CE
CHENYI ELECTRONICS
FEATURES
Ideal for printed circuit board Reliable low cost construction Surge overload rating:50 A peak
RB151 THRU RB157
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
MECHANICAL DATA
. Terminal: Plated leads solderable per MIL-STD 202E, method 208C . Case: UL-94 Class V-0 recognized Flame Retardant Epoxy . Polarity: Polarity symbol marked on body . Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified current at Ta=25 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.0A Maximum DC Reverse Voltage Ta=25 at rated DC blocking voltage Ta=100 Tyoical Junction Capacitance Operating Temperature Range Storage and operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Ir Cj Tj Tstg Vf 1.1 10.0 1.0 24 -55 to +125 -55 to +150 V A mA pF Ifsm 50 A If(av) 1.5 A Vrrm Vrms Vdc RB 151 50 35 50 RB 152 100 70 100 RB 153 200 140 200 RB 154 400 280 400 RB 155 600 420 600 RB 156 800 560 800 RB 157 1000 700 1000 , unless otherwise stated,
units
v v v
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2
CE
CHENYI ELECTRONICS
RB151 THRU RB157
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
RATINGS AND CHARACTERISTIC CURVES RB151 THRU RB157
FIG.1-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE
FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 2 of 2
