Voltage Regullators

Preliminary ◆Input Voltage Range : 2.0V~25.0V ◆Output Voltage Range : 2.0V~12.0V (XC6216B/XE6216B) 2.0V~23.0V (XC6216C/XE6216C) 2.0v~12.0V (XC6216D/XE6216D) ◆Output Current : 150mA~(VOUT(T)≧3.0V) : 100mA~(VOUT(T)<3.0V) (VIN=VOUT(T)+3.0V) ◆Current Limit Circuit Built-In ◆Thermal Shutdown Circuit Built-In ◆Ceramic Capacitor Compatible * XC6216B and C types are preliminary. ■APPLICATIONS ●Car audio, Car navigation systems ●Note book computers, PDAs ●Home appliances ●AV equipment (Cameras, VCRs, etc.) ●Wireless communication equipment (Cordless phones, etc.) ■GENERAL DESCRIPTION XC6216/XE6216 series are highly precise, low noise, positive regulator ICs. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and www.DataSheet4U.com a phase compensation circuit plus a driver transistor. The output voltage is selectable in 100mV increments within the range of 2.0V to 12V using laser trimming technologies (XC6216B/XE6216B series). Furthermore, with external resistors, the output voltage can be set from 2.0V to 23V (XC6216C/XE6216E series). The series’ output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption. ■FEATURES Maximum Output Current Dropout Voltage Input Voltage Range Output Voltage Setting Range High Accuracy Low Power Consumption Stand-by Current High Ripple Rejection Operating Temperature Range External Capacitor : More than 150mA (Up to 200mA) (VIN=VOUT(T)+3.0V) : 300mV@IOUT=20mA : 2.0V~25.0V : 2.0V~12.0V (100mV increments) (With external resistors: 2.0V~23.0V) : Setting Voltage Accuracy±2% (Setting Voltage Accuracy±1% Possible) : 5μA : Less than 0.1μA : 40dB@1kHz : -40℃~+85℃ : 0.1uF~1.0uF capacitor recommended (Internal phase compensation) Packages : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252 * XE series is the series corresponding to automotive applications, and is assuring all temperature between – 40℃ to +85 ℃. ■ TYPICAL APPLICATION CIRCUITS ●XC6216B/XE6216B Series (Fixed Output Voltage) V IN V OUT ●XC6216C/XE6216CSeries (Output Voltage Externally Set) VIN V OUT R21 CIN 1uF CE V SS CL 1uF CIN 1uF CE V SS V OFB R22 CL 1uF XC6216_XE6216 ETR0321_004 1/12 XC6216/XE6216 Series ■PIN CONFIGURATION * The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (PIN # 5). ■PIN ASSIGNMENT ●XC6216B/XE6216B Series (Preliminary) SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 5 2 4 3 1 USP-6C 6 5 4 3 1 2 PIN NAME VIN VSS NC CE VOUT NC FUNCTIONS Power Input Ground No connection ON/OFF Control Output No connection ●XC6216C/XE6216C Series (Preliminary) SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 5 2 4 3 1 USP-6C 6 5 4 3 1 2 PIN NAME VIN VSS VOFB CE VOUT NC FUNCTIONS Power Input Ground Output Voltage Adjustment ON/OFF Control Output No connection ●XC6216D Series SOT-89 3 2 1 PIN NUMBER SOT-223 3 2 1 TO-252 1 2 3 PIN NAME VIN VSS VOUT FUNCTIONS Power Input Ground Output 