http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Littelfuse
Littelfuse


Q6012LTH1LED

Thyristors



No Preview Available !

Q6012LTH1LED pdf
Teccor® brand Thyristors
12 Amp Alternistor Quadrac for LED dimmer applications
Q6012LTH1LED Series
Agency Approval
Agency
®
Main Features
Symbol
IT(RMS)
VDRM / VRRM
DIAC VBO
Agency File Number
L Package : E71639
Value
12
600
33 to 43
Unit
A
V
V
Schematic Symbol
MT2
MT1
T
RoHS
Description
The Quadrac is an internally triggered Triac designed for
AC switching and phase control applications. It is a Triac
and DIAC in a single package, which saves user expense
by eliminating the need for separate Triac and DIAC
components.
Q6012LTH1LED series is designed to meet low load current
characteristics typical in LED lighting applications.
By keeping holding current at 8mA maximum, this Quadrac
series is characterized and specified to perform best with
LED loads. The Q6012LTH1LED series is best suited for
LED dimming controls to obtain the lowest levels of light
output with a minimum probability of flickering.
Q6012LTH1LED series is offered in the industry standard
TO-220AB package with an isolated mounting tab that
makes it best suited for adding an external heat sink.
Features
• As low as 8mA max
holding current
http://www.DataSheet4U.net/
• UL recognized TO-220AB
package
• 110°C rated junction
temperature
• di/dt performance of
70A /μs
• QUADRAC version
includes intergrated DIAC
Benefits
• Provides full control
of light out put at the
extreme low end of load
conditions.
b25et0w0eVeAnC
min isolation
mounting tab
and active terminals
• Improves margin of safe
operation with less heat
sinking required
• Enable survivability
of typically LED load
operating characteristics
• Simplicity of circuit design
& layout
Applications
Excellent for AC switching and phase control applications
such as lighting and motor speed controls. Typical
applications are AC solid-state switches, light dimmers
with LED loads, small low current motor in power tools,
and low current motors in home/brown goods appliances.
Internally constructed isolated package is offered for ease
of heat sinking with highest isolation voltage.
Q6012LTH1LED Series
1
Revised: January 25, 2013 08:34 AM
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
datasheet pdf - http://www.DataSheet4U.net/



No Preview Available !

Q6012LTH1LED pdf
Teccor® brand Thyristors
12 Amp Alternistor Quadrac for LED dimmer applications
Absolute Maximum Ratings
Symbol
IT(RMS)
RMS forward current
Parameter
ITSM Peak non-repetitive surge current
I2t I2t value for fusing
di/dt Critical rate-of-rise of on-state current
IGM Peak gate current
Tstg Storage temperature range
TJ Operating junction temperature range
Tc = 90°C
single half cycle; f = 50Hz;
TJ (initial) = 25°C
single half cycle; f = 60Hz;
TJ (initial) = 25°C
tp = 8.3ms
f = 60Hz; TJ =110°C
TJ = 110°C
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Alternistor Quadrac
Symbol
Test Conditions
IH
dv/dt
dv/dt(c)
tgt
IT = 20mA (initial)
VD = VDRM; gate open; TJ=110°C
di/dt(c) = 0.54 x IT(rms) / ms; TJ = 110°C
(note 1)
(1) Reference test circuit in figure 7 and waveform in figure 8; CT = 0.1μF with 0.1μs rise time.
MAX.
MIN.
MIN.
TYP.
Value
12
110
120
60
70
1.5
-40 to 150
-40 to 110
Unit
A
A
A2s
A/µs
A
°C
°C
Value
8
45
2
3
Unit
mA
V/μs
V/μs
μs
Trigger DIAC Specifications
http://www.DataSheet4U.net/
Symbol
ΔVBO
Test Conditions
Breakover Voltage Symmetry
VBO Breakover Voltage, forward and reverse
[ΔV±]
Dynamic Breakback Voltage, forward and reverse (note 1)
IBO Peak Breakover Current
CT Trigger Firing Capacitance
(1) Reference test circuit in figure 7 and waveform in figure 8.
MAX.
MIN.
MAX.
MIN.
MAX.
MAX.
Static Characteristics
Symbol
VTM
IDRM / IRRM
Test Conditions
IT = 1.41 x IT(rms) A; tp = 380μs
VDRM / VRRM
TJ = 25°C
TJ = 110°C
Value
3
33
43
5
25
0.1
MAX.
MAX.
Value
1.6
10
1000
Unit
V
V
V
uA
µF
Unit
V
µA
Thermal Resistances
Rθ(J-C)
Rθ(J-A)
Symbol
Q6012LTH1LED Series
Parameter
Junction to case (AC)
Junction to ambient
2
Revised: January 25, 2013 08:34 AM
Value
2.3
50
Unit
°C/W
°C/W
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
datasheet pdf - http://www.DataSheet4U.net/



Part Number Q6012LTH1LED
Description Thyristors
Maker Littelfuse - Littelfuse
Total Page 6 Pages
PDF Download
Q6012LTH1LED pdf
Download PDF File
Q6012LTH1LED pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
Q6012LTH1LED Thyristors Q6012LTH1LED
Littelfuse
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components