Ultra Precision Dual 2:1 400mV Lvpecl Mux

Micrel ULTRA PRECISION DUAL 2:1 400mV LVPECL MUX WITH INTERNAL TERMINATION Precision Edge™ SY58027U Precision Edge™ SY58027U FEATURES s Two independent differential 2:1 multiplexers s Guaranteed AC performance over temperature and Precision Edge™ voltage: • DC-to >10.7Gbps data rate throughput DESCRIPTION • < 290ps IN-to-Out tpd • < 80ps tr / tf The SY58027U features two ultra-fast, low jitter 2:1 s Unique, patent-pending input isolation design differential muxes with a guaranteed maximum data minimizes crosstalk throughput of 10.7Gbps. s Ultra-low jitter design: The SY58027U differential inputs include a unique • <1psrms random jitter internal termination design that allows access to the • <10pspp deterministic jitter termination network through a VT pin. The device easily • <10pspp total jitter (clock) interfaces to different logic standards, both AC- and DC• <0.7psrms crosstalk-induced jitter coupled, without external resistor-bias and termination s Unique, patent-pending 50Ω input termination and networks. The result is a clean, stub-free, low jitter interface VT pin accepts DC-coupled and AC-coupled inputs solution. The differential 400mV LVPECL outputs have (CML, LVDS, PECL) extremely fast rise/fall times guaranteed to be less than 80ps. s 400mV LVPECL output swing The SY58027U operates from a 2.5V or 3.3V supply and s Power supply 2.5V ±5% or 3.3V ±10% is guaranteed over the full industrial temperature range s –40°C to +85°C temperature range (–40°C to +85°C). The SY58027U is part of Micrel’s Precision s Available in 32-pin (5mm × 5mm) MLF™ package www.DataSheet4U.com Edge™ product family. APPLICATIONS s s s s Data communication systems All SONET OC3-OC768 applications All Fibre Channel applications All GigE applications All support documentation can be found on Micrel’s web site at www.micrel.com. FUNCTIONAL BLOCK DIAGRAM INA0 50Ω VTA0 50Ω /INA0 VREF-ACA0 INA1 50Ω VTA1 50Ω /INA1 VREF-ACA1 SELA (TTL/CMOS) 1 S MUX A 0 INB0 50Ω VTB0 50Ω 0 QA /QA /INB0 VREF-ACB0 INB1 50Ω VTB1 50Ω /INB1 VREF-ACB1 SELB (TTL/CMOS) 1 S MUX B QB /QB AnyGate and Precision Edge are trademarks of Micrel, Inc. MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc. M9999-051804 hbwhelp@micrel.com or (408) 955-1690 Rev.: A Amendment: /0 1 Issue Date: May 2004 Micrel Precision Edge™ SY58027U PACKAGE/ORDERING INFORMATION /INA1 VREF-ACA1 VTA1 INA1 /INA0 VREF-ACA0 VTA0 INA0 Ordering Information(1) Part Number GND VCC QA /QA VCC NC SELA VCC Package Type MLF-32 MLF-32 Operating Range Industrial Industrial Package Marking SY58027U SY58027U INB0 VTB0 VREF-ACB0 /INB0 INB1 VTB1 VREF-ACB1 /INB1 1 2 3 4 5 6 7 8 32 3130 29 28 27 26 25 24 23 22 21 20 19 18 17 9 10 11 12 13 14 15 16 SY58027UMI SY58027UMITR(2) Notes: 1. Contact factory for die availability. Die are guaranteed at TA = 25°C, DC electricals only. 2. Tape and Reel. 32-Pin MLF™ (MLF-32) PIN DESCRIPTION Pin Number 25, 28, 29, 32, 1, 4, 5, 8 Pin Name INA0, /INA0, INA1, /INA1, INB0, /INB0, INB1, /INB1 Pin Function Differential Inputs: These input pairs are the differential signal inputs to the device. Inputs accept AC- or DC-coupled differential signals as small as 100mV. Each pin of a pair internally terminates to a VT pin through 50Ω. Note that these inputs will default to an indeterminate state if left open. Unused differential input pairs can be terminated by connecting one input to VCC and the complementary input to GND through a 1kΩ resistor. The VT pin is to be left open in this configuration. Please refer to the “Input Interface Applications” section for more details. Input Termination Center-Tap: Each side of the differential input pair, terminates to a VT pin. Each VT pin provides a center-tap to a termination network for maximum interface flexibility. See “Input Interface Applications” section for more details. Bank A, Bank B Input Channel Select (TTL/CMOS): These TTL/CMOS-compatible inputs select the inputs to the multiplexers. These inputs are internally connected to a 25kΩ pull-up resistor and will default to a logic HIGH state if left open. Input switching threshold is VCC/2. Reference Output Voltage: These outputs bias to VCC –1.2V. Connect to VT pin when AC-coupling the data inputs. Bypass with 0.01µF low ESR capacitor to VCC. Maximum current source or sink is 0.5mA. See “Input Interface Applications” section. Positive Power Supply: Bypass with 0.1µF0.01µF low ESR capacitors. Differential 100k LVPECL Outputs: MUX A and MUX B selected LVPECL outputs. See “Output Interface Applications” section for termination. Refer to the “Truth Table” for logic operation. Ground: Ground pins and exposed pad must be connected to the same ground plane. Not connected. 