2/12 XC6216/XE6216 Series ■ PRODUCT CLASSIFICATION ●Ordering Information XC6216①②③④⑤⑥ DESIGNATOR ① DESCRIPTION Type and Options of Regulators SYMBOL B C D 20 ~ 99 Output Voltage A, B, C DESCRIPTION : Fixed output voltage, High Active : Output voltage externally set, High Active : Fixed output voltage, No CE function : For the voltage within 2.0V ~9.9V; e.g. 2.5V ⇒ 25 5.0V ⇒ 5. : For the voltage above 10.0V; e.g. 10.6V ⇒ A6 11.2V ⇒ B2 12.0V ⇒ C0 : For C type (output voltage externally set), VOFB=2.0V only : Output voltage 100mV increments, Within ±2% accuracy e.g. 2.5V ⇒ ②=2, ③=5, ④=2 : Output voltage 100mV increments, Within ±1% accuracy e.g. 5.0V ⇒ ②=5, ③=0, ④=1 : SOT-25 ( for B and C types only) : SOT-89 (for D type only) : SOT-89-5 (for B and C types only) : USP-6C (for B and C types only) : SOT-223 (for D type only) : TO-252 (for D type only) : Embossed tape, standard feed : Embossed tape, reverse feed ②③ 20 Output Voltage Accuracy 2 1 M P P E F J R L ④ ⑤ Package ⑥ Device Orientation XE6216①②③④⑤⑥ DESIGNATOR ① DESCRIPTION Type and Options of Regulators SYMBOL B C 20 ~ 99 Output Voltage A, B, C DESCRIPTION : Fixed output voltage, High Active : Output voltage externally set, High Active : For the voltage within 2.0V ~9.9V; e.g. 2.5V ⇒ 25 5.0V ⇒ 5. : For the voltage above 10.0V; e.g. 10.6V ⇒ A6 11.2V ⇒ B2 12.0V ⇒ C0 : For C type (output voltage externally set), VOFB=2.0V only : Output voltage 100mV increments, Within ±2% accuracy e.g. 2.5V ⇒ ②=2, ③=5, ④=2 : Output voltage 100mV increments, Within ±1% accuracy e.g. 5.0V ⇒ ②=5, ③=0, ④=1 : SOT-25 ( for B and C types only) : SOT-89 (for D type only) : SOT-89-5 (for B and C types only) : USP-6C (for B and C types only) : Embossed tape, standard feed : Embossed tape, reverse feed ②③ 20 Output Voltage Accuracy 2 1 M P P E R L ④ ⑤ Package ⑥ Device Orientation *1: The B and c types are preliminary. *2: The XE products are preliminary. 3/12 XC6216/XE6216 Series ■PACKAGING INFORMATION ●SOT-25 ●SOT-89-5 4.5±0.1 1.6 + 0 .1 5 - 0 .2 2.9±0 .2 0.4 +0.1 -0.05 0.42±0.06 0.42±0.06 0.42±0.06 1.0±0.2 0.4 - 0 .0 2 + 0 .0 3 5 (0.4) 2 4 5 4 0 .0 5±0 .0 5 2 .8±0 .2 +0.2 -0.1 Φ1.0 4.25±0.25 2.5±0.1 MIN 0 .2 1 (0 .9 5 ) 2 1 .9±0 .2 3 0 .1 5 -0.05 +0.1 1 .6 1 0.42±0.06 1 .1 5±0.1 5 1 .1 ±0.1 2 0.47±0.06 3 1.0±0.2 5° 5° 0.42±0.06 0.4 - 0 .0 2 + 0 .0 3 8 ° 8 ° (0.1) 1.5±0.1 1.5±0.1 ●USP-6C ●SOT-89 4/12 1.5±0.1 XC6216/XE6216 Series ■PACKAGING INFORMATION (Continued) ●SOT-223 . ●TO-252 6. 55±0. 2 5 3±0. 2 . 1. 1±0. 25 0. 5 ±0 1 . 6. 1 ±0. 15 0. 75±0. 15 0. 75±0. 15 0. 75±0. 15 0. 85±0 25 . . 9. 9±0. 55 0. 5 ±0 1 . 0. 2. 3 + 1 - 1 0. 5 M I N . 32 4 . （2. 28） （2. 