http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Cypress Semiconductor Electronic Components Datasheet



CCG2

USB Type-C Port Controller



No Preview Available !

CCG2 pdf
EZ-PD™ CCG2 Datasheet
USB Type-C Port Controller
USB Type-C Port Controller
General Description
EZ-PD™ CCG2 is a USB Type-C controller that complies with the latest USB Type-C and PD standards. EZ-PD CCG2 provides a
complete USB Type-C and USB Power Delivery port control solution for passive cables, active cables, and powered accessories. It
can also be used in many upstream and downstream facing port applications. EZ-PD CCG2 uses Cypress’s proprietary M0S8
technology with a 32-bit, 48-MHz ARM® Cortex®-M0 processor with 32-KB flash and integrates a complete Type-C Transceiver
including the Type-C termination resistors RP, RD and RA.
Applications
Type-C Support
USB Type-C EMCA cables
USB Type-C powered accessories
USB Type-C upstream facing ports
USB Type-C downstream facing ports
Features
Integrated transceiver (baseband PHY)
Integrated UFP (RD), EMCA (RA) termination resistors, and
current sources for DFP (RP)
Supports one USB Type-C port
Low-Power Operation
2.7-V to 5.5-V operation
32-bit MCU Subsystem
48-MHz ARM Cortex-M0 CPU
32-KB Flash
4-KB SRAM
In-system reprogrammable
Integrated Digital Blocks
Integrated timers and counters to meet response times
required by the USB-PD protocol
Run-time reconfigurable serial communication block (SCB)
with reconfigurable I2C, SPI, or UART functionality
Clocks and Oscillators
Integrated oscillator eliminating the need for external clock
Two independent VCONN rails with integrated isolation
between the two
Independent supply voltage pin for GPIO that allows 1.71-V to
5.5-V signaling on the I/Os
Reset: 1.0 µA, Deep Sleep: 2.5 µA, Sleep: 2.0 mA
System-Level ESD on CC and VCONN Pins
± 8-kV Contact Discharge and ±15-kV Air Gap Discharge based
on IEC61000-4-2 level 4C
Packages
1.63 mm × 2.03 mm, 20-ball wafer-level CSP (WLCSP) with
0.4-mm ball pitch
2.5 mm × 3.5 mm × 0.6 mm 14-pin DFN
4.0 mm × 4.0 mm, 0.55 mm 24-pin QFN
Supports industrial (40 °C to +85 °C) and extended industrial
(40 °C to +105 °C) temperature ranges
Logic Block Diagram
CCG2: USB Type-C Cable Controller
MCU Subsystem
Integrated Digital Blocks
TCPWM1
CORTEX-M0
48 MHz
SCB2
(I2C, SPI, UART)
SCB2
(I2C, SPI, UART)
Profiles and
Configurations
I/O Subsystem
CC5
VCONN1
VCONN2
VDDIO
GPIO6
Port
Flash
(32 KB)
SRAM
(4 KB)
Baseband MAC
Baseband PHY
Integrated Rd3, Ra4,
and Rp7
Serial Wire Debug
1 Timer, counter, pulse-width modulation block
2 Serial communication block configurable as UART, SPI, or I2C
3 Termination resistor denoting a UFP
4 Termination resistor denoting an EMCA
5 Configuration Channel
6 General-purpose input/output
7 Current Sources to indicate a DFP
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-93912 Rev. *L
• San Jose, CA 95134-1709 • 408-943-2600
Revised August 2, 2016



No Preview Available !

CCG2 pdf
EZ-PD™ CCG2 Datasheet
Available Firmware and Software Tools
EZ-PD Configuration Utility
The EZ-PD Configuration Utility is a GUI-based Microsoft Windows application developed by Cypress to guide a CCGx user through
the process of configuring and programming the chip. The utility allows users to:
1. Select and configure the parameters they want to modify
2. Program the resulting configuration onto the target CCGx device.
The utility works with the Cypress supplied CCG1, CCG2, CCG3, and CCG4 kits, which host the CCGx controllers along with a USB
interface. This version of the EZ-PD Configuration Utility supports configuration and firmware update operations on CCGx controllers
implementing EMCA and Display Dongle applications. Support for other applications, such as Power Adapters and Notebook port
controllers, will be provided in later versions of the utility.
You can download the EZ-PD Configuration Utility and its associated documentation at the following link:
http://www.cypress.com/documentation/software-and-drivers/ez-pd-configuration-utility
Document Number: 001-93912 Rev. *L
Page 2 of 33



Part Number CCG2
Description USB Type-C Port Controller
Maker Cypress Semiconductor - Cypress Semiconductor
Total Page 30 Pages
PDF Download
CCG2 pdf
Download PDF File
CCG2 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
CC-025-025 Clamping Couplings / Recessed Screws CC-025-025
ETC
PDF
CC-037-025 Clamping Couplings / Recessed Screws CC-037-025
ETC
PDF
CC-037-037 Clamping Couplings / Recessed Screws CC-037-037
ETC
PDF
CC-050-037 Clamping Couplings / Recessed Screws CC-050-037
ETC
PDF
CC-050-050 Clamping Couplings / Recessed Screws CC-050-050
ETC
PDF
CC-062-050 Clamping Couplings / Recessed Screws CC-062-050
ETC
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components