HIGH VOLTAGE RECTIFIER BRIDGE STACK

www.DataSheet4U.com Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPX2091 Designer’s Data Sheet FEATURES: 1 AMP 9,300 VOLTS HIGH VOLTAGE RECTIFIER BRIDGE STACK ASPM • • • • • • Aerospace High Voltage Power Supply Applications High Blocking Voltage – 9,300 V Minimum Low Mechanical Stress Design Excellent Thermal Management – 2.5 oC/W TX, TXV, and Space Level Screening Available. Consult Factory for: o Higher Blocking Voltages o Faster Switching Speeds o Other Electrical Configurations o Available with a sandblasted case to promote adhesion, add “SAB” suffix. MAXIMUM RATINGS Peak Inverse Voltage (Each Bridge) Average Rectified Forward Current (Non-Repetitive, t = 8.3 ms Pulse) Peak Surge Current (Non-Repetitive, t = 8.3 ms Pulse, TA = 25oC) Operating Temperature Range Storage Temperature Range Maximum Thermal Resistance (Junction to Base) ELECTRICAL SCHEMATIC E20 B6 E21 B5 E19 B4 E18 B3 E17 Symbol B1 B2-B6 VR IO IFSM T OP T stg RθJB Value 3,300 1,200 1 25 -65 to +150 -65 to +150 2.5 Units Volts Amps Amps o o C C o C/W E16 B2 B1 E15 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0023D DOC Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPX2091 ELECTRICAL CHARACTERISTICS 1/ Instantaneous Forward Voltage Drop (IF = 1.0 A, 300 – 500 µsec Pulse) Instantaneous Forward Voltage Drop (IF = 0.35 A, TA = 100ºC, 300 – 500 µsec Pulse) Reverse Leakage Current (TA = 25ºC, 300 – 500 µsec Pulse) Reverse Leakage Current (TA = 100ºC, 300 – 500 µsec Pulse) Breakdown Voltage (IR = 100 µA) Insulation Resistance (All Terminals to Base @ 15,000 Volts) Reverse Recovery Time (IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A) Capacitance (Per Diode) B1: VR = 100 V B2-B6: VR = 10 V B1 B2-B6 B2-B6 B1: VR = 2500V B2-B6: VR = 1000V B1: VR = 2500V B2-B6: VR = 1000V B1 B2-B6 Symbol VF1 VF2 VF3 IR1 IR2 IR3 IR4 BVR1 BVR2 RINSUL1 tRR CT1 CT2 Min –– –– –– –– –– 3,300 1,200 10 –– –– –– Typ –– –– –– –– –– –– –– –– –– –– –– Max 7.5 2.5 1.3 1.0 50 –– –– –– 60 13 25 Units Volts Volts µA µA Volts GΩ nsec pF NOTE: 1/ All Electrical Characteristics Are for Bridge Leg @ TA = 25ºC (Unless Otherwise Specified) PACKAGE OUTLINE: ASPM .185 .165 2.130 10x .18 (=1.800) E3 E5 E7 E9 E11 E13 .840 .900 1.200 E21 E20 E19 E18 E17 E16 E15 E4 E6 E8 E10 E12 E14 .150 2.200 #4-40 UNC-2B .170 MIN LNG 4 Places (Back Side) .160 MAX .625 2.500 Tolerances (Unless Specified) .XX + .03 .XXX + .010