http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Maxim Integrated Semiconductor Electronic Components Datasheet


MAX1076

(MAX1076 / MAX1078) 10-Bit ADCs



No Preview Available !

MAX1076 pdf
19-3291; Rev 1; 4/09
www.DataSheet4U.com
1.8Msps, Single-Supply, Low-Power, True-
Differential, 10-Bit ADCs with Internal Reference
General Description
The MAX1076/MAX1078 are low-power, high-speed, seri-
al-output, 10-bit, analog-to-digital converters (ADCs) that
operate at up to 1.8Msps and have an internal reference.
These devices feature true-differential inputs, offering bet-
ter noise immunity, distortion improvements, and a wider
dynamic range over single-ended inputs. A standard
SPI™/QSPI™/MICROWIRE™ interface provides the clock
necessary for conversion. These devices easily interface
with standard digital signal processor (DSP) synchronous
serial interfaces.
The MAX1076/MAX1078 operate from a single +4.75V to
+5.25V supply voltage. The MAX1076/MAX1078 include
a 4.096V internal reference. The MAX1076 has a unipolar
analog input, while the MAX1078 has a bipolar analog
input. These devices feature a partial power-down mode
and a full power-down mode for use between conver-
sions, which lower the supply current to 2mA (typ) and
1µA (max), respectively. Also featured is a separate
power-supply input (VL), which allows direct interfacing to
+1.8V to VDD digital logic. The fast conversion speed,
low-power dissipation, excellent AC performance, and DC
accuracy (±0.5 LSB INL) make the MAX1076/MAX1078
ideal for industrial process control, motor control, and
base-station applications.
The MAX1076/MAX1078 come in a 12-pin TQFN pack-
age, and are available in the extended (-40°C to +85°C)
temperature range.
Data Acquisition
Bill Validation
Motor Control
Applications
Communications
Portable Instruments
Features
o 1.8Msps Sampling Rate
o Only 50mW (typ) Power Dissipation
o Only 1µA (max) Shutdown Current
o High-Speed, SPI-Compatible, 3-Wire Serial Interface
o 61dB S/(N + D) at 525kHz Input Frequency
o Internal True-Differential Track/Hold (T/H)
o Internal 4.096V Reference
o No Pipeline Delays
o Small 12-Pin TQFN Package
Ordering Information
PART
TEMP RANGE PIN-
PACKAGE
INPUT
MAX1076ETC+T -40°C to +85°C 12 TQFN
Unipolar
MAX1078ETC+T -40°C to +85°C 12 TQFN
Bipolar
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Pin Configuration
Typical Operating Circuit
TOP VIEW
AIN+ N.C. SCLK
12 11 10
AIN- 1
REF 2
RGND 3
MAX1076
MAX1078
9 CNVST
8 DOUT
7 VL
456
VDD N.C. GND
TQFN
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
+4.75V TO +5.25V
+1.8V TO VDD
10μF
DIFFERENTIAL +
INPUT
VOLTAGE -
4.7μF 0.01μF
0.01μF
VDD
0.01μF
VL
AIN+ DOUT
AIN-
MAX1076
MAX1078 CNVST
SCLK
REF
RGND
GND
10μF
μC/DSP
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.



No Preview Available !

MAX1076 pdf
www.DataSheet4U.com
1.8Msps, Single-Supply, Low-Power, True-
Differential, 10-Bit ADCs with Internal Reference
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Inputs
to GND .................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Output
to GND ....................-0.3V to the lower of (VL + 0.3V) and +6V
Analog Inputs and
REF to GND..........-0.3V to the lower of (VDD + 0.3V) and +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Range
MAX107_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = VDD, fSCLK = 28.8MHz, 50% duty cycle, TA = -40°C to +85°C, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
DC ACCURACY
Resolution
Relative Accuracy
Differential Nonlinearity
Offset Error
SYMBOL
CONDITIONS
INL
DNL
(Note 1)
(Note 2)
MIN TYP MAX UNITS
10 Bits
±0.5 LSB
±0.5 LSB
±2 LSB
Offset-Error Temperature
Coefficient
±1 ppm/°C
Gain Error
Offset nulled
Gain Temperature Coefficient
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD
60
Total Harmonic Distortion
THD Up to the 5th harmonic
Spurious-Free Dynamic Range
SFDR
Intermodulation Distortion
IMD fIN1 = 250kHz, fIN2 = 300kHz
Full-Power Bandwidth
-3dB point, small-signal method
Full-Linear Bandwidth
S/(N + D) > 56dB, single ended
CONVERSION RATE
Minimum Conversion Time
tCONV (Note 3)
Maximum Throughput Rate
1.8
Minimum Throughput Rate
(Note 4)
10
Track-and-Hold Acquisition Time
Aperture Delay
tACQ (Note 5)
Aperture Jitter
(Note 6)
External Clock Frequency
fSCLK
±2 LSB
±2 ppm/°C
61 dB
-80 -74
dB
-80 -74
dB
-78 dB
20 MHz
2 MHz
0.556
µs
Msps
ksps
104 ns
5 ns
30 ps
28.8 MHz
2 _______________________________________________________________________________________



Part Number MAX1076
Description (MAX1076 / MAX1078) 10-Bit ADCs
Maker Maxim Integrated Products - Maxim Integrated Products
Total Page 18 Pages
PDF Download
MAX1076 pdf
Download PDF File
MAX1076 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
MAX100 250Msps / 8-Bit ADC with Track/Hold MAX100
Maxim
PDF
MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC MAX1002
Maxim
PDF
MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC MAX1003
Maxim
PDF
MAX1005 IF Undersampler MAX1005
Maxim
PDF
MAX1007 Mobile-Radio Analog Controller MAX1007
Maxim
PDF
MAX101 500Msps / 8-Bit ADC with Track/Hold MAX101
Maxim
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components