26, 30, 2, 6 VTA0 , VTA1, VTB0, VTB1 SELA, SELB 18, 15 27, 31, 3, 7 VREF-ACA0, VREF-ACA1, VREF-ACB0, VREF-ACB1 VCC QA, /QA, QB, /QB GND, Exposed pad NC 10, 13, 16, 17, 20, 23 22, 21, 12, 11 9, 24 14, 19 M9999-051804 hbwhelp@micrel.com or (408) 955-1690 GND VCC /QB QB VCC NC SELB VCC 2 Micrel Precision Edge™ SY58027U Absolute Maximum Ratings(1) Power Supply Voltage (VCC ) ...................... –0.5V to +4.0V Input Voltage (VIN) ......................................... –0.5V to VCC LVPECL Output Current (IOUT) Continuous ............................................................. 50mA Surge .................................................................... 100mA Termination Current(3) Source or sink current on VT ..................................... ±100mA Input Current Source or sink current on IN, /IN .......................... ±50mA Current (VREF-AC) Source or sink current on VREF-AC(3) .................. ±1.5mA Lead Temperature (soldering, 10 sec.) ..................... 265°C Storage Temperature Range (TS ) ........... –65°C to +150°C Operating Ratings(2) Power Supply Voltage (VCC) ............... +2.375V to +2.625V ............................................................ +3.0V to +3.6V Ambient Temperature Range (TA) ............. –40°C to +85°C Package Thermal Resistance MLF™ (θJA) Still-Air ............................................................. 35°C/W 500lpfm ............................................................ 28°C/W MLF™ (ψJB)(4) Junction-to-board ............................................ 20°C/W DC ELECTRICAL CHARACTERISTICS(5) TA= –40°C to +85°C; Unless otherwise stated. Symbol VCC ICC RDIFF_IN RIN VIH VIL VIN VDIFF_IN VT IN VREF-AC Notes: 1. Permanent device damage may occur if ratings in the “Absolute Maximum Ratings” section are exceeded. This is a stress rating only and functional operation is not implied for conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratings conditions for extended periods may affect device reliability. 2. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings. 3. Due to the limited drive capability, use for input of the same package only. 4. Junction-to-board resistance assumes exposed pad is soldered (or equivalent) to the device’s most negative potential (GND) on the PCB. ΨJB uses 4layer θJA in still air unless otherwise stated. 5. The circuit is designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. Parameter Power Supply Power Supply Current Differential Input Resistance (IN-to-/IN) Input Resistance (IN-to-VT, /IN-to-VT) Input High Voltage (IN, /IN) Input Low Voltage (IN, /IN) Input Voltage Swing (IN, /IN) Differential Input Voltage Swing |IN – /IN| In to VT (IN, /IN) Output Reference Voltage Condition VCC = 2.5V VCC = 3.3V No load, max. VCC. Min 2.375 3.0 Typ 2.5 3.3 100 Max 2.625 3.6 140 120 Units V V mA Ω 80 100 40 VIH min must be ≥1.2V. See Figure 1a. See Figure 1b. VCC–1.6 0 0.1 0.2 50 60 VCC VIH –0.1 1.7 3.4 1.28 Ω V V V V V V VCC–1.3 VCC–1.2 VCC–1.1 M9999-051804 hbwhelp@micrel.com or (408) 955-1690 3 Micrel Precision Edge™ SY58027U LVPECL OUTPUTS DC ELECTRICAL CHARACTERISTICS(6) VCC = 2.5V ±5% or 3.3V ±10%; TA = –40°C to +85°C; RL = 50Ω to VCC–2V, unless otherwise stated. Symbol VOH VOL VOUT VDIFF-OUT Parameter Output HIGH Voltage Q, /Q Output LOW Voltage Q, /Q Output Voltage Swing Q, /Q Differential Output Voltage Swing |Q-/Q| See Figure 1a. See Figure 1b. Condition Min VCC–1.145 VCC–1.545 150 300 Typ — — 400 800 Max VCC–0.895 VCC–1.295 Units V V mV mV LVTTL/CMOS DC ELECTRICAL CHARACTERISTICS(6) VCC = 2.5V ±5% or 3.3V ±10%; TA= –40°C to 85°C unless otherwise stated. Symbol VIH VIL IIH IIL Note: 6. The circuit is designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. Parameter Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current Condition Min 2.0 Typ Max Units V 0.8 –175 VIL = 0V –300 75 V µA µA M9999-051804 hbwhelp@micrel.com or (408) 955-1690 4 Micrel Precision Edge™ SY58027U AC ELECTRICAL CHARACTERISTICS(7) VCC = 2.5V ±5% or 3.3V ±10%; TA= –40°C to +85°C; RL = 50Ω to VCC–2V, unless otherwise stated. Symbol fMAX tpd Parameter Maximum Operating Frequency VOUT ≥ 200mV Propagation Delay IN-to-Q SEL-to-Q tSKEW Input-to-Input Skew (Within-bank) Bank-to-Bank Skew Part-to-Part Skew tJITTER Data Clock Random Jitter (RJ) Deterministic Jitter (DJ) Cycle-to-Cycle Jitter (RJ) Total Jitter (TJ) Crosstalk-Induced Jitter Channel-to-Channel tr, tf Notes: 7. High-speed AC parameters are guaranteed by design and characterization. VIN swing ≥ 100mV unless otherwise noted. 8. Input-to-input skew is the difference in time between two inputs to the output within a bank. 9. Bank-to-bank skew is the difference in time from input to the output between bank. 10. Part-to-part skew is defined for two parts with identical power supply voltages at the same t