http://www.Datasheet4U.com


Buy Electronic Components

MC06XSD200 Datasheet
Dual 6.0 mOhm High Side Switch

No Preview Available !

MC06XSD200 pdf
Download PDF File

Freescale Semiconductor
Advance Information
Document Number: MC06XSD200
Rev. 2.0, 9/2013
Dual 6.0 mOhm High Side Switch
The 06XSD200 device is part of a 36 V dual high side switch product
family with integrated control and a high number of protective and
diagnostic functions. It has been designed for industrial applications.
The low RDS(ON) channels (<6.0 m) can control different load types;
bulbs, solenoids, or DC motors. Control, device configuration, and
diagnostics are performed through a 16-bit serial peripheral interface
(SPI), allowing easy integration into existing applications.
Both channels can be controlled individually by external/internal
clock-signals or by direct inputs. Using the internal clock allows fully
autonomous device operation. Programmable output voltage slew
rates (individually programmable) help improve EMC performance. To
avoid shutting off the device during inrush current, while still being able
to closely track the load current, a dynamic overcurrent threshold
profile is featured. Switching current of each channel can be sensed
with a programmable sensing ratio. Whenever communication with the
external microcontroller is lost, the device enters a fail-safe operation
mode, but remains operational, controllable, and protected.
This device is powered by SMARTMOS technology.
Features
• Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V,
3.3 V and 5.0 V compatible 16-bit SPI port for device control,
configuration, and diagnostics at rates up to 8.0 MHz
• Two fully-protected 6.0 m(@ 25 °C) high side switches
• Up to 9.0 A steady-state current per channel
• Separate bulb and DC motor latched overcurrent handling
• Parallel output operating mode with improved switching
synchronization
• Individually programmable internal/external PWM clock signals
(switching frequency, duty cycle, slew rate, switch-on time-shift)
• Overcurrent, short-circuit, and overtemperature protection with
programmable auto-retry functions
• Accurate temperature and current sensing (high/low sensing
ratios/offset compensation)
• OpenLoad detection (channel in OFF and ON state), also for LED
applications (7.0 mA typ.)
06XSD200
HIGH SIDE SWITCH
FK SUFFIX (PB-FREE)
98ASA00428D
23 PIN PQFN (12 X12 mm)
ORDERING INFORMATION
Device
Temperature
Range (TA)
Package
MC06XSD200FK
-40 to 125 °C
23 PQFN
VDD
I/O
I/O
SCLK
CSB
SI
MCU I/O
SO
I/O
I/O
GND
I/O
A/D
A/D
VDD
VPWR
06XSD200
VDD VPWR
CLOCK
FSB
SCLK
CSB
SO
RSTB
SI
IN0
IN1
HS0
HS1
CONF0
CONF1
FSOB
SYNC
CSNS
GND
LOAD
M LOAD
Figure 1. Simplified Application Diagram
*This document contains certain information on a product under development.
Freescale reserves the right to change or discontinue this product without notice
© Freescale Semiconductor, Inc., 2013. All rights reserved.
Free Datasheet http://www.datasheet4u.com/

MC06XSD200 datasheets pdf
Total : 30 Pages
Download Full PDF File