http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




LatticeSemiconductor
LatticeSemiconductor


2032E

In-SystemProgrammableSuperFASTHighDensityPLD


No Preview Available !

2032E pdf
ispLSI® 2032E
In-System Programmable
SuperFAST™ High Density PLD
Features
Functional Block Diagram
• SuperFAST HIGH DENSITY IN-SYSTEM
PROGRAMMABLE LOGIC
— 1000 PLD Gates
— 32 I/O Pins, Two Dedicated Inputs
— 32 Registers
— High Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— 100% Functionally and JEDEC Upward Compatible
with ispLSI 2032 Devices
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
fmax = 225 MHz Maximum Operating Frequency
tpd = 3.5 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— 5V Programmable Logic Core
— ispJTAG™ In-System Programmable via IEEE 1149.1
(JTAG) Test Access Port
— User-Selectable 3.3V or 5V I/O (48-Pin Package Only)
Supports Mixed Voltage Systems
— PCI Compatible Outputs (48-Pin Package Only)
— Open-Drain Output Option
— Electrically Erasable and Reprogrammable
— Non-Volatile
— Unused Product Term Shutdown Saves Power
• ispLSI OFFERS THE FOLLOWING ADDED FEATURES
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Three Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
• ispDesignEXPERT™ – LOGIC COMPILER AND COM-
PLETE ISP DEVICE DESIGN SYSTEMS FROM HDL
SYNTHESIS THROUGH IN-SYSTEM PROGRAMMING
— Superior Quality of Results
— Tightly Integrated with Leading CAE Vendor Tools
— Productivity Enhancing Timing Analyzer, Explore
Tools, Timing Simulator and ispANALYZER™
— PC and UNIX Platforms
A0
Global Routing Pool
(GRP)
A1
A2 GLB
A3
DQ
Logic D Q
Array D Q
DQ
A7
A6
A5
A4
0139Bisp/2000
Description
The ispLSI 2032E is a High Density Programmable Logic
Device. The device contains 32 Registers, 32 Universal
I/O pins, two Dedicated Input Pins, three Dedicated
Clock Input Pins, one dedicated Global OE input pin and
a Global Routing Pool (GRP). The GRP provides com-
plete interconnectivity between all of these elements.
The ispLSI 2032E features 5V in-system programmabil-
ity and in-system diagnostic capabilities. The ispLSI
2032E offers non-volatile reprogrammability of the logic,
as well as the interconnect to provide truly reconfigurable
systems.
The basic unit of logic on the ispLSI 2032E device is the
Generic Logic Block (GLB). The GLBs are labeled A0, A1
.. A7 (see Figure 1). There are a total of eight GLBs in the
ispLSI 2032E device. Each GLB is made up of four
macrocells. Each GLB has 18 inputs, a programmable
AND/OR/Exclusive OR array, and four outputs which can
be configured to be either combinatorial or registered.
Inputs to the GLB come from the GRP and dedicated
inputs. All of the GLB outputs are brought back into the
GRP so that they can be connected to the inputs of any
GLB on the device.
The device also has 32 I/O cells, each of which is directly
connected to an I/O pin. Each I/O cell can be individually
Copyright © 1999 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
June 1999
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
2032e_03
1



No Preview Available !

2032E pdf
Functional Block Diagram
Figure 1. ispLSI 2032E Functional Block Diagram
GOE 0
Specifications ispLSI 2032E
I/O 0
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
I/O 7
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
TDI/IN 0
TDO/IN 1
A0
A1 Global Routing Pool
(GRP)
A2
A3
I/O 31
A7 I/O 30
I/O 29
I/O 28
I/O 27
I/O 26
A6 I/O 25
I/O 24
I/O 23
I/O 22
A5 I/O 21
I/O 20
I/O 19
I/O 18
A4 I/O 17
I/O 16
TMS
BSCAN
Notes:
*Y1 and RESET are multiplexed on the same pin
Y0
Y1*
TCK/Y2
0139/2032E
programmed to be a combinatorial input, output or bi-
directional I/O pin with 3-state control. The signal levels
are TTL compatible voltages and the output drivers can
source 4 mA or sink 8 mA. Each output can be pro-
grammed independently for fast or slow output slew rate
to minimize overall output switching noise. By connecting
the VCCIO pins to a common 5V or 3.3V power supply,
I/O output levels can be matched to 5V or 3.3V compat-
ible voltages. When connected to a 5V supply, the I/O
pins provide PCI-compatible output drive (48-pin device
only).
Eight GLBs, 32 I/O cells, two dedicated inputs and two
ORPs are connected together to make a Megablock (see
Figure 1). The outputs of the eight GLBs are connected
to a set of 32 universal I/O cells by the ORP. Each ispLSI
2032E device contains one Megablock.
The GRP has as its inputs, the outputs from all of the
GLBs and all of the inputs from the bi-directional I/O cells.
All of these signals are made available to the inputs of the
GLBs. Delays through the GRP have been equalized to
minimize timing skew.
Clocks in the ispLSI 2032E device are selected using the
dedicated clock pins. Three dedicated clock pins (Y0, Y1,
Y2) or an asynchronous clock can be selected on a GLB
basis. The asynchronous or Product Term clock can be
generated in any GLB for its own clock.
Programmable Open-Drain Outputs
In addition to the standard output configuration, the
outputs of the ispLSI 2032E are individually program-
mable, either as a standard totem-pole output or an
open-drain output. The totem-pole output drives the
specified Voh and Vol levels, whereas the open-drain
output drives only the specified Vol. The Voh level on the
open-drain output depends on the external loading and
pull-up. This output configuration is controlled by a pro-
grammable fuse. The default configuration when the
device is in bulk erased state is totem-pole configuration.
The open-drain/totem-pole option is selectable through
the ispDesignEXPERT software tools.
2



Part Number 2032E
Description In-SystemProgrammableSuperFASTHighDensityPLD
Maker LatticeSemiconductor - LatticeSemiconductor
Total Page 14 Pages
PDF Download
2032E pdf
Download PDF File
2032E pdf
View for Mobile




Featured Datasheets

Part Number Description Manufacturers PDF
2030PLS STD2030PLS 2030PLS
SamHop Microelectronics
PDF
2031 (203x) 3 DB Hybrid Couplers 2031
M/A-COM
PDF
20319-030T-11 Board to Cable Connector 20319-030T-11
I-Pexco
PDF
20319-040T-11 Board to Cable Connector 20319-040T-11
I-Pexco
PDF
20319-050T-11 Board to Cable Connector 20319-050T-11
I-Pexco
PDF
20319-0xx (203xx-xx) Board to Cable Connector 20319-0xx
I-Pexco
PDF


Part Number Start With

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

site map

webmaste! click here

contact us

Buy Components