http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Diodes Semiconductor Electronic Components Datasheet


AH1892

PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH


No Preview Available !

AH1892 pdf
AH1892
PROGRAMMABLE MICROPOWER OMNIPOLAR
HALL-EFFECT SENSOR SWITCH
Description
The AH1892 is a micropower magnetic range selectable (Bop/Brp)
Omnipolar Hall effect switch IC with internal pull up and pull down
capability, designed for consumer equipment ranging from portable
and battery powered cellular phones and portable PCs to home
appliances and industrial applications. To support battery powered
equipment and low voltage microcontrollers, the AH1892 can operate
over the supply range of 1.6V to 3.6V and uses a hibernating clocking
system to minimize the power consumption. The average supply
current is only 4.3µA typical at 1.80V. Due to the application diversity,
the AH1892 has an 8kV ESD rating on the supply and output pins. To
minimize PCB space the AH1892 is packaged in the small CSP
package (0.71mm x 0.71mm) or SOT553 leaded package
Pin Assignments
U-WLB0707-4
The output is activated with either a north or south pole of sufficient
magnetic field strength. The user can select one of two magnetic
sensitivity bands via the BSEL pin without the addition of any external
components allowing a flexible but small solution. The band select
can be hardwired or be changed on the fly via a logic source such as
a micro-controller. When the magnetic flux density (B) is larger than
operate point (Bop), the output will be turned on (pulled low) and held
until B is lower than release point (Brp).
Features
• Omnipolar operation (North or South pole)
• Programmable operate and release points
• Supply voltage of 1.6V to 3.6V
• Micropower operation
• Chopper stabilized design
ƒ Superior temperature stability
ƒ Extremely Low Switch-Point Drift
ƒ Insensitive to Physical Stress
• No external pull up resistors required
• Good RF noise immunity
• -40°C to +85°C operating temperature
• 8kV ESD on supply and output pins
• Miniature U-WLB07070-4 (CSP 0.71mm x 0.71mm typical) and
small low profile SOT553
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
www.DataSheet.co.kr
SOT553
Applications
• Open and close detect for gaming and cellular phones
• Holster and dock detect for cellular phones
• Cover switch in portable and tablet PCs
• Digital still and video cameras
• Tray, door and covers position detect for printers and scanners
• Contact-less switch in consumer and industrial products
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
AH1892
Document number: DS35092 Rev. 1 - 2
1 of 11
www.diodes.com
May 2012
© Diodes Incorporated
Datasheet pdf - http://www.DataSheet4U.net/



No Preview Available !

AH1892 pdf
Typical Application Circuit
AH1892
PROGRAMMABLE MICROPOWER OMNIPOLAR
HALL-EFFECT SENSOR SWITCH
Note : CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 100nF typical
Pin Descriptions
Package: U-WLB0707-4
Pin #
A1
A2
B1
B2
Pin Name
GND
OUTPUT
BSEL
VDD
Description
Ground
Output
Band Select
Power Supply Voltage
Package: SOT553
www.DataSheet.co.kr
Pin #
Pin Name
Description
1
2
3
4
5
Notes:
VDD Power Supply Voltage
NC No Connection (Note 4)
BSEL
Band Select
GND
Ground
OUTPUT Output
4. NC is “No Connection” pin and is not connected internally. This pin can be left open or connected to ground.
Functional Block Diagram
AH1892
Document number: DS35092 Rev. 1 - 2
2 of 11
www.diodes.com
May 2012
© Diodes Incorporated
Datasheet pdf - http://www.DataSheet4U.net/



Part Number AH1892
Description PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH
Maker Diodes - Diodes
Total Page 11 Pages
PDF Download
AH1892 pdf
Download PDF File
AH1892 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
AH180 MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH AH180
Diodes Incorporated
PDF
AH1801 ULTRA-SENSITIVE HALL EFFECT SWITCH AH1801
Diodes
PDF
AH1802 ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCH AH1802
Diodes
PDF
AH1803 ULTRA-SENSITIVE HALL EFFECT SWITCH AH1803
Diodes
PDF
AH1804 MICROPOWER OMNIPOLAR HALL EFFECT SENSORSWITCH AH1804
Diodes
PDF
AH1806 HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH1806
Diodes
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components