www.DataSheet4U.com
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com
SDR2HF1.8 and SMS SDR2HF2.0 and SMS
2 AMPS 1800 - 2000 VOLTS 35 nsec HYPER FAST RECOVERY RECTIFIER
Axial Surface Mount Square Tab (SMS)
Designer’s Data Sheet
FEATURES:
• • • • • • • • • Hyper Fast Recovery: 35 nsec maximum PIV to 2400 Volts Low Reverse Leakage Current Hermetically Sealed Low Thermal Resistance Low trr Change at High Temperature (typical: trr = 55ns @ 100°C) TX, TXV, and Space Level Screening Available. Contact Factory. Fast Recovery Versions Available. Contact Factory. Single Junction Construction Replaces 1N6512 and 1N6513 in many applications.
•
MAXIMUM RATINGS
Reverse Voltage SDR2HF1.8 & SMS SDR2HF2.0 & SMS Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC, L=.125”) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, Allow Junction to Reach Equilibrium between Pulses, TA=25oC, L=.125”) Temperature Range Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount) Operating Storage
Symbol
VRRM VRWM VR IO
Value
1800 2000
Units
Volts
2
Amps
IFSM
16
Amps
TOP Tstg RθJL RθJE
-65 to +175 -65 to +200 6 4
o
o
C
C/W
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0096B
DOC
SDR2HF1.8 and SMS SDR2HF2.0 and SMS
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com
ELECTRICAL CHARACTERISTICS
Breakdown Voltage (IR = 50 µA, TA = 25oC, Pulse) Instantaneous Forward Voltage Drop (TA = 25oC, Pulse) Instantaneous Forward Voltage Drop (TA = -55oC, Pulse) Reverse Leakage Current (VR =85% rated VR, Pulse) Junction Capacitance (VR = 50 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF =500 mA, IR =1 A, IRR =250 mA, TA = 25oC) Case Outline: (Axial) SDR2HF1.8 & SMS SDR2HF2.0 & SMS IF1 =1 A IF2 =2 A IF3 =1 A IF4 =2 A TA = 25oC TA = 100oC
Symbol
BVR VF1 VF2 VF3 VF4 IR1 IR2 CJ trr
Min
1800 2000
–– –– –– –– –– –– –– –– DIM A B C D
Max
–– ––
Unit
Volts Volts Volts Volts Volts µA µA pF ns
MAX 0.170” 0.270” 0.051” ––
8.0 11.0 8.0 11.0 10 250 20 35
MIN –– 0.240” 0.045” 1.00”
Case Outline: (SMS)
DIM A B C D
MIN 0.195” 0.290” 0.020” 0.002”
MAX 0.205” 0.330” 0.030” ––
NOTES: Consult manufacturing for operating curves.
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0096B
DOC
