LCD

www.DataSheet4U.com SPECIFICATION 3-Nov-2005 OF LIQUID CRYSTAL DISPLAY MODULE CUSTOMER : U.R.T. STANDARD UMSH-7511MD-5T 0 6 Model No. : Model version : Document Revision : CUSTOMER APPROVED SIGNATURE U.R.T. UNITED RADIANT TECHNOLOGY CORP. This specification need to be signed by purchaser or customer as a specification of products production and delivery from URT. Without signature of this specification , any purchase order for this model no. will be treated and considered that this specification is automatically acknowledged and accepted by purchaser or customer. Rex Li APPROVED Kelly Tseng CHECKED I-Feng Wu PREPARED 3-Nov-2005 Date COMPANY : No. 2,Fu-hsing Road,Taichung Econamic Processing Zone,Tantzu,Taichung,Taiwan,R.O.C. TEL: 886-4-25314277 FAX: 886-4-25313067 SALES OFFICE : 2F,No.19,Lane 768,Pa The Road Sec.4,Taipei,Taiwan,R.O.C. TEL: 886-2-27850792 FAX: 886-2-27850797 U.R.T. Page: 1 www.DataSheet4U.com Document Revision 0 Model No. Version No. UMSH-7511MD-T (UFSH-E880EY-FT) Version No. 0 UMSH-7511MD-1T (UFSH-E880EY-FT) Version No. 0 UMSH-7511MD-2T (UFSH-E880EY-FT) Version No. 0 UMSH-7511MD-2T (UFSH-E880EY-FT) Version No. 0 UMSH-7511MD-3T (UFSH-E880EY-FT) Version No. 0 UMSH-7511MD-4T (UFSH-E880EY-FT) Version No. 0 UMSH-7511MD-5T (UFSH-E880EY-1FT) Version No. 0 Description Revision by Lingling Chen 20-Aug-2004 1 2 1. Change IC number HD66773R to HX8303APD4. 2. Change module number from UMSH-7511MD-T to UMSH-7511MD-1T. 1. Change IC number HX8303APD4 to NT3911. 2. Change module number from UMSH-7511MD1T Modify back-light specification. Lingling Chen 15-Oct-2004 Lingling Chen 15-Oct-2004 Alex Fang 6-Dec-2004 3 4 1. This product conform with the standard of Rohs (HD66773R). Alex Fang Jeason Wang 2-Aug-2005 5 1. This product conform with the standard of Rohs (NT 3911). Alex Fang Jeason Wang 2-Aug-2005 6 1.Improve the view angel. 2.Modify the module number from UMSH-7511MD-3T to UMSH-7511MD-5T. Alex Fang Jeason Wang 3-Nov-2005 U.R.T. Page: 2 www.DataSheet4U.com CONTENTS: No. Item BASIC SPECIFICATION 1.1 Mechanical Specification 1.3 Outline Dimension 1.4 Block Diagram 1.5 Interface Pin ELECTRICAL CHARACTERISTICS Page 2.2.1 Backlight Specification 2.3 AC Characteristics OPTICAL CHARACTERISTICS 3.2 Definition of Optical Characteristics 10~13 15~16 RELIABILITY HANDING PRECAUTION DATECODE 19 PACKING & LOTNO 20~21 INSPECTION STANDARD 22~25 U.R.T. Page: 3 www.DataSheet4U.com 1. BASIC SPECIFICATION 1.1 Mechanical specifications Items Dot Matrix Module Size (W x H x T) Viewing Area (W x H) Active Area (W x H) Dot Size (W x H) Dot Pitch (W x H) Driving method Nominal Dimension 128 x RGB x 160(TFT) 34.0 x 47.0 x 2.8 30.0 x 38.43 28.412 x 35.512 0.218 x 0.214 0.222 x 0.222 1 1 Driving IC Package COG Unit dots mm. mm. mm. mm. mm. Duty Bias 1.2 Display specification Display LCD Type LCD Mode Polarizer Mode Polarizer UV-Cutting Polarizer Surface Background Color Backlight Type Backlight Color Viewing Direction Descriptions TFT Negative Transmissive White LED White 6 O'clock Direction Note U.R.T. Page: 4 www.DataSheet4U.com 1.3 Outline dimension U.R.T. Page: 5 www.DataSheet4U.com 1.4 Block diagram: 160 128 x RGB x 160 Dots 65K Color 384 U.R.T. Page: 6 www.DataSheet4U.com 1.5 Interface pin : U.R.T. Page: 7 www.DataSheet4U.com 