http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Micropac Industries
Micropac Industries


61083-101

SURFACE MOUNT (PNP) GENERAL PURPOSE TRANSISTOR


No Preview Available !

61083-101 pdf
61083
SURFACE MOUNT (PNP)
GENERAL PURPOSE TRANSISTOR
(2N2907AUA)
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Hermetically sealed
Miniature package to minimize circuit board area
Ceramic surface mount package
MIL-PRF-19500 screening available
Applications:
Analog Switches
Signal Conditioning
Small Signal Amplifiers
High Density Packaging
DESCRIPTION
The 61083 is a hermetically sealed ceramic surface mount general purpose switching transistor. This miniature ceramic
package is ideal for designs where board space and device weight are important requirements. This device is available
custom binned to customer specifications or screened to MIL-PRF-19500.
ABSOLUTE MAXIMUM RATINGS
Collector-Base Voltage ...............................................................................................................................................................60V
Collector-Emitter Voltage............................................................................................................................................................60V
Emitter-Collector Voltage..............................................................................................................................................................5V
Continuous Collector Current ............................................................................................................................................... 600mA
Power Dissipation (Derate at the rate of 2.28 mW/°C above 25°C) .................................................................................. 400mW
Maximum Junction Temperature............................................................................................................................................200°C
Operating Temperature (See part selection guide for actual operating temperature) ......................................... -65°C to +200°C
Storage Temperature............................................................................................................................................. -65°C to +200°C
Lead Soldering Temperature (vapor phase reflow for 30 seconds) .....................................................................................215°C
Package Dimensions
Schematic Diagram
PIN 1
IDENTIFIER
0.225 [5.72]
0.215 [5.46]
0.155 [1.40]
0.145 [3.68]
0.075 [1.91]
0.061 [1.55]
0.028 [0.17] 1
0.022 [0.56]
4
0.048 [1.22]
2 0.032 [0.81]
3 PL
3
0.088 [2.24]
0.072 [1.83]
0.055 [1.40]
0.045 [1.14]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
B
3
1
C
E
2
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
8-2



No Preview Available !

61083-101 pdf
61083
SURFACE MOUNT PNP GENERAL PURPOSE TRANSISTOR (TYPE 2N2907AUA)
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector-Base Cutoff Current
SYMBOL
BVCBO
BVCEO
BVEBO
ICBO
MIN
60
60
5
MAX
10
UNITS
V
V
V
nA
TEST CONDITIONS
IC = 10µA, IE = 0
IC = 10mA, IB = 0µA
IC = 0, IE = 10µA
VCB = 50V, IE = 0
NOTE
10 µA VCB = 50V, IE = 0, TA = 150°C
Collector-Emitter Cutoff Current
Emitter-Base Cutoff Current
ICES
IEBO
50 nA
50 nA
VCE = 30V
VEB = 3.5V, IC = 0
hfe1 75
- VCE = 10V, IC = 0.1mA
hfe2
100 450
-
VCE = 10V, IC = 1mA
Forward-Current Transfer Ratio
hfe3 100
- VCE = 10V, IC = 10mA
hfe4
100 300
-
VCE = 10V, IC = 150mA
1
hfe5 50
-
VCE = 10V, IC = 500mA
1
hfe6 50
- VCE = 10V, IC = 1mA @ -55°C
Collector-Emitter Saturation Voltage
VCE (SAT)
0.40 V
IC = 150mA, IB = 15mA
1.60 V
IC = 500mA, IB = 50mA
Base-Emitter Saturation Voltage
VBE (SAT)
1.30 V
IC = 150mA, IB = 15mA
2.60 V
IC = 500mA, IE = 50mA
SMALL-SIGNAL CHARACTERISTICS
Small Signal Forward Current Transfer Ratio
Small Signal Forward Current Transfer Ratio
Open Circuit Output Capacitance
Input Capacitance (Output Open Capacitance)
Turn-On Time
Turn-Off Time
NOTES:
1. Pulse width < 300µs, duty cycle < 2.0%.
hfe
hfe
COBO
CIBO
ton
toff
100
2
8
30
45
300
- VCE = 10V, IC = 1mA, f = 1kHz
- VCE = 20V, IC =50mA,
f = 100kHz
Pf VCB = 10V, 100kHz, < f < 1 MHz
Pf VEB = 2 V, 100kHz, < f < 1 MHz
Ns VCC = 30V, IC = 150mA,
IB1 = 15mA
ns VCC = 30V, IC = 150mA,
IB1 = IB2 = 15mA
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
MIN
MAX
Bias Voltage-Collector/Emitter
IC 10
150
Collector-Emitter Voltage
VCE 5
SELECTION GUIDE
PART NUMBER
PART DESCRIPTION
61083-001
2N2907AUA, PNP transistor, commercial version
61083-002
2N2907AUA, PNP transistor, JAN level screening
61083-101
2N2907AUA, PNP transistor, JANTX level screening
61083-102
2N2907AUA, PNP transistor, JANTXV level screening
61083-300
2N2907AUA, PNP transistor, JANS level screening
20
UNITS
mA
V
1
1
1
1
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
8-3



Part Number 61083-101
Description SURFACE MOUNT (PNP) GENERAL PURPOSE TRANSISTOR
Maker Micropac Industries - Micropac Industries
Total Page 2 Pages
PDF Download
61083-101 pdf
Download PDF File
61083-101 pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
61083-101 SURFACE MOUNT (PNP) GENERAL PURPOSE TRANSISTOR 61083-101
Micropac Industries
PDF
61083-102 SURFACE MOUNT (PNP) GENERAL PURPOSE TRANSISTOR 61083-102
Micropac Industries
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components