Display Tech Manual

www.DataSheet4U.com TECHNICAL MANUAL (ver.2.0) Plasma Display: PDP-V402/V402E Down converter: PDA-4003 Tilted cradle: PDK-4001 Metal fixture for ceiling-hanging type plasma display: PDK-4002 PDK-4003 PDK-4004 PDP bracket: PDK-4005 Metal fixture for wall-hanging type plasma display: PDK-4006 Mobile cart: PDK-5008 Multiple mounting fixture for plasma display: PDM-4001 Protective filter: PDA-4002 Speaker system: PDP-S03-LR This manual gives precautions, general information, and examples for installation and handling of the plasma display and its metal fixtures. Carefully examine the structure, material, strength, and environmental conditions for the site at which the display is to be installed before selecting an installation method. If the site is unsatisfactory, venders should not sell or install the equipment. For safety In this manual, this symbol indicates important precautions. Read these precautions carefully. Note: • We are not responsible for damage caused by defective parts supplied by third parties. • The performance of the equipment is guaranteed only when assembly and adjustment are performed as described herein. • The specifications and descriptions given in this technical manual are subject to change without notice. [Installation] ¶ We sell this equipment on the assumption that it will be installed by a specialist with adequate training. The equipment must be installed by trained vendors or by your dealer. ¶ We are not responsible for injuries or damage resulting from choice of unsuitable installation sites, problems in assembly and installation, improper installation, or natural disasters. www.DataSheet4U.com Contents Features .................................................................................................................................................................. 4 specifications .......................................................................................................................................................... 6 2.1 List of specifications ..................................................................................................................................... 6 2.2 Outline drawing ............................................................................................................................................ 7 2.3 Part names ................................................................................................................................................... 8 2.4 Various pin arrangements ............................................................................................................................. 9 2.5 Remote control ........................................................................................................................................... 10 2.6 Remote control case .................................................................................................................................. 11 Installation ............................................................................................................................................................ 12 3.1 Installation environment ............................................................................................................................. 12 3.2 Installation conditions ................................................................................................................................. 14 3.2.1 Radiation .............................................................................................................................................. 14 3.2.2 Calculating calorific values ................................................................................................................... 14 3.2.3 Installation position .............................................................................................................................. 15 3.2.4 Strain on surface where equipment is installed ................................................................................... 17 3.3 Installation procedure ................................................................................................................................. 18 3.3.1 Precautions for transportation .............................................................................................................. 18 3.3.2 Unpacking ............................................................................................................................................ 18 3.3.3 Wiring ................................................................................................................................................... 20 3.4 Special installations .................................................................................................................................... 24 3.4.1 Fixing on a structure ............................................................................................................................ 24 3.4.2 Wall hanging ........................................................................................................................................ 26 3.4.3 Wall embedding ................................................................................................................................... 30 3.4.4 When the display is put in a box ......................................................................................................... 34 3.4.5 Wall hanging (vertically wall-hanging equipment) ................................................................................ 38 3.4.6 Wall embedding (vertically wall-embedding equipment) ...................................................................... 42 3.4.7 Ceiling suspension (using wires) .......................................................................................................... 46 3.4.8 Installation with the screen downward ................................................................................................ 48 3.4.9 Ceiling embedding ............................................................................................................................... 50 3.4.10 Installation on the floor ...................................................................................................................... 52 3.4.11 Installation under the floor ................................................................................................................. 54 3.4.12 Installation under the floor (using the PDM-4001) ............................................................................. 58 3.4.13 Horizontal connections ....................................................................................................................... 60 3.4.14 Vertical connections ........................................................................................................................... 61 Mounting stadard metal fixtures ........................................................................................................................ 62 4.1 Functions and features of standard metal fixtures ..................................................................................... 62 4.2 Handling standard metal fixtures ................................................................................................................ 64 4.2.1 Precautions on handling metal fixtures ................................................................................................ 64 4.2.2 Precautions for vendors performing the installation ............................................................................ 64 4.3 Stand (an accessory to PDP-V402 ) ..................................................................................... 65 4.3.1 Installing the stand ............................................................................................................................... 65 4.3.2 Outer-dimensions diagram (Unit: mm) ................................................................................................. 66 4.4 Down converter PDA-4003 ........................................................................................................................ 67 4.4.1 Specifications ....................................................................................................................................... 67 4.4.2 Outline drawing (Unit: mm) .................................................................................................................. 68 4.4.3 The outline from setting up to adjusting of down converter ................................................................ 69 4.4.4 Before using the down converter ........................................................................................................ 71 4.4.5 Mounting on the plasma display .......................................................................................................... 72 4.4.6 When mounting using only this device ................................................................................................ 75 4.4.7 Repackaging procedure ....................................................................................................................... 77 4.4.8 Operating a down converter ................................................................................................................ 78 4.5 Tilting stand: PDK-4001 .............................................................................................................................. 82 4.5.1 Specifications ....................................................................................................................................... 82 4.5.2 Outer-dimension diagram (Unit: mm) ................................................................................................... 82 4.5.3 Assembling and installing the metal fixtur