Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS

TLC226x, TLC226xA Advanced LinCMOS™ RAIL-TO-RAIL OPERATIONAL AMPLIFIERS SLOS177A – FEBRUARY 1997 – REVISED JULY 1999 D D D D D D Output Swing includes Both Supply Rails Low Noise . . . 12 nV/√Hz Typ at f = 1 kHz Low Input Bias Current . . . 1 pA Typ Fully Specified for Both Single-Supply and Split-Supply Operation Low Power . . . 500 µA Max Common-Mode Input Voltage Range Includes Negative Rail D D D D Low Input Offset Voltage 950 µV Max at TA = 25°C (TLC2262A) Macromodel Included Performance Upgrade for the TS27M2/M4 and TLC27M2/M4 Available in Q-Temp Automotive HighRel Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 60 description The TLC2262 and TLC2264 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC226x family offers a compromise between the micropower TLC225x and the ac performance of the TLC227x. It has low supply current for battery-powered applications, while still having adequate ac performance for applications that demand it. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Figure 1 depicts the low level of noise voltage for this CMOS amplifier, which has only 200 µA (typ) of supply current per amplifier. Vn VN – Equivalent Input Noise Voltage – nV/ Hz nv//Hz 50 VDD = 5 V RS = 20 Ω TA = 25°C 40 30 20 10 The TLC226x, exhibiting high input impedance 0 and low noise, are excellent for small-signal 10 102 103 104 conditioning for high-impedance sources, such as f – Frequency – Hz piezoelectric transducers. Because of the micropower dissipation levels, these devices work well Figure 1 in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC226xA family is available and has a maximum input offset voltage of 950 µV. This family is fully characterized at 5 V and ± 5 V. The TLC2262/4 also makes great upgrades to the TLC27M2/L4 or TS27M2/L4 in standard designs. They offer increased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Advanced LinCMOS is a trademark of Texas Instruments Incorporated. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1999, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TLC226x, TLC226xA Advanced LinCMOS™ RAIL-TO-RAIL OPERATIONAL AMPLIFIERS SLOS177A – FEBRUARY 1997 – REVISED JULY 1999 TLC2262 AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25°C 2.5 mV 950 µV µ 2.5 mV 950 µV µ 2.5 mV 950 µV 2.5 mV SMALL OUTLINE (D) TLC2262CD TLC2262AID TLC2262ID TLC2262AQD TLC2262QD — — CHIP CARRIER (FK) — — — — — TLC2262AMFK TLC2262MFK CERAMIC DIP (JG) — — — — — TLC2262AMJG TLC2262MJG PLASTIC DIP (P) TLC2262CP TLC2262AIP TLC2262IP — — — — TSSOP (PW) TLC2262CPWLE TLC2262AIPWLE — — — — — CERAMIC FLATPACK (U) — — — — — TLC2262AMU TLC2262MU 0°C to 70°C – 40°C to 125°C – 40°C to 125°C – 55°C to 125°C The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2262CDR). The PW package is available only left-end taped and reeled. Chips are tested at 25°C. TLC2264 AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25°C 2.5 mV 950 µV µ 2.5 mV 950 µV µ 2.5 mV 950 µV 2.5 mV SMALL OUTLINE (D) TLC2264CD TLC2264AID TLC2264ID TLC2264AQD TLC2264QD — — CHIP CARRIER (FK) — — — — — TLC2264AMFK TLC2264MFK CERAMIC DIP (J) — — — — — TLC2264AMJ TLC2264MJ PLASTIC DIP (N) TLC2264CN TLC2264AIN TLC2264IN — — — — TSSOP (PW) TLC2264CPWLE TLC2264AIPWLE — — — — — CERAMIC FLATPACK (W) — — — — — TLC2264AMW TLC2264MW 0°C to 70°C – 40°C to 125°C – 40°C to 125°C – 55°C to 125°C The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2264CDR). The PW package is available only left-end taped and reeled. Chips are tested at 25°C. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLC226x, TLC226xA Advanced LinCMOS™ RAIL-TO-RAIL OPERATIONAL AMPLIFIERS SLOS177A – FEBRUARY 1997 – REVISED JULY 1999 1OUT 1IN – 1IN + VDD – /GND 1 2 3 4 8 7 6 5 VDD + 2OUT 2IN – 2IN + NC 1IN – NC 1IN + NC 4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13 NC 1OUT NC VDD+ NC NC 2OUT NC 2IN – NC TLC2262M, TLC2262AM . . . U PACKAGE (TOP VIEW) TLC2262C, TLC2262AC TLC2262I, TLC2262AI TLC2262Q, TLC2262AQ D, P, OR PW PACKAGE (TOP VIEW) TLC2262M, TLC2262AM . . . FK PACKAGE (TOP VIEW) TLC2262M, TLC2262AM . . . JG PACKAGE (TOP VIEW) 1OUT 1IN – 1IN + VDD – /GND 1 2 3 4 8 7 6 5 VDD + 2OUT 2IN – 2IN + NC 1OUT 1IN – 1IN + VCC – /GND NC VDD– /GND NC 2IN+ NC 1 2 3 4 5 10 9 8 7 6 NC VCC + 2OUT 2IN – 2IN + 1OUT 1IN – 1IN + VDD + 2IN + 2IN – 2OUT 1 2 3 4 5 6 7 14 13 12 11 10 9 8 4OUT 4IN – 4IN + VDD – / GND 3IN + 3IN – 3OUT 1OUT 1IN – 1IN + VDD + 2IN + 2IN – 2OUT 1 2 3 4 5 6 7 14 13 12 11 10 9 8 4OUT 4IN – 4IN + VDD – / GND 3IN + 3IN – 3OUT 1IN + NC VCC + NC 2IN + 4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13 1IN – 1OUT NC 4OUT 4IN – 4IN + NC VCC – /GND NC 3IN + 2IN – 2OUT NC 3OUT 3IN – TLC2264C, TLC2264AC TLC2264I, TLC2264AI TLC2264Q, TLC2264AQ D, N, OR PW PACKAGE (TOP VIEW) TLC2264M, TLC2264AM . . . FK PACKAGE (TOP VIEW) TLC2264M, TLC2264AM . . . J OR W PACKAGE (TOP VIEW) POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SLOS177A – FEBRUARY 1997 – REVISED JULY 1999 TLC226x, TLC226xA Advanced LinCMOS ™ RAIL-TO-RAIL OPERATIONAL AMPLIFIERS equivalent schematic (each amplifier) VDD + 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Template Release Date: 7–11–94 Q3 Q6 Q9 Q12 Q14 Q16 IN + C1 IN – Q1 Q4 Q13 Q15 Q17 R5 OUT D1 Q2 R3 Q5 R4 Q7 Q8 Q10 Q11 R1 R2 VDD – / GND ACTUAL DEVICE COMPONENT COUNT† COMPONENT Transistors Resistors Diodes TLC2262 38 28 9 TLC2264 76 56 18 Capacitors 3 6 † Includes both amplifiers and all ESD, bias, and trim circuitry TLC226x, TLC226xA Advanced LinCMOS™ RAIL-TO-RAIL OPERATIONAL AMPLIFIERS SLOS177A – FEBRUARY 1997 – REVISED JULY 1999 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V Supply voltage, VDD – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 8 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 16 V Input voltage, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD– – 0.3 V to VDD+ Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 5 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Total current out of VDD – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 125°C Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 125°C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P, and PW packages . . . . . . . 260°C J, JG, U, and W packages . . . . . . . 300°C † Stresses beyond those listed under “absolute maximum ratings” may cau