(PS9687L1 / PS9687L2) 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE

www.DataSheet4U.com PHOTOCOUPLER PS9687L1,PS9687L2 HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER −NEPOC FOR CREEPAGE DISTANCE OF 8 mm Series− DESCRIPTION The PS9687L1 and PS9687L2 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9687L1 and PS9687L2 are designed specifically for long creepage-distance as well as high common mode transient immunity (CMR) and high speed digital output type. Consequently, they are suitable for high speed logic interface that needs long creepage-distance (8 mm) on mounting. The PS9687L1 is in a plastic DIP (Dual In-line Package) and the PS9687L2 is lead bending type (Gull-wing) for surface mounting. FEATURES • Long creepage distance (8 mm MIN.) • High common mode transient immunity (CMH, CML = ±20 kV/µs TYP.) • High isolation voltage (BV = 5 000 Vr.m.s.) • High-speed response (10 Mbps) • Pulse width distortion (⏐tPHL − tPLH⏐ = 15 ns TYP.) • Open collector output • Ordering number of tape product: PS9687L2-E3, E4: 1 000 pcs/reel • Safety standards • UL approved: File No. E72422 • BSI approved: No. 8990/8991 • DIN EN60747-5-2 (VDE0884 Part2) approved: No.40008906 (Option) 1 2 3 4 8 PIN CONNECTIONS (Top View) 7 6 5 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC APPLICATIONS • FA Network • Measurement equipment • PDP Document No. PN10573EJ01V0DS (1st edition) Date Published July 2005 CP(K) PS9687L1,PS9687L2 PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9687L1 9.25+0.5 –0.25 8 5 10.16 1 3.5±0.3 4 6.5±0.5 0.50±0.15 0.25 M 2.54 0.84±0.43 0 to 15˚ Lead Bending Type PS9687L2 +0.5 9.25–0.25 8 5 3.5±0.3 0.84±0.43 0.9±0.25 0.5±0.15 0.25 M 2.54 11.8±0.4 2 Data Sheet PN10573EJ01V0DS 0.25±0.2 1 4 6.5±0.5 PS9687L1,PS9687L2 FUNCTIONAL DIAGRAM 8 2 6 3 5 Shield LED ON OFF Output L H MARKING EXAMPLE JAPAN PS9687 NL503 N Type Number Assembly Lot No. 1 pin Mark Initial of NEC (Engraved mark) N L 5 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code Data Sheet PN10573EJ01V0DS 3 PS9687L1,PS9687L2 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS9687L1 PS9687L2 PS9687L2-E3 PS9687L2-E4 PS9687L1-V PS9687L2-V PS9687L2-V-E3 PS9687L2-V-E4 PS9687L1-A PS9687L2-A PS9687L2-E3-A PS9687L2-E4-A PS9687L1-V-A PS9687L2-V-A PS9687L2-V-E3-A PS9687L2-V-E4-A Embossed Tape 1 000 pcs/reel Magazine case 50 pcs DIN EN60747-5-2 (VDE0884 Part2) approved (Option) PS9687L1 PS9687L2 Embossed Tape 1 000 pcs/reel Pb-Free Magazine case 50 pcs Packing Style Safety Standard Approval Standard products (UL, BSI approved) Application Part Number* PS9687L1 PS9687L2 1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Forward Current *1 Symbol IF VR VCC VO IO *2 Ratings 30 5 7 7 25 40 5 000 −40 to +85 −55 to +125 Unit mA V V V mA mW Vr.m.s. °C °C Reverse Voltage Detector Supply Voltage Output Voltage Output Current Power Dissipation PC BV TA Tstg Isolation Voltage *3 Operating Ambient Temperature Storage Temperature *1 Reduced to 0.3 mA/°C at TA = 25°C or more. *2 Applies to output pin VO (Collector pin). Reduced to 1.5 mW/°C at TA = 65°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter High Level Input Current Low Level Input Voltage Supply Voltage TTL (RL = 1 kΩ, loads) Pull-up Resistance Symbol IFH VFL VCC N RL 330 MIN. 6.3 0 4.5 5.0 TYP. 10 MAX. 12.0 0.8 5.5 5 4k Ω Unit mA V V 4 Data Sheet PN10573EJ01V0DS PS9687L1,PS9687L2 ELECTRICAL CHARACTERISTICS (TA = −40 to +85°C, unless otherwise specified) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Detector High Level Output Current Low Level Output Voltage High Level Supply Current Low Level Supply Current Coupled Threshold Input Current (H → L) Isolation Resistance Isolation Capacitance Propagation Delay Time (H → L) *3 *2 Symbol VF IR Ct IOH VOL ICCH ICCL IFHL RI-O CI-O tPHL Conditions IF = 10 mA, TA = 25°C VR = 3 V, TA = 25°C VF = 0 V, f = 1 MHz, TA = 25°C VCC = VO = 5.5 V, VF = 0.8 V VCC = 5.5 V, IF = 5 mA, IOL = 13 mA VCC = 5.5 V, IF = 0 mA, VO = Open VCC = 5.5 V, IF = 10 mA, VO = Open VCC = 5 V, VO = 0.8 V, RL = 350 Ω VI-O = 1 kVDC, RH = 40 to 60%, TA = 25°C V = 0 V, f = 1 MHz, TA = 25°C VCC = 5 V, TA = 25°C RL = 350 Ω, IF = 7.5 mA, CL = 15 pF MIN. 1.4 TYP. *1 