http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf


Toshiba Semiconductor
Toshiba Semiconductor

SAV-36 Datasheet

FM RF Power Amplifier Module


SAV-36 Datasheet Preview


TOSHIBA RF POWER AMPLIFIER MODULE
S-AV36
FM RF POWER AMPLIFIER MODULE for VHF BAND
www.datasheet4Ou.ucotmput Power :80W (Min.)
Power Gain :32.0dB (Min.)
Total Efficiency:45% (Min.)
S-AV36
MAXIMUM RATINGS (Tc = 25, ZG = ZL = 50Ω)
CHARACTERISTIC
SYMBOL
TEST CONDITION
RATING UNIT
DC Supply Voltage
VDD VGG =0V, Pi =0mW
16.5 V
DC Supply Voltage
VDD VGG5V, Pi =50mW, Po60W
16.5 V
DC Supply Voltage
VGG VDD12.5V, Pi =50mW
5.5 V
Total Current
IT VDD12.5V, Pi =50mW
15 A
Input Power
Pi VDD12.5V, VGG5V
100 mW
Output Power
Po 12.5V< VDD16.5V, VGG5V, Pi =50mW
90
W
Operating Case Temperature Range Tc (opr) VGG5V
-30~100
Storage Temperature Range
Tstg
-40~110
Caution: This maximum rating given in a sheet guarantees each item independently. When two items
or more of maximum rated items joins a device at once. It becomes the outside of a guarantee.
Please design in circuit to make it always operate within this reguration also on the worst condition.
PACKAGE OUTLINE
Unit in mm
①②③
RF Input VGG VDD
RF Outout GROUND(FRANGE)
JEDEC
JEITA
TOSHIBA
Weight: 35g
5-53P
1
04-01-06
Page 1

S-AV36
ELECTRICAL CHARACTERISTICS (Tc = 25, ZG = 50Ω)
CHARACTERISTIC
Frequency Range
Total Current ( DC operation )
www.datasheet4u.com
Output Power
Power Gain
Total Efficiency
Input VSWR
Second Harmonic
Third Harmonic
Load Mismatch
Stability
SYMBOL
frange
IT
Po
Gp
ηT
VSWRin
2nd HRM
3rd HRM
TEST CONDITION
VDD = 12.5V, VGG = 5V, Pi = 0mW
ZL = 50Ω
VDD = 12.5V
VGG = 5V
Pi = 50mW
ZL = 50Ω
VDD = 10.5 to 16.5V, VGG = 0 to 5V
Pi = 50mW
Po = 80W (VGG = adjust,@ ZL = 50Ω)
VSWR LOAD 20: 1 ALL PHASE (@2s)
VDD = 10.5 to 16.5V, VGG = 0 to 5V
Pi = 50mW
Po 80W (VGG = adjust,@ ZL = 50Ω)
VSWR LOAD 3: 1 ALL PHASE
MIN. TYP. MAX. UNIT
134 — 174 MHz
— — 15 A
80 — — W
32.0 — — dB
45 — — %
— — 3.0 —
— — -25 dB
— — -30 dB
No Degradation
All spurious output
than 60dB below
desired signal
Caution
This product has intersetting cap. Please pay attention for exceeding stress and foreign matter in your application.
And not to take away the cap.
Do not break, cut, crush or dissolve chemically. Dispose of this product properly according to law.
Do not intermingle with normal industrial or domestic waste.
This product is electrostatic sensitivity, please handle with caution.
This product is flowed high current for a VDD terminal at both RF ON and RF OFF. And it has large calorific value
for high output poer. So please use it within the limit of the maximum rating.
The view of the maximum rating of our company,
"The absolute maximum ratings are rated values which must not be exceeded during operatin,
even for an instant. And it guarantees each item independently. When two items or more of
maximum rated items joins a device at once. It becomes the outside of a guarantee. "
2 04-01-06
Page 2

SCHEMATIC
www.datasheet4uP.icom
ZG=50Ω
S-AV36
Po
ZL=50Ω
VGG
TEST FIXTURE
VDD
GROUND
(FRANGE)
C1
Pi
C2
C1
Po
C2
L
VGG
L
VDD
C1:15000pF
C2:10μF
L:φ0.8 ENAMEL WIRE8T5ID
3 04-01-06
Page 3

www.datasheet4u.com
S-AV36
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
030619EAA
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
4 04-01-06
Page 4
Part Number SAV-36
Manufactur Toshiba Semiconductor
Description FM RF Power Amplifier Module
Total Page 4 Pages
PDF Download
SAV-36 datasheet
Download PDF File
SAV-36 datasheet
View Html for PC & Mobile


Related Datasheet

SAV-36 ,

site map

webmaste! click here

contact us

Buy Components