http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Maxim Integrated Semiconductor Electronic Components Datasheet


MAX1075

(MAX1072 / MAX1075) 10-Bit ADCs



No Preview Available !

MAX1075 pdf
19-3153; Rev 0; 1/04
www.DataSheet4U.com
1.8Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
General Description
The MAX1072/MAX1075 low-power, high-speed, serial-
output, 10-bit, analog-to-digital converters (ADCs) oper-
ate at up to 1.8Msps. These devices feature true-differen-
tial inputs, offering better noise immunity, distortion
improvements, and a wider dynamic range over single-
ended inputs. A standard SPI™/QSPI™/MICROWIRE™
interface provides the clock necessary for conversion.
These devices easily interface with standard digital signal
processor (DSP) synchronous serial interfaces.
The MAX1072/MAX1075 operate from a single +4.75V to
+5.25V supply voltage and require an external reference.
The MAX1072 has a unipolar analog input, while the
MAX1075 has a bipolar analog input. These devices fea-
ture a partial power-down mode and a full power-down
mode for use between conversions, which lower the sup-
ply current to 1mA (typ) and 1µA (max), respectively. Also
featured is a separate power-supply input (VL), which
allows direct interfacing to +1.8V to VDD digital logic. The
fast conversion speed, low-power dissipation, excellent
AC performance, and DC accuracy (±0.5 LSB INL) make
the MAX1072/MAX1075 ideal for industrial process con-
trol, motor control, and base-station applications.
The MAX1072/MAX1075 come in a 12-pin TQFN pack-
age, and are available in the commercial (0°C to +70°C)
and extended (-40°C to +85°C) temperature ranges.
Applications
Data Acquisition
Bill Validation
Motor Control
Communications
Portable Instruments
Pin Configuration
Features
o 1.8Msps Sampling Rate
o Only 45mW (typ) Power Dissipation
o Only 1µA (max) Shutdown Current
o High-Speed, SPI-Compatible, 3-Wire Serial Interface
o 61dB S/(N + D) at 525kHz Input Frequency
o Internal True-Differential Track/Hold (T/H)
o External Reference
o No Pipeline Delays
o Small 12-Pin TQFN Package
PART
MAX1072CTC-T
MAX1072ETC-T
MAX1075CTC-T
MAX1075ETC-T
Ordering Information
TEMP RANGE
PIN-
PACKAGE
0°C to +70°C 12 TQFN-12
-40°C to +85°C
0°C to +70°C
-40°C to +85°C
12 TQFN-12
12 TQFN-12
12 TQFN-12
INPUT
Unipolar
Unipolar
Bipolar
Bipolar
Typical Operating Circuit
TOP VIEW
AIN+ N.C. SCLK
12 11 10
AIN- 1
REF 2
RGND 3
MAX1072
MAX1075
9 CNVST
8 DOUT
7 VL
456
VDD N.C. GND
TQFN
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
+4.75V TO +5.25V
+1.8V TO VDD
10µF
DIFFERENTIAL +
INPUT
VOLTAGE -
REF
4.7µF
0.01µF
0.01µF
VDD
0.01µF
VL
AIN+ DOUT
AIN-
MAX1072
MAX1075 CNVST
SCLK
REF
RGND
GND
10µF
µC/DSP
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.



No Preview Available !

MAX1075 pdf
www.DataSheet4U.com
1.8Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ...................-0.3V to the lower of (VDD + 0.3V) or +6V
Digital Inputs
to GND ....................-0.3V to the lower of (VDD + 0.3V) or +6V
Digital Output
to GND .......................-0.3V to the lower of (VL + 0.3V) or +6V
Analog Inputs and
REF to GND.............-0.3V to the lower of (VDD + 0.3V) or +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Ranges
MAX107_ CTC ...................................................0°C to +70°C
MAX107_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = VDD, VREF = 4.096V, fSCLK = 28.8MHz, 50% duty cycle, TA = TMIN to TMAX, unless otherwise noted. Typical
values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
DC ACCURACY
Resolution
Relative Accuracy
INL (Note 1)
10 Bits
±0.5 LSB
Differential Nonlinearity
Offset Error
DNL (Note 2)
±0.5
±2
LSB
LSB
Offset-Error Temperature
Coefficient
±1 ppm/°C
Gain Error
Gain Temperature Coefficient
Offset nulled
±2 LSB
±2 ppm/°C
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD
Total Harmonic Distortion
THD
60
61
-80 -74
dB
dB
Spurious-Free Dynamic Range
Intermodulation Distortion
Full-Power Bandwidth
Full-Linear Bandwidth
CONVERSION RATE
Minimum Conversion Time
Maximum Throughput Rate
Minimum Throughput Rate
SFDR
IMD
fIN1 = 250kHz, fIN2 = 300kHz
-3dB point, small-signal method
S/(N + D) Σ 56dB, single ended
tCONV (Note 3)
(Note 4)
-80 -74
dB
-78 dB
20 MHz
2 MHz
0.556
µs
1.8 Msps
10 ksps
Track-and-Hold Acquisition Time
Aperture Delay
tACQ (Note 5)
104 ns
5 ns
Aperture Jitter
External Clock Frequency
fSCLK
(Note 6)
30 ps
28.8 MHz
2 _______________________________________________________________________________________



Part Number MAX1075
Description (MAX1072 / MAX1075) 10-Bit ADCs
Maker Maxim Integrated Products - Maxim Integrated Products
Total Page 18 Pages
PDF Download
MAX1075 pdf
Download PDF File
MAX1075 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
MAX100 250Msps / 8-Bit ADC with Track/Hold MAX100
Maxim
PDF
MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC MAX1002
Maxim
PDF
MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC MAX1003
Maxim
PDF
MAX1005 IF Undersampler MAX1005
Maxim
PDF
MAX1007 Mobile-Radio Analog Controller MAX1007
Maxim
PDF
MAX101 500Msps / 8-Bit ADC with Track/Hold MAX101
Maxim
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components