HIGH SENSITIVITY MICROPOWER
OMNIPOLAR HALL-EFFECT SWITCH
The AH9250 is a high sensitivity Hall-effect switch with internal pull-up
resistor on the output, designed for battery operated handheld
equipments to industrial applications.
A chopper stabilized architecture improves stability of magnetic switch
points over the whole operating range. A sleep-awake logic controls
the sleep and awake time to reduce the average operating current of
the device. During the awake time, the output is changed with the
magnetic flux density. During the sleep time, the output is latched in
its previous state and the current consumption reduces to 4µA typical
at 3V. The average current consumption is 8µA at 3V.
The output can be switched on with either north or south pole of
sufficient strength. If the magnetic flux density perpendicular to the
part marking surface is larger than operating point (BOP), the output
will be turned on; if it is less than releasing point (BRP), the output will
be turned off.
The AH9250 is available in industry standard TO92S and SC59
Omnipolar Operation (Switching with North or South Poles)
2.5V to 5.5V Power Supply
Built in Pull-up Resistor on the Output
Superior Temperature Stability
Digital Output Signal
-40°C to +85°C Operating Temperature
ESD (HBM): 5000V
Small Low Profile Industry Standard SC59 and TO92S Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Cover Switch in Notebook PC/PDA
Handheld Wireless Applications Proximity Detection Switches
Doors, Lids, Covers and Tray Position Detect Switches
Liquid Level Detection
Battery Powered Consumer, Home Appliances and Industrial
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Document number: DS38217 Rev.1 - 2
1 of 10
© Diodes Incorporated