N-channel Power MOSFET

www.DataSheet4U.com STP120NF10 - STB120NF10 STW120NF10 N-channel 100V - 0.009Ω - 110A - TO-247 - TO-220 - D²PAK STripFET™ II Power MOSFET General features Type STW120NF10 STP120NF10 STB120NF10 ■ ■ ■ VDSS 100V 100V 100V RDS(on) <0.0105Ω <0.0105Ω <0.0105Ω ID 110A 110A 110A 3 1 D²PAK TO-247 Exceptional dv/dt capability 100% avalanche tested Application oriented characterization 1 3 2 Description This Power MOSFET series realized with STMicroelectronics unique STripFET™ process has specifically been designed to minimize the on-resistance. It is therefore suitable as primary switch in advanced high-efficiency,high-frequency isolated DC-DC converters for Telecom and Computer application. It is also intended for any applications with low gate drive requirements. TO-220 Internal schematic diagram Applications ■ Switching application Order codes Part number STW120NF10 STP120NF10 STB120NF10 Marking W120NF10 P120NF10 B120NF10 Package TO-247 TO-220 D²PAK Packaging Tube Tube Tape & reel October 2006 Rev 6 1/15 www.st.com 15 Contents STW120NF10 - STP120NF10 - STB120NF10 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit ................................................ 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 STW120NF10 - STP120NF10 - STB120NF10 Electrical ratings 1 Electrical ratings Table 1. Symbol VDS VGS ID ID IDM (1) Absolute maximum ratings Parameter Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25°C Drain current (continuous) at TC=100°C Drain current (pulsed) Total dissipation at TC = 25°C Derating factor Value 100 ± 20 110 77 440 312 2.08 10 550 -55 to 175 300 Unit V V A A A W W/°C V/ns mJ °C °C PTOT dv/dt (2) EAS(3) TJ Tstg TL Peak diode recovery voltage slope Single pulse avalanche energy Operating junction temperature Storage temperature Maximum lead temperature for soldering purpose 1. Pulse width limited by safe operating area. 2. ISD < 120A, di/dt < 300A/µs, VDD = 80%V(BR)DSS 3. Starting Tj = 25°C, ID = 60A, VDD = 50V Table 2. Symbol Rthj-case Rthj-amb Thermal resistance Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Value 0.48 62.5 Unit °C/W °C/W 3/15 Electrical characteristics STW120NF10 - STP120NF10 - STB120NF10 2 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250µA, VGS= 0 VDS = Max rating, VDS = Max rating@125°C VGS = ±20V VDS= VGS, ID = 250µA VGS= 10V, ID= 60A 2 0.009 Min. 100 1 10 ±100 Typ. Max. Unit V µA µA nA V Ω 4 0.0105 Table 4. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =25V, ID = 60A VDS =25V, f=1 MHz, VGS=0 VDD=80V, ID = 120A VGS =10V (see Figure 13) Min. Typ. 90 5200 785 325 172 32 64 233 Max. Unit S pF pF pF nC nC nC 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 4/15 STW120NF10 - STP120NF10 - STB120NF10 Electrical characteristics Table 5. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD=50V, ID= 60A, RG=4.7Ω, VGS=10V (see Figure 12) Min. Typ. 25 90 132 68 Max. Unit ns ns ns ns Table 6. Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=120A, VGS=0 ISD=120A, di/dt = 100A/µs, VDD=40V, Tj=150°C (see Figure 17) 152 760 10 Test conditions Min Typ. Max 110 440 1.3 Unit A A V ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/15 Electrical characteristics STW120NF10 - STP120NF10 - STB120NF10 2.1 Figure 1. Electrical characteristics (curves) Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Normalized BVDSS vs temperature Figure 6. Static drain-source on resistance 6/15 STW120NF10 - STP120NF10 - STB120NF10 Figure 7. Gate charge vs gate-source voltage Figure 8. Electrical characteristics Capacitance variations Figure 9. Normalized gate threshold voltage vs temperature Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/15 Test circuit STW120NF10 - STP120NF10 - STB120NF10 3 Test circuit Figure 13. Gate charge test circuit Figure 12. Switching times test circuit for resistive load Figure 14. Test circuit for inductive load Figure 15. Unclamped inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform 8/15 STW120NF10 - STP120NF10 - STB120NF10 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 Package mechanical data STW120NF10 - STP120NF10 - STB120NF10 TO-247 MECHANICAL DATA mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620 DIM. A A1 b b1 b2 c D E e L L1 L2 øP øR S 10/15 STW120NF10 - STP120NF10 - STB120NF10 Package mechanical data TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 øP Q 11/15 Package mechanical data STW120NF10 - STP120NF10 - STB120NF10 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0º 4.88 15 1.27 1.4 2.4 0.4 4º 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 12/15 STW120NF10 - STP120NF10 - STB120NF10 Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 13/15 Revision history STW120NF10 - STP120NF10 - STB120NF10 6 Revision history Table 7. Date 20-Mar-2006 31-Mar-2006 19-Jun-2006 28-Jun-2006 05-Oct-2006 Revision history Revision 2 3 4 5 6 Preliminary datasheet Typing error New template, no content change New ID value on Table 1 New value on Table 6 Changes 14/15 STW120NF10 - STP120NF10 - STB120NF10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST