http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



  Microchip Technology Semiconductor Electronic Components Datasheet  


MCP19035

High-Speed Synchronous Buck Controller



No Preview Available !

MCP19035 pdf
MCP19035
High-Speed Synchronous Buck Controller
Features:
• Input Voltage Range: from 4.5V to 30V
• Targeted for Low-Voltage Power Trains with
Output Current up to 20A
• High-Speed Voltage Mode, Analog Pulse-Width
Modulation Control
• Power Good Output
• Internal Oscillator, Reference Voltage and
Overcurrent Limit Threshold for Stand-Alone
Applications.
• Multiple Switching Frequency Options (FSW):
- 300 kHz
- 600 kHz
• Integrated Synchronous MOSFET Drivers
• Multiple Dead-Time Options
• Internal Blocking Device for Bootstrap Circuit
• Integrated Current Sense Capability for Short
Circuit Protection
• Internal Overtemperature Protection
• Under Voltage Lockout (UVLO)
• Integrated Linear Voltage Regulator
• 10-LD 3 X 3 mm DFN Package
Applications:
• Point of Loads
• Set-Top Boxes
• DSL Cable Modems
• FPGA’s/DSP’s Power Supply
• PC’s Graphic/Audio Cards
General Description
The MCP19035 is an application-optimized, high-
speed synchronous buck controller that operates from
input voltage sources up to 30V. This controller
implements a voltage-mode control architecture with a
fixed switching frequency of 300 kHz or 600 kHz. The
high-switching frequency facilitates the use of smaller
passive components, including the inductor and
input/output capacitors, allowing a compact, high-
performance power supply solution. The MCP19035
implements an adaptive anti-cross conduction scheme
to prevent shoot-through in the external power
MOSFETs. Furthermore, the MCP19035 offers multiple
dead-time options, enabling an additional degree of
optimization, allowing a higher efficiency power supply
design.
The MCP19035 controller is intended to be used for
applications providing up to 20A of output currents
across a wide input voltage range, up to 30V.
The SHDN input is used to turn the device on and off.
While turned off, the current consumption is minimized.
The MCP19035 offers a Power Good feature
(PWRGD), enabling fault detection and simplifying
sequencing.
Package Types
MCP19035
3x3 DFN*
SHDN 1
FB 2
COMP 3
VIN 4
PWRGD 5
10 HDRV
9 PHASE
EP
11 8 BOOT
7 LDRV
6 +VCC
* Includes Exposed Thermal Pad (EP); see Table 3-1.
2012-2013 Microchip Technology Inc.
DS22326B-page 1



No Preview Available !

MCP19035 pdf
MCP19035
Typical Application
+ VIN
ON
OFF
MCP19035
SHDN
BOOT
VIN
PWRGD
HDRV
PHASE
COMP
LDRV
C2
C3
R4
FB +VCC
GND
Q1
CBOOT
Q2
CVCC
R1
C1 R3
R2
CIN
L
+VOUT
COUT
DS22326B-page 2
2012-2013 Microchip Technology Inc.



Part Number MCP19035
Description High-Speed Synchronous Buck Controller
Maker Microchip - Microchip
Total Page 30 Pages
PDF Download
MCP19035 pdf
Download PDF File
MCP19035 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
MCP19035 High-Speed Synchronous Buck Controller MCP19035
Microchip
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components