(RI-TRP-R9QL / RI-TRP-W9QL) 30mm DISK TRANSPONDER

RI-TRP-R9QL, RI-TRP-W9QL www.ti.com SCBS837 – OCTOBER 2001 30mm DISK TRANSPONDER FEATURES • • • • • Best in Class Performance Through Patented HDX Technology Patented Transponder Tuning Provides Stable and High Read/Write Performance 64 Bit Read Only, 80 Bit Read/Write ISO 11784/11785 Compliant Insensitive to Almost All Non Metallic Materials APPLICATIONS • • • • • Access Control Vehicle Identification Container Tracking Asset Management Waste Management DESCRIPTION Texas Instruments’ 30 mm disk transponder provides superior performance and operates at a resonance frequency of 134.2 kHz. Specific products are compliant to ISO/IEC 11784/11785 global open standards. Texas Instruments LF transponders are manufactured with TI’s patented tuning process to provide consistent read and write performance. Prior to delivery, the transponders undergo complete functional and parametric testing, in order to provide the high quality customers have come to expect from TI. The transponder is well suited for usage in a broad range of applications including, but not limited to, access control, vehicle identification, container tracking, asset management and waste management applications. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. TI-RFid is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2001, Texas Instruments Incorporated RI-TRP-R9QL, RI-TRP-W9QL SCBS837 – OCTOBER 2001 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) RI-TRP-R9QL Operating Temperature Storage Temperature (1) –25 to +85 –40 to +100 RI-TRP-W9QL –25 to +70 –40 to +100 UNIT °C °C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER Functionality Memory (Bits) Memory (Pages) Operating Frequency Modulation Transmission Principle Power Source Typical Reading Range Typical Programming Range Typical Reading Time Typical Programming Time Typical Programming Cycles @ 25°C Case Material Protection Class EMC Signal Penetration Mechanical Shock Vibration Dimensions Weight (1) (2) Read Only 64 1 134.2 FSK (Frequency Shift Keying) 134.2 kHz / 123.2 kHz HDX (Half Duplex) Powered from the reader signal (batteryless) ≤ 60 (2) — 70 — — Poly-Oxy-Methylen (POM), black IP 67 Programmed code is not affected by normal electromagnetic interference or x-rays Transponder can be read through virtually all non-metallic material IEC 68-2-27, Test Ea; 1500 g, 1 ms, half sine, 3 axes, 6 shocks per axis IEC 68-2-6, Test Fc; 25 g, 10 - 2000 Hz, 3 axes, 10 cycles per axis   29.4 mm ± 0.5 mm × 8.4 mm ± 0.4 mm 8 g 309 100,000 30% of specified reading range ms ms cm PART NUMBER RI-TRP-R9QL 80 (1) 1 kHz RI-TRP-W9QL Read/Write UNIT We recommend that you split each 80 bit page into 64 user programmable bits plus a 16 bit wide CRC CCITT Block Check Character as is done by TI-RFid™ LF readers. Depending on RF regulation in country of use, the Reader Antenna configuration used, and the environmental conditions. 2 Submit Documentation Feedback