http://www.Datasheet4U.com


FX2-100P-1.27SVL Datasheet
1.27mm Pitch Multi-function Two Piece Connector

No Preview Available !

FX2-100P-1.27SVL pdf
Download PDF File

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
1.27mm Pitch Multi-function Two Piece Connector
FX2 Series
Stacking connection (Stack height: 12~16mm)
12mm~16mm
Horizontal Connection
25mm
Vertical Connection
Features
1. Various connection with various product line
Stacking connection
Vertical type
Cable connection
Through hole type SMT type Through hole type SMT type
2. Easy One-Touch Operation
The ribbon cable connection type allows easy one-touch operation
with either single hand.
Insersion and Extraction
(1) Pick internal locks with thumb and the index finger.
Through hole type SMT type
Cable only
Through hole type
Horizontal type
SMT type
Vertical type
Through hole type SMT type
(2) With unique and preferable click feeling, the cable and
connector can be inserted or withdrawed.
Cable only
Cable connection
(For insertion, the operation proceeds from procedure (2) to (1).)
A85

FX2-100P-1.27SVL Datasheet
1.27mm Pitch Multi-function Two Piece Connector

No Preview Available !

FX2-100P-1.27SVL pdf
Download PDF File

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHFS Xpr2odSucetsriheasveb1ee.n2d7ismcomntinPueitdc, ohr wMillubletid-isfuconntcintuieodnsoTonw. PoleaPseieccheeckCthoenpnroedcucttosrstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3. Board to board type
q Flux swell prevention
The straight through hole type takes the complete flux
tight action from the board back side at solder dipping.
The type is prepared, corresponding to whether or not
cleaning is required.
w Stack height 12mm to 16mm
The board stack height can be set to every 1 mm unit up
to 12 to 16mm.
e Mis-insertion preventive mechanism
The mating area is designed in a mechanism so as to
prevent mis-insertion, and complete countermeasures
have been taken against wrenching.
Applications
Computers, peripheral equipments, various machines etc.
Product Specifications
4. Board to cable type
q Complete lock with easy operation
Employing the inner lock system, complete lock and eject
actions can be performed with easy operation.
w Applicable cable
The applicable cable is the <UL2651>AWG#28 flat cable
(7/0.127mm), and the jacket size is 0.9±0.1mm.
5. SMT type
Strength security with metaltab
The right angle type is equipped with metaltab to secure
soldering strength, and constructed so as to fix by
screws. The straight type can choose whether or not
metaltab are required.
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating 125V AC Operating Humidity Range 40 to 80%
Storage Humidity Range 40 to 70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min
250V DC
2. Withstanding Voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance 45m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 55m ohms max.
Insulation resistance: 100M ohms min.
No damage, cracks, or parts looseness.
(-55ç: 30 minutes15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes15 to 35ç: 2 to 3 minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 55 m ohms max.
500 cycles
Reflow: At the recommended temperature profile
SMT Type
Manual soldering: 360ç for 5 seconds
8. Resistance to soldering heat No deformation of components affecting performance.
Solder bath: 260ç for 10 seconds
DIP Type
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
Material
Insulator
Parts
Dip type
Socket
SMT type
Material
Polyamid
PBT/Polyamid
PPS
Finish
Black
Light brown
Remark
UL94V-0
Contact
Receptacle
Socket
Phosphor bronze
Selective gold plated
________
Header
Phosphor bronze or brass
Stacking Variation
Header
Dip type
SMT type
Unit:mm
Receptacle
Dip type
SMT type
FX2C-*S-1.27DSA(L) FX2C2-*S-1.27DSA(L) FX2-*S-1.27SV(L)
FX2CA-*S-1.27DSA(L) FX2CA2-*S-1.27DSA(L)
FX2C-*P-1.27DSA(L)
FX2CA-*P-1.27DSA(L)
12.0
14.0
12.2
FX2CA1-*P-1.27DSA(L)
13.0
15.0
13.2
FX2CA2-*P-1.27DSA(L)
FX2-*P-1.27SV(L)
14.0
12.1
16.0
14.1
14.2
12.3
A86

FX2-100P-1.27SVL Datasheet
1.27mm Pitch Multi-function Two Piece Connector

No Preview Available !

FX2-100P-1.27SVL pdf
Download PDF File

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HiroseFwXeb2sitSe eRorHieSssear1c.h2a7t mwwmw.hPiroitsce-hcoMnneuclttoir-sf.cuonmc, otrioconntTacwt yoouPr iHeircoeseCsaolensnreepcretsoenrtative.
Ordering Information
Board to Board Receptacle
FX2
q
CA 2 - * S - 1.27 DSA L
we
rt
y ui
q Series Name :FX2
w Blank: Right angle type
C : Straight non-cleaning type
CA : Straight cleaning type
e Product height variation (DSA only)
Blank : Standard product
2 : +2mm
r Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100, 120
t Connector type: S: Receptacle
y Contact pitch: 1.27mm
u Contact type
DS : Right angle type
DSA : Straight type
i L: Board prefixed pin
Board to Board Header
FX2 CA 1 - * P - 1.27 DSA L
q w e rt
y ui
q Series Name :FX2
r Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100, 120
w None : Right angle type
t Connector type: P: header
C : Straight non-cleaning type
y Contact pitch: 1.27mm
CA : Straight cleaning type
u Contact type:
e Product height variation (DSA only)
DS : Right angle type
Blank : Standard product
DSA : Straight type
1 : +1mm
i L: Board prefixed pin
2 : +2mm
Note 1. C and CA take complete countermeasures against flux.
Note 2. Cleaning type: the liquid escape hole is added at dip cleaning.
Note 3. No-cleaning type: no liquid escape hole is added at dip cleaning.
Board to Cable Socket
FX2 BA - * S A - 1.27 R
q w e rt y u
q Series Name : FX2
w B : Lock cable type
BA : No lock cable type
e Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100
r S: Socket
t A: Contact material: phosphor bronze
y Contact pitch: 1.27mm
u R: Insulation displacement
A87


FX2-100P-1.27SVL datasheets pdf
Total : 28 Pages
Download Full PDF File