http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




3M
3M


M10BC

Butt Connector Non-Insulated Seamless


No Preview Available !

M10BC pdf
ScotchlokTerminals
M18BC, M14BC, M10BC
Butt Connector, Non-Insulated, Seamless
Data Sheet
L
Product
Number
M188BC
M144BC
M100BC
Wire Range
(LAWG)
223-1
16-1
121-1
01.6
0.16
08.8
Thickness
0.803
0.003
08.03
Barrel
Length
02.2
05.3
02.3
Barrel
I.D.
0.06
0.09
0.14
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 486C
3M FILE NO. E23438
Specifications
Wire Size:
Barrel Seam:
Maximum Current:
Terminal Material:
Terminal Plating:
Installation Information
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. 22.2
NO. 0, 65
3M FILE NO. LR22190
See Table Above
Seamless
Same as Wire
ETP Copper
Tin
ƽ WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropr iate electrical codes.
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool:TH-440,TH-450 (scissor style) or
TR-490 (ratchet style) hand tools.
Barrel Crimp (Required)
http://www.Datasheet4U.com



No Preview Available !

M10BC pdf
Engineering Specification
Crimp-type terminals shall, electrically and mechanicall,y The non-insulated,seamless butt connector shall be tin
connect permanently to the pre-stripped end of tow
plated,annealed coppe,r having a double-length,round
stranded copper wires.
seamless barrel with a center stops,ized for a speciifed
(AWG) wire range (22-18,16-14, 12-10).
The connector line shall offer barrel variations in wire
(AWG) size (22-18,16-14, 12-10) and construction (non-
insulated brazed seam,vinyl insulated butted seam,nylon
insulated seamless,etc...).The connector line shall hvae
regulatory agency coverage (UL Listing,CSA
Certification).The connectors shall be marekd with the
wire range and manuafcturer’s symbol ( ).
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and deter mine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from def ects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase pr ice of the 3M prod uct. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theor y asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8125-9669-6-A



Part Number M10BC
Description Butt Connector Non-Insulated Seamless
Maker 3M - 3M
Total Page 2 Pages
PDF Download
M10BC pdf
Download PDF File
M10BC pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
M100 MINIATURE PLASTIC SILICON RECTIFIER M100
ETC
PDF
M1008 16-BIT CCD/CIS ANALOG SIGNAL PROCESSOR M1008
Unisonic Technologies
PDF
M100A GENERAL PURPOSE PLASTIC RECTIFIER M100A
General Semiconductor
PDF
M100A MINIATURE PLASTIC SILICON RECTIFIER M100A
ETC
PDF
M100B GENERAL PURPOSE PLASTIC RECTIFIER M100B
General Semiconductor
PDF
M100B MINIATURE PLASTIC SILICON RECTIFIER M100B
ETC
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components