HF Reader System Series 6000 Gate Antenna

RADIO FREQUENCY IDENTIFICATION SYSTEMS Data Sheet HF Reader System Series 6000 Gate Antenna This antenna is single-loop transmit/receive matching electronics This Antenna is aasingle-loop antenna with pre-set antenna with preset matching electronics for a transmitter frequency of 13.56MHz and impedance of 50Ω. Specifications: Part number Operating Frequency Impedance Maximum RF power Operating Temperature Storage Temperature Case Material Protection Class Vibration www.DataSheet4U.com RI-ANT-T01A 13.56MHz 50 Ohm ± 10 Ohm ∠ 0° ± 13° 8W -25°C to +55°C -25°C to +60°C Plastic ABS, black IP65 According to IEC-68-2-6 (10Hz to 150Hz: 0.15mm/2g) According to IEC-68-2-27 (acceleration: 30g) 337mm x 322mm x 38mm 337mm x 322mm x 40mm (incl. screw heads) 700g SMA male (50 Ohm) Type: RG58; Length: 3.6m ± 0.1m Shock Dimensions (L x W x H) Weight Connector Cable 337±2 322±2 38±0,5 28±0,5 Readout Pattern Tag orientation 1 Tag orientation 2 267±1 322±2 5, 6± 0, 2 13 0,0 -1,0 TAG 1 TAG 2 40+0,5 -1,0 267±1 For more information, contact the sales office or distributor nearest you. This contact information can be found on our web site at: http://www.ti-rfid.com Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by TI. © Copyright 2001 Texas Instruments Incorporated. 11-08-22-005 08/01