http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Atmel Electronic Components Datasheet



93C56

3-Wire Serial EEPROMs



No Preview Available !

93C56 pdf
Features
Low-voltage and Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
User-selectable Internal Organization
– 1K: 128 x 8 or 64 x 16
– 2K: 256 x 8 or 128 x 16
– 4K: 512 x 8 or 256 x 16
Three-wire Serial Interface
2 MHz Clock Rate (5V)
Self-timed Write Cycle (10 ms max)
High Reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
Automotive Grade, Extended Temperature and Lead-Free/Halogen-Free
Devices Available
8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP,
and 8-ball dBGA2 Packages
Description
The AT93C46/56/66 provides 1024/2048/4096 bits of serial electrically erasable pro-
grammable read-only memory (EEPROM), organized as 64/128/256 words of 16 bits
each (when the ORG pin is connected to VCC), and 128/256/512 words of 8 bits each
(when the ORG pin is tied to ground). The device is optimized for use in many indus-
trial and commercial applications where low-power and low-voltage operations are
essential. The AT93C46/56/66 is available in space-saving 8-lead PDIP, 8-lead
JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, and 8-lead dBGA2
packages.
The AT93C46/56/66 is enabled through the Chip Select pin (CS) and accessed via a
three-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift
Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the
data is clocked out serially on the DO pin. The Write cycle is completely self-timed,
and no separate Erase cycle is required before Write. The Write cycle is only enabled
when the part is in the Erase/Write Enable state. When CS is brought high following
the initiation of a Write cycle, the DO pin outputs the Ready/Busy status of the part.
The AT93C46/56/66 is available in 2.7V to 5.5V and 1.8V to 5.5V versions.
Table 1. Pin Configurations
Pin Name
Function
CS Chip Select
SK Serial Data Clock
DI Serial Data Input
DO Serial Data Output
GND
Ground
VCC
Power Supply
ORG
Internal Organization
DC Don’t Connect
8-lead SOIC
8-lead dBGA2
CS 1
SK 2
DI 3
DO 4
8 VCC
7 DC
6 ORG
5 GND
VCC
DC
ORG
GND
8
7
6
5
1 CS
2 SK
3 D1
4 D0
8-lead PDIP
CS 1
SK 2
DI 3
DO 4
8 VCC
7 DC
6 ORG
5 GND
8-lead SOIC
Rotated (R)
(1K JEDEC Only)
DC
VCC
CS
SK
1
2
3
4
8 ORG
7 GND
6 DO
5 DI
8-lead MAP
VCC 8
DC 7
ORG 6
GND 5
1 CS
2 SK
3 DI
4 DO
8-lead TSSOP
CS 1
SK 2
DI 3
DO 4
8 VCC
7 DC
6 ORG
5 GND
Three-wire
Serial
EEPROMs
1K (128 x 8 or 64 x 16)
2K (256 x 8 or 128 x 16)
4K (512 x 8 or 256 x 16)
AT93C46
AT93C56(1)
AT93C66(2)
Note: 1. This device is not recom-
mended for new designs.
Please refer to AT93C56A.
2. This device is not recom-
mended for new designs.
Please refer to AT93C66A.
0172Z–SEEPR–9/05
1



No Preview Available !

93C56 pdf
Absolute Maximum Ratings*
Operating Temperature......................................−55°C to +125°C
Storage Temperature .........................................−65°C to +150°C
Voltage on Any Pin
with Respect to Ground ........................................ −1.0V to +7.0V
Maximum Operating Voltage .......................................... 6.25V
DC Output Current........................................................ 5.0 mA
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only, and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability
Figure 1. Block Diagram
Note:
When the ORG pin is connected to VCC, the “x 16” organization is selected. When it is
connected to ground, the “x 8” organization is selected. If the ORG pin is left uncon-
nected and the application does not load the input beyond the capability of the internal 1
Meg ohm pullup, then the “x 16” organization is selected. The feature is not available on
the 1.8V devices.
For the AT93C46, if “x 16” organization is the mode of choice and Pin 6 (ORG) is left
unconnected, Atmel recommends using the AT93C46A device. For more details, see the
AT93C46A datasheet.
2 AT93C46/56/66
0172Z–SEEPR–9/05



Part Number 93C56
Description 3-Wire Serial EEPROMs
Maker ATMEL Corporation - ATMEL Corporation
Total Page 21 Pages
PDF Download
93C56 pdf
Download PDF File
93C56 pdf
View for Mobile



Featured Datasheets

Part Number Description Manufacturers PDF
93C06 256 Bit/1K 5.0V CMOS Serial EEPROM 93C06
Microchip Technology
PDF
93C06-EJ 256 Bit/1K 5.0V CMOS Serial EEPROM 93C06-EJ
Microchip Technology
PDF
93C06-EP 256 Bit/1K 5.0V CMOS Serial EEPROM 93C06-EP
Microchip Technology
PDF
93C06-ESM 256 Bit/1K 5.0V CMOS Serial EEPROM 93C06-ESM
Microchip Technology
PDF
93C06-ESN 256 Bit/1K 5.0V CMOS Serial EEPROM 93C06-ESN
Microchip Technology
PDF
93C06-IJ 256 Bit/1K 5.0V CMOS Serial EEPROM 93C06-IJ
Microchip Technology
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components