N-CHANNEL MOSFET

www.DataSheet4U.com STP25NM60N - STF25NM60N STB25NM60N/-1 - STW25NM60N N-CHANNEL 600V 0.140Ω-20A TO-220/FP/D²/I²PAK/TO-247 SECOND GENERATION MDmesh™ MOSFET PRODUCT PREVIEW Table 1: General Features TYPE STB25NM60N-1 STF25NM60N STP25NM60N STW25NM60N STB25NM60N s s s s s Figure 1: Package RDS(on) < 0.170 Ω < 0.170 Ω < 0.170 Ω < 0.170 Ω < 0.170 Ω ID 20 A 20(*) A 20 A 20 A 20 A VDSS (@Tjmax) 650 V 650 V 650 V 650 V 650 V 3 1 2 1 3 2 TO-220 3 1 TO-220FP s WORLD’S LOWEST ON RESISTANCE TYPICAL RDS(on) = 0.140 Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED LOW INPUT CAPACITANCE AND GATE CHARGE LOW GATE INPUT RESISTANCE D²PAK 3 12 3 I²PAK TO-247 Figure 2: Internal Schematic Diagram 2 1 DESCRIPTION The STP25NM60N is realized with the second generation of MDmesh Technology. This revolutionary MOSFET associates a new vertical structure to the Company's strip layout to yield the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters APPLICATIONS The MDmesh™ II family is very suitable for increase the power density of high voltage converters allowing system miniaturization and higher efficiencies. Table 2: Order Code SALES TYPE STB25NM60N-1 STF25NM60N STP25NM60N STW25NM60N STB25NM60N MARKING B25NM60N F25NM60N P25NM60N W25NM60N B25NM60N PACKAGE I²PAK TO-220FP TO-220 TO-247 D²PAK PACKAGING TUBE TUBE TUBE TUBE TAPE & REEL Rev. 4 June 2005 This is preliminary information on a new product now in development. Details are subject to change without notice. 1/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N Table 3: Absolute Maximum ratings Symbol Parameter Value TO-220/I²PAK TO-247/D²PAK VDS VDGR VGS ID ID IDM (1) PTOT dv/dt (2) Tstg Tj Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 kΩ) Gate- source Voltage Drain Current (continuous) at TC = 25°C Drain Current (continuous) at TC = 100°C Drain Current (pulsed) Total Dissipation at TC = 25°C Derating Factor Peak Diode Recovery voltage slope Storage Temperature Max. Operating Junction Temperature 20 12.8 80 160 1.28 TBD – 55 to 150 150 600 600 ± 25 20 (*) 12.8 (*) 80 (*) 40 0.32 TO-220FP V V V A A A W W/°C V/ns °C °C Unit (*) Limited only by maximum temperature allowed (1) Pulse width limited by safe operating area (2) ISD ≤ 20 A, di/dt ≤ 400 A/µs, VDD =80%V(BR)DSS. Table 4: Thermal Data TO-220/I²PAK TO-247/D²PAK Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 0.78 62.5 300 TO-220FP 3.1 °C/W °C/W °C Table 5: Avalanche Characteristics Symbol IAS EAS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAS, VDD = 50 V) Max Value TBD TBD Unit A mJ ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) Table 6: On /Off Symbol V(BR)DSS dv/dt(2) IDSS IGSS VGS(th) RDS(on Parameter Drain-source Breakdown Voltage Drain Source Voltage Slope Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance Test Conditions Min. ID = 1 mA, VGS = 0 Vdd=TBD, Id=TBD, Vgs=TBD VDS = Max Rating VDS = Max Rating, TC = 125°C VGS = ± 20 V VDS = VGS, ID = 250 µA VGS = 10 V, ID = 10 A 2 3 0.140 600 TBD 1 10 100 4 0.170 Value Typ. Max. V V/ns µA µA nA V Ω Unit (2) Characteristic value at turn off on inductive load 2/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N ELECTRICAL CHARACTERISTICS (CONTINUED) Table 7: Dynamic Symbol gfs (1) Ciss Coss Crss COSS eq (3). RG Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Equivalent Output Capacitance Gate Input Resistance Test Conditions VDS = 15V , ID= 10A VDS = 25 V, f = 1 MHz, VGS = 0 Min. Typ. 17 2565 511 77 TBD 2 Max. Unit S pF pF pF pF Ω VGS = 0 V, VDS = 0 to 480 V f=1 MHz Gate DC Bias = 0 Test Signal Level = 20mV Open Drain VDD = 300 V, ID = 10 A, RG = 4.7 Ω, VGS = 10 V (see Figure 4) VDD = 480 V, ID = 20 A, VGS = 10 V (see Figure 7) td(on) tr td(off) tf Qg Qgs Qgd Turn-on Delay Time Rise Time Turn-off-Delay Time Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge TBD TBD TBD TBD 93 TBD TBD ns ns ns ns nC nC nC Table 8: Source Drain Diode Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 20 A, VGS = 0 ISD = 25 A, di/dt = 100 A/µs VDD = 100V (see Figure 5) ISD = 25 A, di/dt = 100 A/µs VDD = 100V, Tj = 150°C (see Figure 5) TBD TBD TBD TBD TBD TBD Test Conditions Min. Typ. Max. 20 80 1.3 Unit A A V ns µC A ns µC A (1) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (2) Pulse width limited by safe operating area. (3) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. 3/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N Figure 3: Unclamped Inductive Load Test Circuit Figure 6: Unclamped Inductive Wafeform Figure 4: Switching Times Test Circuit For Resistive Load Figure 7: Gate Charge Test Circuit Figure 5: Test Circuit For Inductive Load Switching and Diode Recovery Times 4/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 øP Q 5/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Ø A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 6/12 G www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N TO-262 (I2PAK) MECHANICAL DATA mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch 7/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N TO-247 MECHANICAL DATA mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620 DIM. A A1 b b1 b2 c D E e L L1 L2 øP øR S 8/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N TO-252 (DPAK) MECHANICAL DATA mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0o 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.8 1.00 8o 0.024 0o TYP. MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 0.039 0o inch TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398 DIM. P032P_B 9/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0795 0.960 3.937 1.197 BULK QTY 1000 1.039 0.520 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 0.35 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. 0.413 0.618 0.059 0.062 0.065 0.449 0.189 0.153 0.468 0.075 1.574 0.0098 0.0137 0.933 0.956 MAX. 0.421 0.626 0.063 0.063 0.073 0.456 0.197 0.161 0.476 0.082 BASE QTY 1000 * on sales type 10/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N Table 9: Revision History Date 30-Nov-2004 22-Mar-2005 23-May-2005 08-Jun-2005 Revision 1 2 3 4 Description of Changes First Release. Modified title Inserted some values in Tab7 Inserted new row in table 6 11/12 www.DataSheet4U.com STP25NM60N - STF25NM60N - STB25NM60N/-1 - STW25NM60N Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMic