http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Analog Devices Semiconductor Electronic Components Datasheet



AD1315

High Speed Active Load with Inhibit Mode


No Preview Available !

AD1315 pdf
a
FEATURES
+50 mA Voltage Programmable Current Range
1.5 ns Propagation Delay
Inhibit Mode Function
High Speed Differential Inputs for Maximum Flexibility
Hermetically Sealed Small Gull Wing Package
Compatible with AD1321, AD1324 Pin Drivers
APPLICATIONS
Automatic Test Equipment
Semiconductor Test System
Board Level Test System
High Speed Active Load
with Inhibit Mode
AD1315
FUNCTIONAL BLOCK DIAGRAM
PRODUCT DESCRIPTION
The AD1315 is a complete, high speed, current switching load
designed for use in linear, digital or mixed signal test systems.
By combining a high speed monolithic process with a unique
surface mount package, this product attains superb electrical
performance while preserving optimum packaging densities in
an ultrasmall 16-lead, hermetically sealed gull wing package.
Featuring current programmability of up to +50 mA, the
AD1315 is designed to force the device under test to source or
sink the programmed IOHPROG and IOLPROG currents. The IOH
and IOL currents are determined by applying a corresponding
voltage (5 V = 50 mA) to the IOH and IOL pins. The voltage-
to-current conversion is performed within the AD1315 thus
allowing the current levels to be set by a standard voltage out
digital-to-analog converter.
The AD1315’s transition from IOH to IOL occurs when the
output voltage of the device under test slews above or below the
programmed threshold, or commutation voltage. The commuta-
tion voltage is programmable from 2 V to +7 V, covering the
large spectrum of logic devices while able to support the large
current specifications (48 mA) typically associated with line
drivers. To test I/O devices, the active load can be switched into
a high impedance state (Inhibit mode) electrically removing the
active load from the path through the Inhibit mode feature. The
active load leakage current in Inhibit is typically 20 nA.
The Inhibit input circuitry is implemented utilizing high speed
differential inputs with a common-mode voltage range of 7 volts
and a maximum differential voltage of 4 volts. This allows for
the direct interface to the precision of differential ECL timing or
the simplicity of switching the Active Load from a single ended
TTL or CMOS logic source. With switching speeds from IOH
or Io~ into Inhibit of less than 1.5 ns, the AD1315 can be
electrically removed from the signal path “on-the-fly.”
The AD1315 is available in a 16-lead, hermetically sealed gull
wing package and is specified to operate over the ambient com-
mercial temperature range from 0°C to +70°C.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700 World Wide Web Site: http://www.analog.com
Fax: 617/326-8703
© Analog Devices, Inc., 1997



No Preview Available !

AD1315 pdf
AD1315–SPECIFICATIONS (All measurements made in free air at +25؇C. +VS = +10 V, –VS = –5.2 V, unless
otherwise noted.)
Parameter
AD1315KZ
Min Typ Max
Units
Comments
DIFFERENTIAL INPUT CHARACTERISTICS
INH to INH
Input Voltage, Any One Input
Differential Input Range
Bias Current
Current Program Voltage Range
IOH, 0 mA to +50 mA (Sink)1
IOL, 0 mA to –50 mA (Source)1
Input Resistance
IOHRTN, IOCRTN Range2
VCOM, VDUT Range
IOH, 0 mA to +50 mA
IOL, 0 mA to –50 mA
OUTPUT CHARACTERISTICS3
Active (Sink/Source) Mode
Transfer Function
Accuracy
Linearity Error
Gain Error
Offset Error
Output Current TC
Inhibit Mode
Output Capacitance
Inhibit Leakage
DYNAMIC PERFORMANCE3
Propagation Delay
± IMAX to INHIBIT (tPD1)4
INHIBIT to ± IMAX (tPD2)4
POWER SUPPLIES
–VS to +VS Difference
Supply Range
Positive Supply
Negative Supply
Current
Positive Supply5
Negative Supply5
Power Dissipation6
PSRR7
–3.0
0.4 ECL
–2.0 1.0
0
0
50
–2.0
–2.0
0.5
–2.0
–0.12
–2.0
–1.0
10
10
–200
20
+9.5
–5.45
+705
–1005
0.5
1.5
15.2
+10
–5.2
+85
–85
1.3
4.0
4.0
2.0
+5.0
+5.0
+7.0
+7.0
+7.0
+4.0
+0.12
+2.0
+1.0
3.0
200
1.5
3.0
15.4
+10.5
–4.95
+100
–70
1.54
0.05
Volts
Volts
mA
Volts
Volts
k
Volts
Volts
Volts
Volts
VDUT – VCOM >1 V
VCOM – VDUT >1 V
mA/V
% FSR
% FSR
mA
µA/°C
pF
nA
ns
ns
Volts
Volts
Volts
mA
mA
%/%
See Figure 1
See Figure 1
See Figure 2
NOTES
1IOHPROG/IOLPROG voltage range may be extended to –100 mV due to a possible 1 mA offset current.
2IOHRTN/IOLRTN should be connected to VCOM to minimize power dissipation.
3VDUT = –2 V to +7 V, CTOTAL = 10 pF, RDUT = 10 . For inhibit leakage tests, VDUT = 0 V to +5.9 V, IOH = –4 mA, IOL = +4 mA, TCASE = +36°C.
4Measured from the ECL crossing to the 10% change in the output current.
5IPROGRAM = ± 50 mA.
6Maximum power dissipation with +VS = +10 V, –VS = 5.2 V, IPROGRAM 50 mA, VCOM = VDUT = 0 V.
7For a 1% change in +VS or VS, the output current may change a maximum of 0.05% of Full Scale Range (FSR).
Specifications subject to change without notice.
–2– REV. A



Part Number AD1315
Description High Speed Active Load with Inhibit Mode
Maker Analog Devices - Analog Devices
Total Page 8 Pages
PDF Download
AD1315 pdf
Download PDF File
AD1315 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
AD1315 High Speed Active Load with Inhibit Mode AD1315
Analog Devices
PDF
AD1317 Ultrahigh Speed Window Comparator with Latch AD1317
Analog Devices
PDF
AD1324 Ultrahigh Speed Pin Driver with Inhibit Mode AD1324
Analog Devices
PDF
AD13280 Dual Channel/ 12-Bit/ 80 MSPS A/D Converter with Analog Input Signal Conditioning AD13280
Analog Devices
PDF
AD13465 Dual Channel/ 14-Bit/ 65 MSPS A/D Converter with Analog Input Signal Conditioning AD13465
Analog Devices
PDF
AD1362 16-Channel/12-Bit Data Acquisition System AD1362
Analog Devices
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components