http://www.Datasheet4U.com


SB10H150CT-1 Datasheet
Dual Common-Cathode High-Voltage Schottky Rectifier

No Preview Available !

SB10H150CT-1 pdf
Download PDF File

MBR10H150CT, MBRF10H150CT, SB10H150CT-1
www.vishay.com
Vishay General Semiconductor
Dual Common-Cathode High-Voltage Schottky Rectifier
Low Leakage Current 5.0 μA
TO-220AB
ITO-220AB
123
MBR10H150CT
123
MBRF10H150CT
TO-262AA
FEATURES
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Solder dip 275 °C max.10 s, per JESD 22-B106
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency inverters, freewheeling, and
polarity protection application.
123
SB10H150CT-1
PIN 1
PIN 3
PIN 2
CASE
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
VF
TJ max.
2x5A
150 V
160 A
0.72 V
175 °C
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-262AA
Molding compound meets UL 94V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current (Fig.1)
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load per diode
Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz
Peak non-repetitive reverse surge energy per diode (8/20 waveform)
Non-repetitve avalanche energy per diode at 25 °C, IAS = 1.5 A, L = 10 mH
Voltage rate of change (rated VR)
Operating junction and storage temperature range
Isolation voltage (ITO-220AB only) from terminals to heatsink t = 1 min
SYMBOL
VRRM
VRWM
VDC
IF(AV)
IFSM
IRRM
ERSM
EAS
dV/dt
TJ, TSTG
VAC
MBR10H150CT
150
150
150
10
5
160
1.0
10
11.25
10 000
- 65 to + 175
1500
UNIT
V
V
V
A
A
A
mJ
mJ
V/μs
°C
V
Revision: 21-Nov-12
1 Document Number: 88779
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SB10H150CT-1 Datasheet
Dual Common-Cathode High-Voltage Schottky Rectifier

No Preview Available !

SB10H150CT-1 pdf
Download PDF File

MBR10H150CT, MBRF10H150CT, SB10H150CT-1
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TYP.
Maximum instantaneous forward voltage
per diode
VF (1)
Maximum reverse current per diode at
working peak reverse voltage
IR (2)
IF = 5 A
IF = 5 A
IF = 10 A
IF = 10 A
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
0.88
0.72
0.96
0.80
5.0
1.0
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
MAX.
-
-
-
-
-
-
UNIT
V
μA
mA
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR
MBRF
Typical thermal resistance per diode
RJC
2.4
4.5
MBRB
2.4
UNIT
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
TO-220AB
MBR10H150CT-E3/45
2.06
ITO-220AB MBRF10H150CT-E3/45
2.20
TO-262AA
SB10H150CT-E3/45
1.58
PACKAGE CODE
45
45
45
BASE QUANTITY
50/tube
50/tube
50/tube
DELIVERY MODE
Tube
Tube
Tube
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
12
MBR, MBRB
10
MBRF
8
6
4
2
0
25 50 75 100 125 150 175
Case Temperature (°C)
Fig. 1 - Forward Derating Curve (Total)
200
180
160
140
120
100
80
60
40
20
0
1
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
10
Number of Cycles at 60 Hz
100
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
Revision: 21-Nov-12
2 Document Number: 88779
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SB10H150CT-1 Datasheet
Dual Common-Cathode High-Voltage Schottky Rectifier

No Preview Available !

SB10H150CT-1 pdf
Download PDF File

MBR10H150CT, MBRF10H150CT, SB10H150CT-1
www.vishay.com
Vishay General Semiconductor
100
TJ = 175 °C
10
TJ = 125 °C
1
TJ = 75 °C
TJ = 25 °C
0.1
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
10 000
1000
100
TJ = 175 °C
TJ = 125 °C
10
TJ = 75 °C
1
0.1 TJ = 25 °C
0.01
10 20 30 40 50 60 70 80 90 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics Per Diode
10 000
1000
100
10
0.1
1 10
Reverse Voltage (V)
100
Fig. 5 - Typical Junction Capacitance Per Diode
100
10
MBRF
MBR, MBRB
1
0.1
0.01
0.1 1
10
t - Pulse Duration (s)
100
Fig. 6 - Typical Transient Thermal Impedance Per Diode
Revision: 21-Nov-12
3 Document Number: 88779
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SB10H150CT-1 Datasheet
Dual Common-Cathode High-Voltage Schottky Rectifier

No Preview Available !

SB10H150CT-1 pdf
Download PDF File

MBR10H150CT, MBRF10H150CT, SB10H150CT-1
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.398 (10.10)
0.055 (1.40) 0.382 (9.70)
0.047 (1.20) 0.343 (8.70)
TYP.
0.150 (3.80)
0.139 (3.54)
DIA.
0.114 (2.90)
0.106 (2.70)
0.067 (1.70)
TYP.
0.118 (3.00)
TYP.
0.331(8.40)
TYP.
PIN
123
0.634 (16.10)
0.618 (15.70)
0.154 (3.90)
0.138 (3.50)
0.370 (9.40)
0.354 (9.00)
1.161 (29.48)
1.106 (28.08)
0.523 (13.28)
0.507 (12.88)
0.035 (0.90)
0.028 (0.70)
0.100 (2.54)
TYP.
0.064 (1.62)
0.056 (1.42)
0.200 (5.08) TYP.
0.024 (0.60)
0.018 (0.45)
0.185 (4.70)
0.169 (4.30)
0.055 (1.40)
0.049 (1.25)
0.638 (16.20)
0.598 (15.20)
0.102 (2.60)
0.087 (2.20)
ITO-220AB
0.408 (10.36)
0.392 (9.96)
1.29 (3.28)DIA.
1.21 (3.08)
0.138 (3.50)
0.122 (3.10)
0.270 (6.88)
0.255 (6.48)
0.630 (16.00)
0.614 (15.60)
PIN
123
0.264 (6.70)
0.248 (6.50)
0.320 (8.12)
0.304 (7.72)
0.396 (10.05)
0.372 (9.45)
0.039 (1.00)
0.024 (0.60)
0.100
(2.54) TYP.
0.058 (1.47)
MAX.
0.200 (5.08)
TYP.
0.024 (0.60)
0.018 (0.45)
0.193 (4.90)
0.177 (4.50)
0.108 (2.74)
0.092 (2.34)
0.633 (16.07)
0.601 (15.67)
0.117 (2.96)
0.101 (2.56)
TO-262AA
0.398 (10.10)
0.382 (9.70)
0.055 (1.40)
0.039 (1.00)
K
0.185 (4.70)
0.169 (4.30)
0.055 (1.40)
0.049 (1.25)
PIN
123
0.488 (12.4)
0.472 (12.00)
0.035 (0.90)
0.028 (0.70)
0.405 (10.28)
0.389 (9.88)
0.370 (9.40)
0.354 (9.00)
0.425 (10.80)
0.393 (10.00)
0.523 (13.28)
0.507 (12.88)
0.102 (2.60)
0.087 (2.20)
0.100
(2.54) TYP.
0.062 (1.57)
0.054 (1.37)
0.200 (5.08) TYP.
0.024 (0.60)
0.018 (0.45)
Revision: 21-Nov-12
4 Document Number: 88779
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SB10H150CT-1 Datasheet
Dual Common-Cathode High-Voltage Schottky Rectifier

No Preview Available !

SB10H150CT-1 pdf
Download PDF File

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000


SB10H150CT-1 datasheets pdf
Total : 5 Pages
Download Full PDF File