http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Analog Devices Semiconductor Electronic Components Datasheet



AD6643

Dual IF Receiver 1.8V supply voltages Internal ADC voltage reference


No Preview Available !

AD6643 pdf
www.DataSheet4U.net
FEATURES
Performance with NSR enabled
SNR: 76.1 dBFS in a 40 MHz band to 90 MHz at 185 MSPS
SNR: 73.6 dBFS in a 60 MHz band to 90 MHz at 185 MSPS
Performance with NSR disabled
SNR: 66.5 dBFS up to 90 MHz at 185 MSPS
SFDR: 88 dBc up to 185 MHz at 185 MSPS
Total power consumption: 706 mW at 200 MSPS
1.8 V supply voltages
LVDS (ANSI-644 levels) outputs
Integer 1-to-8 input clock divider (625 MHz maximum input)
Internal ADC voltage reference
Flexible analog input range
1.4 V p-p to 2.0 V p-p (1.75 V p-p nominal)
Differential analog inputs with 400 MHz bandwidth
95 dB channel isolation/crosstalk
Serial port control
Energy saving power-down modes
User-configurable, built-in self test (BIST) capability
APPLICATIONS
Communications
Diversity radio and smart antenna (MIMO) systems
Multimode digital receivers (3G)
WCDMA, LTE, CDMA2000
WiMAX, TD-SCDMA
I/Q demodulation systems
General-purpose software radios
GENERAL DESCRIPTION
The AD6643 is an 11-bit, 200 MSPS, dual-channel intermediate
frequency (IF) receiver specifically designed to support multi-
antenna systems in telecommunication applications where high
dynamic range performance, low power, and small size are desired.
The device consists of two high performance analog-to-digital
converters (ADCs) and noise shaping requantizer (NSR) digital
blocks. Each ADC consists of a multistage, differential pipelined
architecture with integrated output error correction logic, and
each ADC features a wide bandwidth switched capacitor sampling
network within the first stage of the differential pipeline. An
integrated voltage reference eases design considerations. A duty
cycle stabilizer (DCS) compensates for variations in the ADC
clock duty cycle, allowing the converters to maintain excellent
performance.
Dual IF Receiver
AD6643
VIN+A
VIN–A
VCM
VIN+B
VIN–B
FUNCTIONAL BLOCK DIAGRAM
AVDD
AGND
DRVDD
AD6643
PIPELINE 14 NOISE SHAPING 11
ADC
REQUANTIZER
PIPELINE 14 NOISE SHAPING 11
ADC
REQUANTIZER
REFERENCE
SERIAL PORT
CLOCK
DIVIDER
DCO±
D0±
D10±
OEB
SYNC
PDWN
SCLK SDIO CSB
CLK+ CLK–
NOTES
1. THE D0± TO D10± PINS REPRESENT BOTH THE CHANNEL A
AND CHANNEL B LVDS OUTPUT DATA.
Figure 1.
Each ADC output is connected internally to an NSR block. The
integrated NSR circuitry allows for improved SNR performance in
a smaller frequency band within the Nyquist bandwidth. The
device supports two different output modes selectable via the SPI.
With the NSR feature enabled, the outputs of the ADCs are
processed such that the AD6643 supports enhanced SNR per-
formance within a limited portion of the Nyquist bandwidth
while maintaining an 11-bit output resolution.
The NSR block can be programmed to provide a bandwidth
of either 22% or 33% of the sample clock. For example, with a
sample clock rate of 185 MSPS, the AD6643 can achieve up to
75.5 dBFS SNR for a 40 MHz bandwidth in the 22% mode and
up to 73.7 dBFS SNR for a 60 MHz bandwidth in the 33% mode.
(continued on Page 3)
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.



No Preview Available !

AD6643 pdf
AD6643
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Product Highlights ........................................................................... 3
Specifications..................................................................................... 4
ADC DC Specifications................................................................. 4
ADC AC Specifications ................................................................. 5
Digital Specifications ..................................................................... 6
Switching Specifications ................................................................ 8
Timing Specifications .................................................................. 8
Absolute Maximum Ratings.......................................................... 10
Thermal Characteristics ............................................................ 10
ESD Caution................................................................................ 10
Pin Configurations and Function Descriptions ......................... 11
Typical Performance Characteristics ........................................... 15
Equivalent Circuits ......................................................................... 18
Theory of Operation ...................................................................... 19
ADC Architecture ...................................................................... 19
Analog Input Considerations.................................................... 19
REVISION HISTORY
4/11—Revision 0: Initial Version
Voltage Reference ....................................................................... 21
Clock Input Considerations...................................................... 21
Power Dissipation and Standby Mode .................................... 22
Digital Outputs ........................................................................... 23
Noise Shaping Requantizer (NSR) ............................................... 24
22% BW Mode (>40 MHz at 184.32 MSPS)........................... 24
33% BW Mode (>60 MHz at 184.32 MSPS)........................... 25
Channel/Chip Synchronization.................................................... 26
Serial Port Interface (SPI).............................................................. 27
Configuration Using the SPI..................................................... 27
Hardware Interface..................................................................... 27
SPI Accessible Features.............................................................. 28
Memory Map .................................................................................. 29
Reading the Memory Map Register Table............................... 29
Memory Map Register Table..................................................... 30
Memory Map Register Description ......................................... 32
Applications Information .............................................................. 34
Design Guidelines ...................................................................... 34
Outline Dimensions ....................................................................... 35
Ordering Guide .......................................................................... 35
Rev. 0 | Page 2 of 36



Part Number AD6643
Description Dual IF Receiver 1.8V supply voltages Internal ADC voltage reference
Maker Analog Devices - Analog Devices
Total Page 30 Pages
PDF Download
AD6643 pdf
Download PDF File
AD6643 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
AD660 Monolithic 16-Bit Serial/Byte DACPORT AD660
Analog Devices
PDF
AD6600 Dual Channel/ Gain-Ranging ADC with RSSI AD6600
Analog Devices
PDF
AD6620 65 MSPS Digital Receive Signal Processor AD6620
Analog Devices
PDF
AD6622 Four-Channel/ 75 MSPS Digital Transmit Signal Processor TSP AD6622
Analog Devices
PDF
AD6623 4-Channel/ 104 MSPS Digital Transmit Signal Processor TSP AD6623
Analog Devices
PDF
AD6624 80 MSPS Digital Receive Signal Processor AD6624
Analog Devices
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components