(RI-ANT-x0xx) SERIES 2000 ANTENNAS

RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A www.ti.com SCBS845 – MARCH 2002 SERIES 2000 ANTENNAS FEATURES • • • • • Best in Class Performance Through Patented HDX Technology Protection Class IP 65 and Higher (Exception: RI-ANTG04E) 6 Form Factors available Proven in Harsh Industrial Environments Easy to Install and Use APPLICATIONS • • • • • Access Control Vehicle Identification Container Tracking Asset Management Waste Management www.DataSheet4U.com DESCRIPTION These antenna products connect to Radio Frequency Modules (RFM) and reader/writers to form the interface to the low frequency (LF) 134.2 kHz Texas Instruments transponders. In combination with a reader/writer they transmit energy and signals to the transponder and receive the response from the tag. There are three standard gate antennas (small, medium and large), two standard stick antennas with 1 or 3 meter cable length and a stick antenna specially designed for use with the Mini-RFM available for usage in low frequency systems. Each antenna is capable of creating a specific size and shape of read zone to meet the requirements of the target application. In general the gate antennas create a large read zone including greater read distance, while the stick antennas provide a more focused read zone and an ability to discriminate between transponders. The antennas are well suited for usage in a broad range of applications including, but not limited to, access control, vehicle identification, container tracking, asset management and waste management applications. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2002, Texas Instruments Incorporated RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A SCBS845 – MARCH 2002 www.ti.com GATE ANTENNAS – SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) RI-ANT-G01E Operating Temperature Storage Temperature –30 to +60 –40 to +70 RI-ANT-G02E –30 to +60 –40 to +70 RI-ANT-G04E –30 to +60 –40 to +70 UNIT °C °C OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER Inductance Protection Class Vibration Case Material Dimensions (mm) Weight Cable Length Connection Terminals PART NUMBER RI-ANT-G01E Typically 27 µH @ 134.2 IP 65 IP 65 RI-ANT-G02E Typically 27 µH @ 134.2 IP 44 RI-ANT-G04E Typically 26 µH @ 134.2 UNIT kHz Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation) UVSHIPS (UV Stabilized High Impact Polystyrol) 715 ± 5 × 270 ± 3 × 25 ± 1 Typically 745 1 200 ± 3 × 200 ± 3 × 25 ± 1 Typically 425 1 1018 ± 5 × 518 ± 5 × 47 ± 5 Typically 2500 — 1/4 inch push-on (automotive type) Suitable for pole or wall g m Spade/Tongue, stud hole 3.5 mm, width 7.5 mm Use non-metallic clamps, standard screws and washers through 6.5mm pre-drilled holes, so that the screw hole is flush with the mounting. Mounting material is not supplied with the antenna. Mounting 2 Submit Documentation Feedback www.ti.com RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A SCBS845 – MARCH 2002 STICK ANTENNAS – SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) RI-ANT-S01C Operating Temperature Storage Temperature –30 to +70 –40 to +85 RI-ANT-S02C –30 to +70 –40 to +85 RI-ANT-P02A (FOR RI-RFM-003B) –30 to +70 –40 to +85 UNIT °C °C OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PART NUMBER PARAMETER Inductance Protection Class Vibration Case Material Dimensions (mm) Weight Cable Length Connection Terminals Mounting RI-ANT-S01C Typically 27 µH @ 134.2 IP 66 RI-ANT-S02C RI-ANT-P02A (FOR RI-RFM-003B) IP 65 UNIT kHz Typically 27 µH @ 134.2 Typically 116 µH @ 134.2 IP 66 Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation) Glass reinforced epoxy (grey) 140 ± 2 × 21 ± 2 (dia.) Typically 134 1 Ring lugs: 3.5 mm inside diameter 7.5 mm outside diameter 140 ± 2 × 21 ± 2 (dia.) Typically 185 3 133 ± 1 × 21.3 ± 1 (dia.) Typically 105 0.1 g m Ring lugs: Ring lugs: 3.5 mm inside diameter 2.8 mm inside diameter 7.5 mm outside diameter 6.0 mm outside diameter Use non-metal clamps. Mounting material is not supplied with the antenna. Readout Pattern of Ferrite Rod (Stick) and Gate Antennas Trp. 1 reading field Trp. 2 reading field Trp. 1 Trp. 1 Trp. 2 Trp. 2 Stick Antenna Gate Antenna Submit Documentation Feedback 3 PACKAGE OPTION ADDENDUM www.ti.com 31-Jan-2007 PACKAGING INFORMATION Orderable Device RI-ANT-G01E RI-ANT-G02E RI-ANT-G04E RI-ANT-S01C-00 (1) Status (1) ACTIVE ACTIVE ACTIVE ACTIVE Package Type Package Drawing Pins Package Eco Plan (2) Qty 1 1 1 1 1 1 1 1 TBD TBD TBD TBD Lead/Ball Finish Call TI Call TI Call TI Call TI MSL Peak Temp (3) Call TI Call TI Call TI Call TI The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under