http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Diodes Semiconductor Electronic Components Datasheet


AP1115

0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR


No Preview Available !

AP1115 pdf
Features
AP1115
0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
General Description
1.3V Maximum Dropout at Full Load Current
Fast Transient Response
Output Current Limiting
Built-in Thermal Shutdown
Good Noise Rejection
3-Terminal Adjustable or Fixed 1.5V / 1.8V / 2.5V /
2.8V/ 3.0V / 3.3V / 3.5V / 5.0V
Package: SOT89-3L
Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
AP1115 is a low dropout positive adjustable or fixed mode
regulator with 0.6A output current capability. The product is
specifically designed to provide well-regulated supply for low
voltage IC applications such as high-speed bus termination and
low current 3.3V logic supply. AP1115 is also well suited for other
applications such as VGA cards. AP1115 is guaranteed to have
<1.3V dropout at full load current making it ideal to provide well
regulated outputs of 1.25V to 5V with up to 18V input supply.
Applications
PC Peripheral
Communication
Ordering Information
AP 1115 X X XX X X
Pin Version
Package
A: Pin1:Vout
Y : SOT89-3L
2:Adj(GND)
3:Vin
B: Pin1:Adj(GND)
2:Vin
3:Vout
Vout
Blank : ADJ
15 : 1.5V
18 : 1.8V
25 : 2.5V
28 : 2.8V
30 : 3.0V
33 : 3.3V
35 : 3.5V
50 : 5.0V
Lead Free
Packing
L : Lead Free Package -13 : Taping
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
AP1115XY
Package Packaging
Code (Note 2)
Y SOT89-3L
13” Tape and Reel Ammo Box
Bulk
Part Part
Part
Quantity Quantity Number Number Quantity Number
2500/Tape &
Reel
-13
Suffix
NA
Suffix
NA
Suffix
NA NA
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP1115 Rev. 1
1 of 7
www.diodes.com
NOVEMBER 2006
© Diodes Incorporated



No Preview Available !

AP1115 pdf
AP1115
0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Connection Diagram (Top View)
AP1115A-3 PIN SOT89-3L
3 Vin
2 Adj (GND)
1
Tab is Pin 2
Vout
AP1115B-3 PIN SOT89-3L
3
2
1
Tab is Pin 2
Vout
Vin
Adj (GND)
Pin Descriptions
NAME I/O
FUNCTION
Adj (GND)
I
A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground
only for Fixed-Mode).
Vout
O
The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ ESR 20) must be
connected from this pin to ground to insure stability.
The input pin of regulator. Typically a large storage capacitor (0.15Ω ≤ ESR 20) is
Vin
I
connected from this pin to ground to insure that the input voltage does not sag below the
minimum dropout voltage during the load transient response. This pin must always be 1.3V
higher than Vout in order for the device to regulate properly.
AP1115 Rev. 1
2 of 7
www.diodes.com
NOVEMBER 2006
© Diodes Incorporated



Part Number AP1115
Description 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR
Maker Diodes Incorporated - Diodes Incorporated
Total Page 7 Pages
PDF Download
AP1115 pdf
Download PDF File
AP1115 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR AP1115
Diodes Incorporated
PDF
AP1115 0.6A Low Dropout Positive Adjustable or Fixed-Mode Regulator AP1115
Anachip
PDF
AP1116 0.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator AP1116
ETC
PDF
AP1116Y 0.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator AP1116Y
ETC
PDF
AP1116Y15 0.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator AP1116Y15
ETC
PDF
AP1116Y15A 0.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator AP1116Y15A
ETC
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components