300K
S105D
(S105F)1)
1 to 750K
S105K
1 to 500K
1.0 W 0.5 W
W: 0.160 max.
4.06 max.
up to 200K
L: 0.575 max. 14.61 max.
350
0.6 W 0.3 W
H: 0.413 max. 10.49 max. (0.138)
1.4
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
(0.565)
(0.413)
0.005 %/50 Ω
over 200K
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.400 ± 0.020 10.16 ± 0.51
0.01 %/25 Ω
0.02 %/12 Ω
0.05 %/5 Ω
1.5 W 0.75 W
up to 300K
0.8 W 0.4 W
W: 0.160 max.
L: 0.820 max.
H: 0.413 max.
4.06 max.
20.83 max.
10.49 max.
(0.138)
(0.890)
(0.413)
0.1 %/2 Ω
0.25 %/2 Ω
0.50 %/1 Ω
350
1.9 ST: 0.035 ± 0.005 0.889 ± 0.13
1.0 %/1 Ω
SW: 0.050 ± 0.005 1.27 ± 0.13
over 300K
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.650 ± 0.020 16.51 ± 0.51
(0.7 ±
0.02)
S106D
0.5 to 1M
2.0 W 1.0 W
W: 0.260 max.
6.60 max.
up to 400K
L: 1.200 max. 30.48 max.
500
1.0 W 0.5 W
H: 0.413 max. 10.49 max.
4.0 ST: 0.035 ± 0.005 0.889 ± 0.13
S106K
0.5 to 600K
over 400K
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.900 ± 0.020 22.86 ± 0.51
Notes
1. S104F and S105F have different package dimensions (see last column). All other specifications are the same.
2. 0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63001
Revision: 20-Nov-07
Datasheet pdf - http://www.DataSheet4U.net/



Part Number S106D
Description High Precision Foil Resistor
Maker Vishay Siliconix - Vishay Siliconix
Total Page 6 Pages
PDF Download
S106D pdf
Download PDF File
S106D pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
S10 THIN FILM SPST SWITCH S10
Tyco Electronics
PDF
S10 Diode S10
American Microsemiconductor
PDF
S10-12S5 DC/DC MODULES S10-12S5
Intronics Power
PDF
S100 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER S100
Pan Jit International.
PDF
S100-T1 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER S100-T1
Won-Top Electronics
PDF
S100-T3 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER S100-T3
Won-Top Electronics
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components