http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Diodes Semiconductor Electronic Components Datasheet


AH1897

HIGH SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH


No Preview Available !

AH1897 pdf
AH1897
HIGH SENSITIVITY MICROPOWER
OMNIPLOAR HALL-EFFECT SWITCH
Description
The AH1897 is a high sensitivity micropower Omnipolar Hall effect
switch IC with an internal pull up and pull down capability. Designed
for portable and battery powered equipment such as cellular phones
and portable PCs, the average supply current is only 4.3µA at 1.85V.
To support portable equipment the AH1897 can operate over the
supply range of 1.6V to 3.6V and uses a hibernating clocking system
to minimize the power consumption. To minimize PCB space the
AH1897 is available in a small low profile X1-DFN1216-4 package.
The output is activated with either a North or South pole of sufficient
magnetic field strength. When the magnetic flux density (B)
perpendicular to the package is larger than operate point (Bop), the
output will be turned on (pulled low). The output is turned off when
B becomes lower than the release point (Brp). The output will remain
off when there is no magnetic field.
Features
Omnipolar Operation (North or South Pole)
Supply Voltage of 1.6V to 3.6V
Micropower Operation
Chopper Stabilized Design Provides:
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Physical Stress
No External Pull-up Resistors Required
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
Small Low Profile X1-DFN1216-4 Package
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
(Top View)
X1-DFN1216-4
Applications
Cover or Display Switch in Portable PCs
Open and Close Detect for Cellular Phones
Holster or Cover Detect for Cellular Phones and Tablet PCs
Digital Still, Video Cameras and Handheld Gaming Consoles
Contact-Less Switches
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 100nF typical.
AH1897
Document number: DS36470 Rev. 1 - 2
1 of 8
www.diodes.com
August 2013
© Diodes Incorporated



No Preview Available !

AH1897 pdf
Pin Descriptions
Package: X1-DFN1216-4
Pin Number Pin Name
1 VDD
2 GND
3 NC
4 OUTPUT
Power Supply Input
Ground Pin
No Connection (Note 5)
Output Pin
Function
Note:
5. NC is “No Connection” pin and is not connected internally. This pin can be left open or tied to ground.
Functional Block Diagram
AH1897
AH1897
Document number: DS36470 Rev. 1 - 2
2 of 8
www.diodes.com
August 2013
© Diodes Incorporated



Part Number AH1897
Description HIGH SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH
Maker Diodes - Diodes
Total Page 8 Pages
PDF Download
AH1897 pdf
Download PDF File
AH1897 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
AH180 MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH AH180
Diodes Incorporated
PDF
AH1801 ULTRA-SENSITIVE HALL EFFECT SWITCH AH1801
Diodes
PDF
AH1802 ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCH AH1802
Diodes
PDF
AH1803 ULTRA-SENSITIVE HALL EFFECT SWITCH AH1803
Diodes
PDF
AH1804 MICROPOWER OMNIPOLAR HALL EFFECT SENSORSWITCH AH1804
Diodes
PDF
AH1806 HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH1806
Diodes
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components