19-6148; Rev 0; 12/11
EVALUATION KIT AVAILABLE
1Msps, Low-Power, Serial 12-/10-/8-Bit,
Benefits and Features
The MAX11120–MAX11128 are 12-/10-/8-bit with exter-
nal reference and industry-leading 1.5MHz, full linear
bandwidth, high speed, low-power, serial output suc-
cessive-approximation register (SAR) analog-to-digital
converters (ADCs). The MAX11120–MAX11128 include
both internal and external clock modes. These devices
feature scan mode in both internal and external clock
modes. The internal clock mode features internal averag-
ing to increase SNR. The external clock mode features
the SampleSetK technology, a user-programmable ana-
log input channel sequencer. The SampleSet approach
provides greater sequencing flexibility for multichannel
applications while alleviating significant microcontroller
or DSP (controlling unit) communication overhead.
The internal clock mode features an integrated FIFO
allowing data to be sampled at high speeds and then held
for readout at any time or at a lower clock rate. Internal
averaging is also supported in this mode improving SNR
for noisy input signals. The devices feature analog input
channels that can be configured to be single-ended
inputs, fully differential pairs, or pseudo-differential inputs
with respect to one common input. The MAX11120–
MAX11128 operate from a 2.35V to 3.6V supply and con-
sume only 5.4mW at 1Msps.
The MAX11120–MAX11128 include AutoShutdownK,
fast wake-up, and a high-speed 3-wire serial interface.
The devices feature full power-down mode for optimal
The 16MHz, 3-wire serial interface directly connects to
SPI, QSPIK, and MICROWIREK devices without external
Excellent dynamic performance, low voltage, low power,
ease of use, and small package size make these convert-
ers ideal for portable battery-powered data-acquisition
applications, and for other applications that demand low
power consumption and small space.
The MAX11120–MAX11128 are available in 28-pin, 5mm
x 5mm, TQFN packages and operate over the -40NC to
+125NC temperature range.
SampleSet and AutoShutdown are trademarks of Maxim
Integrated Products, Inc.
QSPI is a trademark of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor
Ordering Information appears at end of data sheet.
S Scan Modes, Internal Averaging, and Internal
S 16-Entry First-In/First-Out (FIFO)
S SampleSet: User-Defined Channel Sequence with
Maximum Length of 256
S Analog Multiplexer with True Differential
8-/4-/2-Channel Fully-Differential Pairs
15-/8-/4-Channel Pseudo-Differential Relative to
a Common Input
S Two Software-Selectable Bipolar Input Ranges
S Flexible Input Configuration Across All Channels
S High Accuracy
Q1 LSB INL, Q1 LSB DNL, No Missing Codes
Over Temperature Range
S 70dB SINAD Guaranteed at 250kHz Input
S 1.5V to 3.6V Wide Range I/O Supply
Allows the Serial Interface to Connect Directly
to 1.8V, 2.5V, or 3.3V Digital Systems
S 2.35V to 3.6V Supply Voltage
S Longer Battery Life for Portable Applications
5.4mW at 1Msps with 3V Supplies
2µA Full-Shutdown Current
S External Differential Reference (1V to VDD)
S 16MHz, 3-Wire SPI-/QSPI-/MICROWIRE-/DSP-
Compatible Serial Interface
S Wide -40NC to +125NC Operation
S Space-Saving, 28-Pin, 5mm x 5mm TQFN
S 1Msps Conversion Rate, No Pipeline Delay
S 12-/10-/8-Bit Resolution
High-Speed Data Acquisition Systems
High-Speed Closed-Loop Systems
Industrial Control Systems
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAX11120.related.
����������������������������������������������������������������� Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Datasheet pdf - http://www.DataSheet4U.net/