HEX INVERTERS

www.DataSheet4U.com SN54HCU04, SN74HCU04 HEX INVERTERS SCLS079E − MARCH 1984 − REVISED MARCH 2004 D Wide Operating Voltage Range of 2 V to 6 V D Outputs Can Drive Up To 10 LSTTL Loads D Low Power Consumption, 20-µA Max ICC SN54HCU04 . . . J OR W PACKAGE SN74HCU04 . . . D, DB, N, NS, OR PW PACKAGE (TOP VIEW) D D D D Typical tpd = 7 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Unbuffered Outputs SN54HCU04 . . . FK PACKAGE (TOP VIEW) 1A 1Y 2A 2Y 3A 3Y GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC 6A 6Y 5A 5Y 4A 4Y 2A NC 2Y NC 3A 1Y 1A NC VCC 6A 4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13 6Y NC 5A NC 5Y NC − No internal connection description/ordering information The ’HCU04 devices contain six independent inverters. They perform the Boolean function Y = A in positive logic. ORDERING INFORMATION TA PDIP − N PACKAGE† Tube of 25 Tube of 50 SOIC − D −40 C 85°C −40°C to 85 C SOP − NS SSOP − DB Reel of 2500 Reel of 250 Reel of 2000 Reel of 2000 Reel of 90 TSSOP − PW CDIP − J −55 C 125°C −55°C to 125 C CFP − W LCCC − FK Reel of 2000 Reel of 250 Tube of 25 Tube of 150 Tube of 55 ORDERABLE PART NUMBER SN74HCU04N SN74HCU04D SN74HCU04DR SN74HCU04DT SN74HCU04NSR SN74HCU04DBR SN74HCU04PW SN74HCU04PWR SN74HCU04PWT SNJ54HCU04J SNJ54HCU04W SNJ54HCU04FK SNJ54HCU04J SNJ54HCU04W HCU04 HCU04 HU04 HCU04 TOP-SIDE MARKING SN74HCU04N SNJ54HCU04FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL PRF 38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. Copyright  2004, Texas Instruments Incorporated POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3Y GND NC 4Y 4A 1 www.DataSheet4U.com SN54HCU04, SN74HCU04 HEX INVERTERS FUNCTION TABLE (each inverter) INPUT A H L OUTPUT Y L H SCLS079E − MARCH 1984 − REVISED MARCH 2004 logic diagram (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) SN54HCU04 MIN VCC VIH Supply voltage VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 2 V VIL VI VO Low-level input voltage Input voltage Output voltage VCC = 4.5 V VCC = 6 V 0 0 2 1.7 3.6 4.8 0.5 1.35 1.8 VCC VCC 0 0 NOM 5 MAX 6 SN74HCU04 MIN 2 1.7 3.6 4.8 0.5 1.35 1.8 VCC VCC V V V V NOM 5 MAX 6 UNIT V High-level input voltage TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 www.DataSheet4U.com SN54HCU04, SN74HCU04 HEX INVERTERS SCLS079E − MARCH 1984 − REVISED MARCH 2004 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC 2V IOH = −20 µA VOH VI = VCC or GND IOH = −4 mA IOH = −5.2 mA IOL = 20 µA VOL VI = VCC or GND IOL = 4 mA IOL = 5.2 mA II ICC Ci VI = VCC or 0 VI = VCC or 0, IO = 0 4.5 V 6V 4.5 V 6V 2V 4.5 V 6V 4.5 V 6V 6V 6V 2 V to 6 V 3 MIN 1.8 4 5.5 3.98 5.48 0.2 0.5 0.5 0.26 0.26 ±100 2 10 TA = 25°C TYP MAX SN54HCU04 MIN 1.8 4 5.5 3.7 5.2 0.2 0.5 0.5 0.4 0.4 ±1000 40 10 MAX SN74HCU04 MIN 1.8 4 5.5 3.84 5.34 0.2 0.5 0.5 0.33 0.33 ±1000 20 10 nA µA pF V V MAX UNIT switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC 2V tpd A Y 4.5 V 6V 2V tf Y 4.5 V 6V MIN TA = 25°C TYP MAX 40 8 7 38 8 6 80 16 14 75 15 13 SN54HCU04 MIN MAX 120 24 20 110 22 19 SN74HCU04 MIN MAX 100 20 17 95 19 16 ns ns UNIT operating characteristics, TA = 25°C PARAMETER Cpd Power dissipation capacitance per inverter TEST CONDITIONS No load TYP 20 UNIT pF POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 www.DataSheet4U.com SN54HCU04, SN74HCU04 HEX INVERTERS PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point CL = 50 pF (see Note A) LOAD CIRCUIT In-Phase Output Input 50% tPLH 50% 10% tPHL Input 90% 90% VCC 50% 10% 0 V tf Out-of-Phase Output 90% 50% 10% tf † tr is not applicable to ’HCU devices. VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES 90% tr † tPLH 50% 10% 90% 50% tPHL 90% VOH 50% 10% VOL tf VOH VCC 0V SCLS079E − MARCH 1984 − REVISED MARCH 2004 50% 10% VOL tr † tr VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time, with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 www.DataSheet4U.com www.ti.com PACKAGE OPTION ADDENDUM 12-Jan-2006 PACKAGING INFORMATION Orderable Device 86010012A 8601001CA SN54HCU04J SN74HCU04D SN74HCU04DBR SN74HCU04DBRE4 SN74HCU04DE4 SN74HCU04DR SN74HCU04DRE4 SN74HCU04DT SN74HCU04DTE4 SN74HCU04N SN74HCU04N3 SN74HCU04NE4 SN74HCU04NSR SN74HCU04NSRE4 SN74HCU04PW SN74HCU04PWE4 SN74HCU04PWR SN74HCU04PWRE4 SN74HCU04PWT SN74HCU04PWTE4 SNJ54HCU04FK SNJ54HCU04J (1) Status (1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE Package Type LCCC CDIP CDIP SOIC SSOP SSOP SOIC SOIC SOIC SOIC SOIC PDIP PDIP PDIP SO SO TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP LCCC CDIP Package Drawing FK J J D DB DB D D D D D N N N NS NS PW PW PW PW PW PW FK J Pins Package Eco Plan (2) Qty 20 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 20 14 25 1 1 1 50 TBD TBD TBD Green (RoHS & no Sb/Br) Lead/Ball Finish Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI MSL Peak Temp (3) N / A for Pkg Type N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type Call TI N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type 2000 Green (RoHS & no Sb/Br) 2000 Green (RoHS & no Sb/Br) 50 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) 250 250 25 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) TBD Pb-Free (RoHS) 2000 Green (RoHS & no Sb/Br) 2000 Green (RoHS & no Sb/Br) 90 90 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) 2000 Green (RoHS & no Sb/Br) 2000 Green (RoHS & no Sb/Br) 250 250 1 1 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD TBD The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers,