(TS25P01G - TS25P07G) 25A Single-Phase Glass Passivated Bridge Rectifier

TS25P01G - 07G 25A Single-phase Glass-passivated Bridge Rectifier Voltage Range 50 to 1000 Volts FEATURES UL Recognized File # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 300 amperes peak High case dielectric strength of 2000 VRMS C .118(3.0) X45 0 1.193(30.3) 1.169(29.7) TS-6P .189(4.8) .173(4.4) .150(3.8) .134(3.4) .799(20.3) .776(19.7) .106(2.7) .091(2.3) .094(2.4) .079(2.0) .043(1.1) .035(0.9) .303 (7.7) .287 (7.3) .402(10.2) .386(9.8) .303 (7.7) .287 (7.3) .189(4.8) .441(11.2) .425(10.8) .134(3.4) .122(3.1) .114(2.9) .098(2.5) MECHANICAL DATA Case: Molded plastic Terminals: Leads solderable per MIL-STD-750, method 2026 Weight: 0.3 ounce, 8 grams Mounting torque: 8.17 in. lbs. max. .165(4.2) .150(3.8) .709(18.0) .669(17.0) .031(0.7) .024(0.6) Dimensions in inches and (millimeters) RoHS compliant. www.DataSheet4U.com Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol TS25P TS25P TS25P TS25P Parameter 01G 02G 03G 04G TS25P TS25P TS25P 05G 06G 07G Units V V V A A V uA uA °C/W °C °C Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @25A Maximum DC Reverse Current @ TA=25°C at Rated DC Blocking Voltage @ TA=125°C Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range VRRM VRMS VDC I(AV) IFSM VF IR RθJC TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 25.0 300 1.1 10.0 500 0.6 -55 to +150 -55 to + 150 Note: Thermal resistance from junction to case with device mounted on 5” x 7” x 0.25” Al-plate heatsink. 2/26/2005 Rev.1.01 www.SiliconStandard.com 1 of 2 TS25P01G - 07G RATINGS AND CHARACTERISTIC CURVES FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT. (A) 40 60 80 100 120 o 30 400 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 300 200 100 AVERAGE FORWARD CURRENT. (A) 25 20 15 10 5 0 20 140 160 180 20 1 1.5 2 3 4 5 6 7 8 9 10 15 20 25 30 40 60 80 100 CASE TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 10 FIG.4- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 1000 www.DataSheet4U.com INSTANTANEOUS FORWARD CURRENT. (A) 80 100 120 140 INSTANTANEOUS REVERSE CURRENT. ( A) Tj=125 0C 1 100 10 Tj=25 0C 0.1 1.0 0.01 0 20 40 60 0.1 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, express or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 2/26/2005 Rev.1.01 www.SiliconStandard.com 2 of 2