QUADRUPLE BILATERAL ANALOG SWITCH

www.DataSheet4U.com SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 – JUNE 2003 D D D D D D D 2-V to 5.5-V VCC Operation Supports Mixed-Mode Voltage Operation on All Ports High On-Off Output-Voltage Ratio Low Crosstalk Between Switches Individual Switch Controls Extremely Low Input Current ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) D, DB, DGV, N, NS, OR PW PACKAGE (TOP VIEW) 1A 1B 2B 2A 2C 3C GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC 1C 4C 4A 4B 3B 3A RGY PACKAGE (TOP VIEW) This quadruple silicon-gate CMOS analog switch is designed for 2-V to 5.5-V VCC operation. This switch is designed to handle both analog and digital signals. Each switch permits signals with amplitudes up to 5.5 V (peak) to be transmitted in either direction. Each switch section has its own enable-input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. ORDERING INFORMATION TA PDIP – N QFN – RGY SOIC – D SOP – NS SSOP – DB TSSOP – PW PACKAGE† Tube Tape and reel Tube Tape and reel Tube Tape and reel Tube Tape and reel Tube Tape and reel 1 14 13 1C 12 4C 11 4A 10 4B 9 3B 1B 2B 2A 2C 3C 2 3 4 5 6 7 8 NC – No internal connection ORDERABLE PART NUMBER SN74AHC4066N SN74AHC4066RGYR SN74AHC4066D SN74AHC4066DR SN74AHC4066NS SN74AHC4066NSR SN74AHC4066DB SN74AHC4066DBR SN74AHC4066PW SN74AHC4066PWR GND TOP-SIDE MARKING SN74AHC4066N HA4066 AHC4066 AHC4066 HA4066 HA4066 –40°C 85°C –40 C to 85 C TVSOP – DGV Tape and reel SN74AHC4066DGVR HA4066 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2003, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3A VCC description/ordering information 1A 1 SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 – JUNE 2003 FUNCTION TABLE (each switch) INPUT CONTROL (C) L H SWITCH OFF ON logic diagram (positive logic) A VCC VCC B C One of Four Switches absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Switch I/O voltage range, VIO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V Control-input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mA I/O diode current, IIOK (VIO < 0 or VIO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA On-state switch current, IT (VIO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Package thermal impedance, θJA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W (see Note 3): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W (see Note 3): DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127°C/W (see Note 3): N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W (see Note 3): NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W (see Note 3): PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W (see Note 4): RGY package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51-7. 4. The package thermal impedance is calculated in accordance with JESD 51-5. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 – JUNE 2003 recommended operating conditions (see Note 5) VCC Supply voltage VCC = 2 V VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VCC = 2 V VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V 0 0 VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V MIN 2† 1.5 VCC × 0.7 VCC × 0.7 VCC × 0.7 0.5 VCC × 0.3 VCC × 0.3 VCC × 0.3 5.5 VCC 200 100 20 V V MAX 5.5 UNIT V VIH High-level input voltage, control inputs VIL Low-level input voltage, control inputs VI VIO ∆t/∆v t/ v Control input voltage Input/output voltage Input transition rise or fall rate V V ns/V TA Operating free-air temperature –40 85 °C † With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. Only digital signals should be transmitted at these low supply voltages. NOTE 5: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 – JUNE 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IT = –1 mA, VI = VCC or GND, VC = VIH (see Figure 1) IT = –1 mA, VI = VCC to GND, VC = VIH IT = –1 mA, VI = VCC to GND, VC = VIH VI = 5.5 V or GND VI = VCC and VO = GND, or VI = GND and VO = VCC, VC = VIL (see Figure 2) VI = VCC or GND, VC = VIH (see Figure 3) VI = VCC or GND VCC 2.3 V 3V 4.5 V 2.3 V 3V 4.5 V 2.3 V 3V 4.5 V 0 to 5.5 V MIN TA = 25°C TYP MAX 38 29 21 143 57 31 6 3 2 180 150 75 500 180 100 30 20 15 ±0.1 MIN MAX 225 190 100 600 225 125 40 30 20 ±1 µA Ω Ω Ω UNIT ron On-state switch resistance ron(p) Peak on-state resistance Difference in on-state resistance between switches Control input current ∆ron r II IS(off) Off-state switch leakage current 5.5 V ±0.1 ±1 µA IS(on) ICC Cic Cio CF On-state switch leakage current Supply current Control input capacitance Switch input/output capacitance Feed-through capacitance 5.5 V 5.5 V 1.5 5.5 0.5 ±0.1 ±1 20 µA µA pF pF pF 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 – JUNE 2003 switching characteristics over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) PARAMETER tPLH tPHL tPZH tPZL tPLZ tPHZ tPLH tPHL tPZH tPZL tPLZ tPHZ Propagation delay time Switch turn-on time Switch turn-off time Propagation delay time Switch turn-on time Switch turn-off time FROM (INPUT) A or B TO (OUTPUT) B or A TEST CONDITIONS CL = 15 pF, (see Figure 4) CL = 15 pF, RL = 1 kΩ (see Figure 5) CL = 15 pF, RL = 1 kΩ (see Figure 5) CL = 50 pF, (see Figure 4) CL = 50 pF, RL = 1 kΩ (see Figure 5) CL = 50 pF, RL = 1 kΩ (see Figure 5) MIN TA = 25°C TYP MAX 1.2 10 MIN MAX 16 UNIT ns C A or B 3.3 15 20 ns C A or B 6 15 23 ns A or B B or A 2.6 12 18 ns C A or B 4.2 25 32 ns C A or B 9.6 25 32 ns switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) PARAMETER tPLH tPHL tPZH tPZL tPLZ tPHZ tPLH tPHL tPZH tPZL tPLZ tPHZ Propagation delay time Switch turn-on time Switch turn-off time Propagation delay time Switch turn-on time Switch turn-off time FROM (INPUT) A or B TO (OUTPUT) B or A TEST CONDITIONS CL = 15 pF, (see Figure 4) CL = 15 pF, RL = 1 kΩ (see Figure 5) CL = 15 pF, RL = 1 kΩ (see Figure 5) CL = 50 pF, (see Figure 4) CL = 50 pF, RL = 1 kΩ (see Figure 5) CL = 50 pF, RL = 1 kΩ (see Figure 5) TA = 25°C MIN TYP MAX 0.8 6 MIN MAX 10 UNIT ns C A or B 2.3 11 15 ns C A or B 4.5 11 15 ns A or B B or A 1.5 9 12 ns C A or B 3 18 22 ns C A or B 7.2 18 22 ns POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 – JUNE 2003 switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) PARAMETER tPLH tPHL tPZH tPZL tPLZ tPHZ tPLH tPHL tPZH tPZL tPLZ tPHZ Propagation delay time Switch turn-on time Switch turn-off time Propagation delay time Switch turn-on time Switch turn-off time FROM (INPUT) A or B TO (OUTPUT) B or A TEST CONDITIONS CL = 15 pF, (see Figure 4)