Tantalum Dipped / Radial

www.DataSheet4U.com TANTALUM DIPPED / RADIAL — POLAR PERFORMANCE CHARACTERISTICS • CAPACITANCE/VOLTAGE RANGE: T35X/T39X: 0.1-680µF, 3-50 Volts. T36X: 0.1-330µF, 6-50 Volts. • CAPACITANCE TOLERANCE: Available in standard EIA nominal values with ±20% and ±10% standard. • DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings. See Application Notes Section, page 76 for additional information. • DC LEAKAGE CURRENT: Maximum leakage values at 25° are shown in part number listings, pages 63-65, 67, 68 and 70. See Application Notes Section, pages 76 & 77 for additional information. • RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, pages 76 & 77 for description. • IMPEDANCE and ESR: See Application Notes Section, page 77 & 78 for description. Reference ESR values are shown in table below. • AC RIPPLE VOLTAGE: Permissible AC ripple voltage is related to equivalent series resistance (ESR) and power dissipation capability. Maximum power dissipation for each case size is listed in Table below. For additional description see page 78. Case Size T35X, A T39X B C D E F G H J K L M T36X A B C D Power Dissipation (max.) @ 25°C (watts) .040 .050 .060 .065 .070 .080 .090 .100 .110 .120 .130 .140 .050 .075 .090 .135 Maximum Power Dissipation Capability @ 25°C Commercial T35X/T36X/T39X ESR (OHMS) at 100 kHz @ +25°C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of these values for any particular T35X, T36X, T39X Series product.) Cap. µF 0.10 0.15 0.22 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 6 Volt 10 Volt 16 Volt 20 Volt 25 Volt 35 Volt 26.0 21.0 17.0 15.0 13.0 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 1.0 0.8 50 Volt 26.0 21.0 17.0 15.0 13.0 10.0 8.0 5.0 3.5 3.0 2.5 2.0 1.6 1.2 1.0 • ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213. B. Thermal Shock, MIL-STD-202, Method 107, Condition A. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 80, 81 and 82. • LEAD MATERIAL: Effective June 30, 2005 the T35x, T368 and T39x Series will be available, as an option, with 100% Matte Tin (RoHS compliant) lead wire or Sn/Pb lead wire. Please see page 63 for part number ordering information. The T363 and T369 lead material will remain Sn/Pb solder coated steel core with a copper ply per MIL-STD-127 and at this time will not be available with a 100% Sn option. • LEAD TAPE AND REEL: Reeling per specification RS-468. See pages 72 - 74 for additional information. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 61 Tantalum Dipped / Radial — Polar 13.0 10.0 8.0 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 0.9 0.7 13.0 10.0 8.0 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 0.8 0.6 10.0 8.0 6.0 5.0 4.0 3.2 2.5 2.0 1.6 1.3 1.0 0.8 0.6 10.0 9.0 7.0 5.5 4.5 3.6 2.9 2.3 1.8 1.4 1.2 0.9 0.6 10.0 8.0 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 1.0 0.8 www.DataSheet4U.com TANTALUM DIPPED / RADIAL - POLAR T350, T351, T352, T353, T354, T355 & T356 SERIES “ULTRADIP II” The KEMET ‘UltraDip II’ Capacitors offer the designer of quality instruments and entertainment systems the widely recognized advantages inherent