23mm GLASS TRANSPONDER

RI-TRP-RR3P, RI-TRP-WR3P www.ti.com SCBS843 – SEPTEMBER 2001 23mm GLASS TRANSPONDER FEATURES • • • • • Best in Class Performance Through Patented HDX Technology Patented Transponder Tuning Provides Stable and High Read/Write Performance 64 Bit Read Only and 80 Bit Read/Write Types Are Available ISO 11784/11785 Compliant Insensitive to Almost All Non Metallic Materials APPLICATIONS • • • • • Access Control Vehicle Identification Container Tracking Asset Management Waste Management xxx xxx DESCRIPTION Texas Instruments’ 23 mm glass transponders are providing superior performance and operate at a resonance frequency of 134.2 kHz. Specific products are compliant to ISO/IEC 11784/11785 global open standards. Texas Instruments LF transponders are manufactured with TI’s patented tuning process to provide consistent read and write performance. Prior to delivery, the transponders undergo complete functional and parametric testing, in order to provide the high quality customers have come to expect from TI. The transponder is well suited for usage in a broad range of applications including, but not limited to, access control, vehicle identification, container tracking, asset management and waste management applications. ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) RI-TRP-RR3P Operating Temperature (Read) Operating Temperature (Program) Storage Temperature (1) –40 to +85 RI-TRP-WR3P –40 to +85 –40 to +70 –40 to +100 (+125°C for total 1000 hours, +175°C for total 5 minutes) UNIT °C °C °C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. TI-RFid is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2001, Texas Instruments Incorporated www.D RI-TRP-RR3P, RI-TRP-WR3P SCBS843 – SEPTEMBER 2001 www.ti.com OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER Functionality Memory (Bits) Memory (Pages) Operating Frequency Modulation Transmission Principle Power Source Typical Reading Range Typical Programming Range Typical Reading Time Typical Programming Time Typical Programming Cycles Case Material Protection Class EMC Signal Penetration Mechanical Shock Vibration Dimensions Weight (1) (2) Read Only 64 1 134.2 FSK (Frequency Shift Keying) 134.2 kHz / 123.2 kHz HDX (Half Duplex) Powered from the reader signal (batteryless) ≤ 60 (2) — 70 — — Glass Hermetically sealed Programmed code is not affected by normal electromagnetic interference or x-rays Transponder can be read through virtually all non-metallic material IEC 68-2-27, Test Ea; 300 g, half sine, 3 ms, 2 axes IEC 68-2-6, Test Fc; 3 g, 5 – 50 Hz, 2 axes, 24 hours per axis 20 g, 10 – 2000 Hz, 2 axes, 2.5 hours per axis Ø3.85 mm ± 0.05 mm × 23.1 mm ± 0.5 mm 0.6 g 309 100,000 30% of specified reading range ms ms cm PART NUMBER RI-TRP-RR3P 80 (1) 1 kHz RI-TRP-WR3P Read/Write UNIT We recommend that you split each 80 bit page into 64 user programmable bits plus a 16 bit wide CRC CCITT Block Check Character as is done by TI-RFid™ LF readers. Depending on RF regulation in country of use, the Reader Antenna configuration used, and the environmental conditions. 2 www.D Submit Documentation Feedback www.DataSheet4U.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2006, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Low Power Wireless www.ti.com/lpw