2. ELECTRICAL CHARACTERISTICS 2. U.R.T. Page: 8 www.DataSheet4U.com 2.2 DC Characteristics 2.2.1 Back-light Specification : Data About LED Backlight U.R.T. Page: 9 www.DataSheet4U.com U.R.T. Page: 10 www.DataSheet4U.com U.R.T. Page: 11 www.DataSheet4U.com U.R.T. Page: 12 www.DataSheet4U.com U.R.T. Page: 13 www.DataSheet4U.com 3. OPTICAL CHARACTERISTICS 3.1 Characteristics Electrical and Optical Characteristics No. Item Response Time Viewing Angle Red x-code Red y-code Green x-code Green y-code Blue x-code Blue y-code White x-code White y-code Front-Rear Left-Right symbol / temp. Tr Tf 1 2 Cr Rx Ry Gx Gy Bx By Wx Wy 5 270° Min. -15 45 150 Typ. 15 35 200 0.55 Max. 35 45 4 degree 3 Unit ms Note 2 Contrast Ratio U.R.T. Page: 14 www.DataSheet4U.com 3.2 Definition of optical characteristics Measurement condition : [Note 1] Definition of LCD Driving Vop and Waveform : [Note 2] Definition of Response Time [Note 3] Definition of Viewing Angle : [Note 4] Definition of Contrast Ratio : U.R.T. Page: www.DataSheet4U.com [Note 5] Definition of measurement of Color Chromaticity and Brightness BM-7 LCD Module [Note 6] Definition of Brightness Uniformity W/4 Active Area Height : H H/4 1 480mm 2 3 4 5 6 Minimum Brightness of Point 1~9 Brightness Uniformity = Maximum Brightness of Point 1~9 7 8 9 Active Area Width : W [Note 7] Definition of Measurement of Reflectance BM-7 White Light Source (Ring) 480mm 15 deg. LCD Module or referance U.R.T. Page: 16 www.DataSheet4U.com 4. RELIABILITY : Item No 1 2 3 4 5 6 Items High temperature operating Low temperature operating High temperature storage Low temperature storage High temperature & humidity storage Thermal Shock storage Vibration test 70 -20 80 -30 Condition , 200 hours , 200 hours , 200 hours , 200 hours Remark Finish product (With polarizer) Finish product (With polarizer) Finish product (With polarizer) Finish product (With polarizer) Finish product (With polarizer) -30 , 30min.<=> 80 , 30min. 10 Cycles 10 => 55 =>10 => 55 => 10 Hz , within 1 minute Amplitude : 1.5mm. 15 minutes for each Direction ( X,Y,Z ) Packed, 100CM free fall, 6 sides, 1 corner, 3edges 50,000 hours 25 , 70%RH below , Finish product (With polarizer) Finish product (With polarizer) Finish product (With polarizer) Finish product (With polarizer) 7 8 Drop test Life time * One single product test for only one item. * Judgment after test : keep in room temperature for more than 2 hours. - Current consumption < 2 times of initial value - Contrast > 1/2 initial value - Function : work normally U.R.T. Page: 17 www.DataSheet4U.com 5. HANDLING PRECAUTION PRECAUTION FOR HANDLING LCM The LCD module contains a C-MOS LSI. To avoid damage tom the LSI from static electricity generated while working,Ground your body, work/assembly areas and assembly equipment to protect the module against STATIC ELECTRICITY. Do not input any signal before power is turned on. Do not take LCM from it’s packaging bag unit it is assembled. Peel off take LCM protective film slowly since static electricity may be generated. Pay attention to the humidity of the work shop, 50~60%RH is satisfactory. Use a non-leak iron for soldering LCM. Do not touch the display surface or connection terminals area with bare hands.Smudges on the display surface reduce