28） 5/12 XC6216/XE6216 Series ■ BLOCK DIAGRAMS ●XC6216B/XE6216B Series (SOT-25, SOT-89-5, USP-6C) ●XC6216C/XE6216C Series (SOT-25, SOT-89-5, USP-6C) V IN ON/OFF Control + Error A mp Thermal Protection Current Limit V IN V OUT ON/OFF Control + Error A mp Thermal Protection Current Limit V OUT CE V oltage Ref erence CE R11 R12 V SS V OFB V oltage Ref erence R11 R12 V SS ●XC6216D Series (SOT-89, SOT-223, TO-252) V IN + Error A mp Thermal Protection Current Limit V OUT V oltage Ref erence V SS R11 R12 ■ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage FB Voltage SOT-25 SOT-89 SOT-89-5 Power Dissipation USP-6C SOT-223 TO-252 Operating Temperature Range Storage Temperature Range *1: IOUT≦Pd / (VIN-VOUT) *2: When mounting on glass epoxy. Mounting board area: 1600mm (40mm×40mm) Copper plate area: 800mm 2 2 SYMBOL VIN IOUT VOUT VCE VOFB Pd Topr Tstg RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 VSS-0.3~VIN+0.3 VSS-0.3～30 250 500 500 100 (1100 *2) 300 (1900 *2) T.B.D. (*3) -40~+85 -55~+125 UNIT V mA V V V mW (TJ=25℃) ℃ ℃ 6/12 XC6216/XE6216 Series ■ELECTRICAL CHARACTERISTICS ●XC6216B Series Ta = 25℃ PARAMETER Output Voltage Maximum Output Current Load Regulation △VOUT Vdif1 Vdif2 ISS Istby △VOUT / Line Regulation 1 △VIN・VOUT(T) △VOUT / Line Regulation 2 △VIN・VOUT(T) Input Voltage VIN Output Voltage △VOUT / Temperature Characteristics △Topr・VOUT(T) Ripple Rejection Rate Short Current CE ”H” Level Voltage CE ”L” Level Voltage CE ”H” Level Current CE ”L” Level Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Range NOTE: *1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1 {Note 5} SYMBOL VOUT(E) IOUTMAX CONDITIONS IOUT=20mA, VCE=VIN VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T)≧3V) VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T)＜3V) VIN=VOUT(T)+2.0V 1mA≦IOUT≦100mA VCE=VIN IOUT=20mA, VCE=VIN IOUT=100mA, VCE=VIN VCE=VIN VCE=VSS VOUT(T)+2.0V≦VIN≦25.0V IOUT=5mA, VCE=VIN VOUT(T)+2.0V≦VIN≦25.0V IOUT=13mA, VCE=VIN IOUT=20mA, VCE=VIN -40℃≦Topr≦85℃ VIN=[VOUT(T)+2.0]V+0.5Vp-pAC IOUT=20mA, f=1kHz, VCE=VIN VIN=VOUT(T)+2.0V, VCE=VIN MIN. х0.98 150 100 0.01 0.03 2.0 1.0 0 -0.1 -0.1 - TYP. VOUT(T) 40 300 1000 5 0.01 0.05 0.15 ±100 40 30 150 125 25 MAX. х1.02 0.10 0.10 0.30 25.0 VIN 0.5 0.1 0.1 - UNIT V mA mA mV mV mV uA uA %/V %/V V ppm/℃ dB mA V V uA uA CIRCUIT ① ① ① ① ① ① ② ② ① ① ① ③ ① ① ① ① ① Dropout Voltage 1 Dropout Voltage 2 Supply Current Stand-by Current PSRR Ishort VCEH VCEL ICEH ICEL TTSD TTSR TTSD-TTSR VIN=VCE=25.0V VIN=25.0V, VCE=VSS Junction Temperature Junction Temperature ℃ ℃ ℃ - - VOUT1 {Note 4} } *4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input. *5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V. 7/12 XC6216/XE6216 Series ●XC6216C Series PARAMETER Output Voltage Divided Resistor Maximum Output Current Load Regulation Dropout Voltage1 Dropout Voltage2 Supply Current Stand-by Current Line Regulation1 SYMBOL VOUT(E) RFB IOUTMAX △VOUT Vdif1 Vdif2 ISS Istby △VOUT / △VIN・VOUT(T) △VOUT / △VIN・VOUT(T) CONDITIONS IOUT=20mA, VCE=VIN, VOFB=VOUT VIN=VOUT=5.0V, VCE=VSS VOFB=VOUT VIN=VOUT(T)+3.0V, VCE=VIN , VOFB=VO