http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



  Microchip Technology Semiconductor Electronic Components Datasheet  


MCP14A0052

0.5A MOSFET Driver



No Preview Available !

MCP14A0052 pdf
MCP14A0051/2
0.5A MOSFET Driver
With Low Threshold Input And Enable
Features
• High Peak Output Current: 0.5A (typical)
• Wide Input Supply Voltage Operating Range:
- 4.5V to 18V
• Low Shoot-Through/Cross-Conduction Current in
Output Stage
• High Capacitive Load Drive Capability:
- 1000 pF in 40 ns (typical)
• Short Delay Times: 33 ns (tD1), 24 ns (tD2) (typical)
• Low Supply Current: 375 µA (typical)
• Low Voltage Threshold Input and Enable with
Hysteresis
• Latch-Up Protected: Withstands 500 mA Reverse
Current
• Space-Saving Packages:
- 6L SOT-23
- 6L 2 x 2 DFN
Applications
• Switch Mode Power Supplies
• Pulse Transformer Drive
• Line Drivers
• Level Translator
• Motor and Solenoid Drive
Package Types
6-Lead SOT-23
VDD 1
AGND 2
IN 3
MCP14A0051
MCP14A0052
6 OUT
OUT
5 GND
4 EN
* Includes Exposed Thermal Pad (EP); see Table 3-1.
General Description
The MCP14A0051/2 devices are high-speed MOSFET
drivers that are capable of providing up to 0.5A of peak
current while operating from a single 4.5V to 18V
supply. The inverting (MCP14A0051) or non-inverting
(MCP14A0052) single-channel output is directly
controlled from either TTL or CMOS (2V to 18V) logic.
These devices also feature low shoot-through current,
matched rise and fall times, and short propagation
delays which make them ideal for high switching
frequency applications.
The MCP14A0051/2 family of devices offer enhanced
control with Enable functionality. The active-high
Enable pin can be driven low to drive the output of the
MCP14A0051/2 low regardless of the status of the
Input pin. An integrated pull-up resistor allows the user
to leave the Enable pin floating for standard operation.
Additionally, the MCP14A0051/2 devices feature sepa-
rate ground pins (AGND and GND), allowing greater
noise isolation between the level-sensitive Input/
Enable pins and the fast, high-current transitions of the
push-pull output stage.
These devices are highly latch-up resistant under any
condition within their power and voltage ratings. They
can accept up to 500 mA of reverse current being
forced back into their outputs without damage or logic
upset. All terminals are fully protected against
electrostatic discharge (ESD) up to 1.75 kV (HBM) and
100V (MM).
MCP14A0052 MCP14A0051
OUT
OUT 1
GND 2
EN 3
EP
7
2x2 DFN-6*
6 VDD
5 IN
4 AGND
2014 Microchip Technology Inc.
DS20005369A-page 1



No Preview Available !

MCP14A0052 pdf
MCP14A0051/2
Functional Block Diagram
Internal
Pull-Up
Enable
VREF
AG ND
MCP14A0051 Inverting
MCP14A0052 Non-Inverting
Inverting
Input
VDD
VREF
Non-Inverting
AG ND
VDD
Output
GND
DS20005369A-page 2
2014 Microchip Technology Inc.



Part Number MCP14A0052
Description 0.5A MOSFET Driver
Maker Microchip - Microchip
Total Page 24 Pages
PDF Download
MCP14A0052 pdf
Download PDF File
MCP14A0052 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
MCP14A0051 0.5A MOSFET Driver MCP14A0051
Microchip
PDF
MCP14A0052 0.5A MOSFET Driver MCP14A0052
Microchip
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components