the insulation between terminals. Cautions for soldering to LCM: Condition for soldering I/O terminals: Temperature at iron tip :280 Soldering time : 3~4sec./ terminals. Type of solder : Eutectic solder(rosin flux filled). PRECAUTION IN USE OF LCD Do not contact or scratch the front surface and the contact pads of ac LCD panel with hard. materials such as metal or glass or with one’s nail. To clean the surface , wipe it gently with soft cloth dampened alcohol. Do not attempt to wiped off the contact pads. Keep LCD panels away from direct sunlight , also avoid them in high-temperature & high humidity environment for a long period. Do not drive LCD panels by DC voltage. Do not expose LCD panels to organic solvent. Liquid in LCD is hazardous substance , any contacts with liquid crystal materials , wash it off immediately with soap and water. The polarizer is easily damaged and should be handle with special care. Don’t press or rub it with hard objects. PRECAUTION FOR STORING LCM To avoid degradation of the device , do not store the module under the conditions of direct sunlight , high temperature or high humidity . Keep the module in bags designed to prevent static electricity charging under low temperature / normal humidity conditions(avoid high temperature / high humidity and low temperature below 0 ) U.R.T. Page: 18 www.DataSheet4U.com 6. DATE CODE OF PRODUCTS Date code will be shown on each product : Y MM DD - XXX Year Month Day - Production lots Example: 2 1 2 2 3 - 0 0 3 ==>Year 2002, Dec.,23rd , Batch no.03 U.R.T. Page: 19 www.DataSheet4U.com 7. PACKING Packing tray must be stacked with alternated direction to each others. To tacks packing trays in same direction will cause product damaged. U.R.T. Page: 20 www.DataSheet4U.com U.R.T. Page: 21 www.DataSheet4U.com 8. INSPECTION STANDARD 8.1. QUALITY : THE QUALITY OF GOODS SUPPLIED TO PURCHASER SHALL COME UP TO THE FOLLOWING STANDARD. 8.1.1. THE METHOD OF PRESERVING GOODS AFTER DELIVERY OF GOODS FROM U.R.T. TO PURCHASER. PURCHASER SHALL CONTROL THE LCM AT -10 40 ,AND IT MIGHT BE DESIRABLE TO KEEP AT THE NORMAL ROOM TEMPERATURE AND HUMIDITY UNTIL INCOMING INSPECTION OR THROWING INTO PROCESS LINE. 8.1.2. INCOMING INSPECTION (A) THE METHOD OF INSPECTION IF PURCHASER MAKE AN INCOMING INSPECTION , REGARDED AS ONE LOT. (B) THE STANDARD OF QUALITY ISO-2859-1 ( or MIL-STD-105D ) , LEVEL SINGLE PLAN. A SAMPLING PLAN SHALL BE APPLIED ON THE CONDITION THAT QUALITY OF ONE DELIVERY SHALL BE CLASS CRITICAL MAJOR MINOR TOTAL (C) MEASURE AQL(%) 0.4 % 0.65 % .5 % .5 % EVERY ITEM SHALL BE INSPECTED ACCORDING TO THE CLASS. IF AS THE RESULT OF ABOVE RECEIVING INSPECTION , A LOT OUT IS DISCOVERED. PURCHASER SHALL BE INFORM SELLER OF IT WITHIN SEVEN DAYS. BUT FIRST SHIPMENT WITHIN FOURTEEN DAYS. 8.1.3. WARRANTY POLICY U.R.T. WILL PROVIDE ONE-YEAR WARRANTY FOR THE PRODUCTS ONLY IF UNDER SPECIFICATION OPERATING CONDITIONS. 8.2. CHECKING CONDITION 8.2.1. CHECKING DIRECTION SHALL BE IN THE 45 DEGREE AREA TO FACE THE SAMPLE. 8.2.2. CHECKER SHALL SEE OVER 30 cm. WITH BARE EYES FAR FROM SAMPLE AND USING 2 PCS. OF 20W FLUORESCENT LAMP. U.R.T. Page: 22 www.DataSheet4U.com 8.3. INSPECTION PLAN : CLASS ITEM 1. OUTSIDE AND INSIDE PACKAGE JUDGEMENT "MODEL NO." , "LOT NO." AND "QUANTITY" SHOULD INDICA