11 May 2010
Page Subjects (major changes since last revision)
19 section 3:10 burst mode enable
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or
the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://
CoolMOS™, CoolSET™ are trademarks of Infineon Technologies AG.
Edition 24 May 2011
Infineon Technologies AG
81726 Munich, Germany
© 2010 Infineon Technologies AG
All Rights Reserved.
Legal Disclaim er
The inform ation given in this docum ent shall in no event be regarded as a guarantee of
conditions or characteristics. W ith respect to any exam ples or hints given herein, any typical
values stated herein and/or any inform ation regarding the application of the device,
Infineon Technologies hereby disclaim s any and all warranties and liabilities of any kind,
including without lim itation, warranties of non-infringem ent of intellectual property rights
of any third party.
For further inform ation on technology, delivery term s and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com ).
Due to technical requirem ents, com ponents m ay contain dangerous substances. For inform ation
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies com ponents m ay be used in life-support devices or system s only with
the express written approval of Infineon Technologies, if a failure of such com ponents can
reasonably be expected to cause the failure of that life-support device or system or to affect
the safety or effectiveness of that device or system . Life support devices or system s are
intended to be im planted in the hum an body or to support and/or m aintain and sustain
and/or protect hum an life. If they fail, it is reasonable to assum e that the health of the user
or other persons may be endangered.