MAX. 1.8 10 Unit V 1.65 µA pF 30 1 0.35 6 11 2.5 10 11 150 100 0.6 10 13 5 µA V mA mA mA Ω 0.9 40 5 75 100 pF ns Propagation Delay Time (L → H) *3 tPLH TA = 25 °C 55 75 100 ns Rise Time Fall Time Pulse Width Distortion (PWD) *3 tr tf ⏐tPHL-tPLH⏐ 20 10 15 50 ns ns ns Propagation Delay Skew Common Mode Transient Immunity at High Level Output *4 tPSK CMH VCC = 5 V, TA = 25°C, IF = 0 mA, VO (MIN.) = 2 V, VCM = 1 kV, RL = 350 Ω 10 20 60 ns kV/µs Common Mode Transient Immunity at Low Level Output *4 CML VCC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 1 kV, RL = 350 Ω 10 20 kV/µs Data Sheet PN10573EJ01V0DS 5 PS9687L1,PS9687L2 *1 Typical values at TA = 25°C *2 Because VOL of 2 V or more may be output when LED current is input and when output power supply is on and off, confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time Pulse input (IF) (PW = 1 µ s, Duty cycle = 1/10) Input (monitor) 47 Ω 0.1 µ F VCC = 5 V Input 50% 0V 5V (IF = 7.5 mA) RL = 350 Ω VO (monitor) CL = 15 pF VOH Output 1.5 V VOL tPHL tPLH Remark CL includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity VCC = 5 V SW IF 0.1 µ F RL = 350 Ω VO (monitor) CL = 15 pF VCM VO (IF = 0 mA) VO (IF = 7.5 mA) VOH 2V 0.8 V VOL VCM 90% 10% tr tf 1 kV 0V Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. 6 Data Sheet PN10573EJ01V0DS PS9687L1,PS9687L2 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 40 50 DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 40 30 30 20 20 10 10 0 20 40 60 80 85 100 0 20 40 60 80 85 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 14 SUPPLY CURRENT vs. AMBIENT TEMPERATURE High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) Vcc = 5.5 V 12 10 8 6 4 2 0 –50 ICCH (IF = 0 mA) ICCL (IF = 10 mA) Forward Current IF (mA) 10 TA = +85˚C +50˚C +25˚C 0˚C –25˚C 1 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 –25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (˚C) OUTPUT VOLTAGE vs. FORWARD CURRENT 6 5 0.6 LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Low Level Output Voltage VOL (V) IF = 5.0 mA, VCC = 5.5 V IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA VCC = 5.0 V 0.5 0.4 0.3 0.2 0.1 0 –50 Output Voltage VO (V) RL = 350 Ω 4 3 2 1 1.0 kΩ 4.0 kΩ 0 1 2 3 4 5 –25 0 25 50 75 100 Forward Current IF (mA) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10573EJ01V0DS 7 PS9687L1,PS9687L2 THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Threshold Input Current IFHL (mA) VCC = 5.0 V, VO = 0.8 V 4 RL = 350 Ω 1.0 kΩ 4.0 kΩ 3 Propagation Delay Time tPHL, tPLH (ns) 5 140 120 tPLH: RL = 4.0 kΩ 100 tPLH: RL = 1.0 kΩ 80 60 40 tPLH: RL = 350 Ω 20 tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ IF = 7.5 mA, VCC = 5.0 V 0 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 2 1 0 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 100 Pulse Width Distortion tPHL–tPLH (ns) IF = 7.5 mA, VCC = 5.0 V Switching Time tr, tf (ns) 80 RL = 4.0 kΩ 60 200 250 SWITCHING TIME vs. AMBIENT TEMPERATURE IF = 7.5 mA, VCC = 5.0 V tr:RL = 4.0 kΩ 150 tr:RL = 1.0 kΩ tr:RL = 350 Ω 40 RL = 1.0 kΩ 100 20 RL = 350 Ω 0 –50 –25 0 25 50 75 100 50 tf:RL = 350 Ω, 1.0 kΩ, 4.0 kΩ –25 0 25 50 75 100 0 –50 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) PROPAGATION DELAY TIME vs. FORWARD CURRENT 120 Propagation Delay Time tPHL, tPLH (ns) VCC = 5.0 V 100 80 60 tPLH: RL = 350 Ω 40 20 0 5 tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ 7.5 10 12.5 15 17.5 20 tPLH: RL = 1.0 kΩ tPLH: RL = 4.0 kΩ Pulse Width Distortion tPHL–tPLH (ns) 100 PULSE WIDTH DISTORTION vs. FORWARD CURRENT 80 RL = 4.0 kΩ 60 RL = 1.0 kΩ 40 20 RL = 350 Ω 0 5 7.5 10 12.5 15 VCC = 5.0 V 17.5 20 Forward Current IF (mA) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10573EJ01V0DS PS9687L1,PS9687L2 TAPING SPECIFICATIONS (UNIT: mm) 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 1.5 +0.1 –0 4.5 MAX. 11.5±0.1 24.0±0.3 12.8±0.1 2.05±0.05 12.0±0.1 10.7±0.1 4.1±0.1 0.3±0.05 Tape Direction PS9687L2-E3 PS9687L2-E4 Pull-out direction Outline and Dimensions (Reel) 2.0±0.5 330±2.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 25.5±1.0 29.5±1.0 100±1.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange Data Sheet PN10573EJ01V0DS 9 PS9