in solid tantalum capacitors at competitive prices. The ‘UltraDip II’ Series, miniature dipped solid tantalum capacitors, provide the designer with the advantage of compactness plus low leakage and low DF performance characteristics for filtering, bypassing, coupling, blocking and RC timing circuits. This series features a capacitance range from 0.1 to 680 microfarads at voltages from 3 to 50 VDC. ‘UltraDip II’ capacitors utilize the same sophisticated materials and processes which have advanced KEMET Electronics Corporation to the leadership position in solid tantalum capacitors. The plastic case provides a tough barrier coating and maintains precision of lead wire spacing within ±0.015 inch. The gold color epoxy utilized permits Laser marking with outstanding permanency and legibility. All case sizes are printed with capacitance, voltage, polarity and vendor identification. Solid tantalum devices exhibit no degradation failure mode during shelf storage and show a constantly decreasing failure rate (i.e., absence of wearout mechanism) during life tests. The ‘UltraDip II’ Series provides self-insulating cases which are resistant to shock and vibration. These capacitors exhibit low DCL, ESR and Impedance and have excellent temperature stability. Effective June 30, 2005 the T35x Series is RoHS compliant. CAPACITOR OUTLINE DRAWINGS T350 D Max. H Max. D Max. H Max. T351 D Max. T352 T353 D Max. H Max. H Max. T354 D Max. H Max. T355 .250±.025 (6.35±.64) D Max. H Max. T356 D Max. H Max. .50±.05 **.02 (0.5) Lead Spacing See Note 2 .02 (0.5) .10 (2.54) .187±.032 (4.75±.81) .20 (5.08) .02 .187±.032 (0.5) (4.75±.81) .20 (5.08) .187±.032 (4.75±.81) .250 (6.35) .187±.032 (4.75±.81) .187±.032 (4.75±.81) .125 (3.18) .187±.032 (4.75±.81) .20 (5.08) *Lead Tolerance = ± .015 (± .38 mm) ** All Lead Diameters = .02 ± .002 (0.5 ± .05 mm) DIMENSIONS — INCHES (MILLIMETERS) All Case Size A B C D E F G H J(2) K(2) L(2) M(2) D Max Diameter .175 (4.5) .175 (4.5) .196 (5.0) .196 (5.0) .216 (5.5) .236 (6.0) .250 (6.3) .300 (7.6) .330 (8.4) .350 (8.9) .350 (8.9) .400 (10.2) T350 H(1) Max Height .280 (7.1) .300 (7.6) .330 (8.4) .340 (8.6) .350 (8.9) .390 (9.9) .400 (10.2) .400 (10.2) .500 (12.7) .530 (13.5) .630 (16.0) .670 (17.0) Note 3 Note 3 T351 H(1) Max Height .380 (9.6) .390 (9.9) .420 (10.7) .430 (10.9) .440 (11.2) .480 (12.2) .490 (12.4) .500 (12.7) T352 H(1) Max Height .400 (10.2) .410 (10.4) .440 (11.2) .450 (11.4) .460 (11.7) .500 (12.7) .510 (13.0) .520 (13.2) T353 H(1) Max Height .400 (10.2) .410 (10.4) .440 (11.2) .450 (11.4) .460 (11.7) .500 (12.7) .510 (13.0) .520 (13.2) .580 (14.7) .630 (16.0) .730 (18.5) .760 (19.3) T354 H(1) Max Height .340 (8.6) .350 (8.9) .380 (9.6) .390 (9.9) .400 (10.2) .440 (11.2) .450 (11.4) .470 (11.9) .550 (14.0) .610 (15.5) .710 (18.1) .740 (18.8) Note 3 T355 H(1) Max Height .340 (8.6) .350 (8.9) .380 (9.6) .390 (9.9) .400 (10.2) .440 (11.2) .450 (11.4) .470 (11.9) T356 H(1) Max Height .340 (8.6) .350 (8.9) .380 (9.6) .390 (9.9) .400 (10.2) .440 (11.2) .450 (11.4) .470 (11.9) .550 (14.0) .610 (15.5) .710 (18.1) .740 (18.8) NOTES: (1) All “H” Dimensions are from Capacitor seating plane to top of Capacitor. (2) On T350 Series, case sizes A-H are supplied with .100”(2.54) lead spacing—case sizes J-M are supplied with .200”(5.08) lead spacing. (3) These case sizes are not available for T351, T352 & T355 capacitors. LEAD CONFIGURATION & SPACING CHART LEAD CASE CONFIGURATION .100 .125 .200 .250 A-H STRAIGHT LEAD STAND OFF SNAP-IN .100 “NOT AVAILABLE” .125 .200 .250 J-M STRAIGHT LEAD STAND OFF SNAP-IN X X “NOT AVAILABLE” X X X X “NOT AVAILABLE” X X X X X X X X X X X T350 X T351 X X X T352 SERIES T353 T354 T355 T356 X T350 T351 T352 T353 T354 T355 T356 62 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 www.DataSheet4U.com TANTALUM DIPPED / RADIAL - POLAR T350, T351, T352, T353, T354, T355 & T356 SERIES “ULTRADIP II” T35X & T36X ORDERING INFORMATION T TANTALUM SERIES Insert appropriate number to replace letter “X” — 350, 351, 352, 353, 354, 355, 356, 363, 368, or 369. 3XX A 105 M 035 A S* LEAD MATERIAL S — Sn/Pb (tin/lead) T – 100% Sn (tin) FAILURE RATE LEVEL A — Not Applicable CASE SIZE A, B, C, D, E, F, G, H, J, K, L & M VOLTAGE RATING For 6.3 Volts use 006 CAPACITANCE TOLERANCE PICOFARAD CODE First two digits are significant figures. Third figure is the number of zeros following. M — ±20% K — ±10% J — ±5% Available on special order. * T363 & T369 capacitors available only with M & K tolerances *Part Number Example: T350A105M035AS (14 digits – no spaces) T35X & T368 MARKING INFORMATION KEMET Trademark Capacitance (pF code) Voltage Rating Polarity Stripe (+) 335 35K 418 Polarity + Date Code T35X RATINGS AND PART NUMBER REFERENCE MAX. DISSIPATION FACTOR %@25°C, 120Hz MAX. DISSIPATION FACTOR %@25°C, 120Hz CAPACITANCE µF CASE SIZE KEMET PART NUMBER D.C. LEAKAGE µA@25°C CAPACITANCE µF CASE SIZE KEMET PART NUMBER D.C. LEAKAGE µA@25°C 3 VOLT RATING AT 85°C — 2 VOLT RATING AT 125°C 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 A A A A A B B C C D D E E F F G G H H J J K K L L M M T35(1)A475(3)003A(4) T35(1)A565(3)003A(4) T35(1)A685(3)003A(4) T35(1)A825(3)003A(4) T35(1)A106(3)003A(4) T35(1)B126(3)003A(4) T35(1)B156(3)003A(4) T35(1)C186(3)003A(4) T35(1)C226(3)003A(4) T35(1)D276(3)003A(4) T35(1)D336(3)003A(4) T35(1)E396(3)003A(4) T35(1)E476(3)003A(4) T35(1)F566(3)003A(4) T35(1)F686(3)003A(4) T35(1)G826(3)003A(4) T35(1)G107(3)003A(4) T35(1)H127(3)003A(4) T35(1)H157(3)003A(4) T35(2)J187(3)003A(4) T35(2)J227(3)003A(4) T35(2)K277(3)003A(4) T35(2)K337(3)003A(4) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.8 0.9 1.1 1.3 1.6 2.0 2.4 2.9 3.6 4.3 5.3 6.5 7.9 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 9 9 9 9 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 6.3 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C A A A A A B B C C D D E E F F G G H H J J K K L L T35(1)A335(3)006A(4) T35(1)A395(3)006A(4) T35(1)A475(3)006A(4) T35(1)A565(3)006A(4) T35(1)A685(3)006A(4) T35(1)B825(3)006A(4) T35(1)B106(3)006A(4) T35(1)C126(3)006A(4) T35(1)C156(3)006A(4) T35(1)D186(3)006A(4) T35(1)D226(3)006A(4) T35(1)E276(3)006A(4) T35(1)E336(3)006A(4) T35(1)F396(3)006A(4) T35(1)F476(3)006A(4) T35(1)G566(3)006A(4) T35(1)G686(3)00